Thuren arms +stock 06 pw no lift =37s?

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
Post Reply
darwink1
Posts: 49
Joined: Thu Aug 30, 2012 10:48 am

Thuren arms +stock 06 pw no lift =37s?

Post by darwink1 » Sat Jul 25, 2015 11:23 am

Might have a line on a set of 5 nearly new 37"km2s and was wondering how theyd work with just the upgraded arms. I know both my sets of 35s rub the upper but otherwise they fit fine.

Anyone running this setbup? I dont wanna lift my truck any more than it is but would love to sport 37s again. Would be ising either the 06 stocker alloys or a spare set of 2500 steelies i have my winter tires on.


D
06 power wagon dd
1985 one tonned fj60 land cruiser ram jet 350 nv4500 atlas 2 d60/14 bolt w arbs custom bumpers/tire carrier/tube work champion beadlocks 40x17x14.5 km2s
1969 frame off resto rat modded fj40 land cruiser 2f inline 6 4 spd one pc case fj60 front/ffzj80 full float rear axles w 529 gears and aussie lockers tmr beadlocks with 39.5x17x13.5 blue label crawlers custome tube work full roll cage tied to frame extended wheel base custom cedar dash
1993 fzj80 land cruiser 2.5" lift rockin 37s SOLD
2000 Tacoma locked bumpered skid plated SOLD
1990 toyota mini truck dd SOLD
Top
User avatar
nts007
2000_Posts
2000_Posts
Posts: 2284
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: Thuren arms +stock 06 pw no lift =37s?

Post by nts007 » Sat Jul 25, 2015 11:38 am

The answer is go ahead. I ran 37" km2s on my 06 ps stock. Almost no rubbing. The thuren arms will eliminate that. Use the stock pw wheels. The km2s are a bit narrower than most of the 37's so there is less issues.
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more
Top
darwink1
Posts: 49
Joined: Thu Aug 30, 2012 10:48 am

Re: Thuren arms +stock 06 pw no lift =37s?

Post by darwink1 » Sat Jul 25, 2015 1:27 pm

Right on man, thanks!

D
06 power wagon dd
1985 one tonned fj60 land cruiser ram jet 350 nv4500 atlas 2 d60/14 bolt w arbs custom bumpers/tire carrier/tube work champion beadlocks 40x17x14.5 km2s
1969 frame off resto rat modded fj40 land cruiser 2f inline 6 4 spd one pc case fj60 front/ffzj80 full float rear axles w 529 gears and aussie lockers tmr beadlocks with 39.5x17x13.5 blue label crawlers custome tube work full roll cage tied to frame extended wheel base custom cedar dash
1993 fzj80 land cruiser 2.5" lift rockin 37s SOLD
2000 Tacoma locked bumpered skid plated SOLD
1990 toyota mini truck dd SOLD
Top
User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3657
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Thuren arms +stock 06 pw no lift =37s?

Post by olyelr » Mon Jul 27, 2015 7:45 am

Not to mention the BFG's run quite small height wise too. I have seen the new 37" ko2's which dont really even measure 36".
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:
Top
User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3657
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Thuren arms +stock 06 pw no lift =37s?

Post by olyelr » Mon Jul 27, 2015 7:49 am

Heres a link to the thread i was referring to. Less than 35.5" tall when not even under a vehicle. Kinda pitifull to call it a 37" tire imo.

http://www.jk-forum.com/forums/jk-show- ... ed-318966/
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:
Top
Post Reply

Return to “Power Wagon Talk”