Stuff that doesn't pertain to PWs and general chit-chat
-
Wirebrush
- Posts: 35
- Joined: Tue Dec 01, 2015 12:52 pm
- Model Year: 2014
Post
by Wirebrush » Fri Apr 01, 2016 11:27 pm
Next it's getting a set of 37x12.50s and some custom nerf bars, then maybe a healthy dose of beadliner.
-
olyelr
- 2000_Posts

- Posts: 3657
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Post
by olyelr » Sat Apr 02, 2016 10:00 am
Nice setup, wirebrush!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

-
OffroadTreks
- Moderator

- Posts: 2434
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
-
Contact:
Post
by OffroadTreks » Sat Apr 02, 2016 10:07 am
Wow very nice! Who built your rack? That's on my list of stuff for this year. I've got the ram boxes too.
-
TheDirtRoad
- 50_Posts

- Posts: 174
- Joined: Fri Apr 11, 2014 6:28 pm
- Model Year: 2014
- Location: Green River, Wyoming
Post
by TheDirtRoad » Sat Apr 02, 2016 11:03 am
Nice, How is your rack mounted on the rambox?
-
Wirebrush
- Posts: 35
- Joined: Tue Dec 01, 2015 12:52 pm
- Model Year: 2014
Post
by Wirebrush » Sat Apr 02, 2016 11:52 am
I built the rack myself. It is attached via heavy duty ratchet straps to the tie downs in the bed. I glued 1" closed cell foam rubber to the underside of the "feet" that rest on the bed corners to help evenly distribute the weight and to prevent the rack from sliding around.
-
SheepdogOutdoorsman
- 1000_Posts

- Posts: 1061
- Joined: Fri Oct 18, 2013 10:03 am
- Location: Mesa, AZ
Post
by SheepdogOutdoorsman » Sat Apr 02, 2016 12:56 pm
Nice setup ... When SHTF happens you'll be one of the few that survive!
Sent from my iPhone using Tapatalk
The Sheepdog Outdoorsman
2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...
-
Colibri
- 1000_Posts

- Posts: 1713
- Joined: Mon Jun 08, 2015 5:44 pm
- Model Year: 2009
Post
by Colibri » Sat Apr 02, 2016 1:52 pm
Awesome setup! Nice work sir
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
-
FirerescuePW
- 1000_Posts

- Posts: 1661
- Joined: Sun May 20, 2012 12:51 pm
- Location: North Wales, PA
Post
by FirerescuePW » Sat Apr 02, 2016 1:56 pm
That's pretty clever. I like that it is easily removable. If you don't mind, post a few more detailed pics of it.
'05 Mineral Gray Power Wagon QC #1005
WINCH MOB PROUD!
SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
-
Wirebrush
- Posts: 35
- Joined: Tue Dec 01, 2015 12:52 pm
- Model Year: 2014
Post
by Wirebrush » Sat Apr 02, 2016 2:55 pm
The cross bars that the tent is attached to are 1.5" .125" wall square tubing and the rest is 2" .125" wall square tube.
-
olyelr
- 2000_Posts

- Posts: 3657
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Post
by olyelr » Sat Apr 02, 2016 5:04 pm
Wow. That looks like phenomenal fab work.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

-
Wirebrush
- Posts: 35
- Joined: Tue Dec 01, 2015 12:52 pm
- Model Year: 2014
Post
by Wirebrush » Sat Apr 02, 2016 6:22 pm
olyelr wrote:Wow. That looks like phenomenal fab work.
Thanks. I'm a weldor/fabricator by trade. I put the bumpers together from a Move Bumpers kit too. It took some work to fab custom mounts that bolt in place of the tow hooks since the winch is in the way of the standard mounts.
-
olyelr
- 2000_Posts

- Posts: 3657
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Post
by olyelr » Sat Apr 02, 2016 7:58 pm
You made the bumper too?! Is the winch still in the factory cradle, or did it move out with the bumper?
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

-
OffroadTreks
- Moderator

- Posts: 2434
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
-
Contact:
Post
by OffroadTreks » Sat Apr 02, 2016 9:01 pm
Great work Wirebrush. A little jealous. Part of my plans are to do like you. I saw the AEV Ram with Ram Boxes and roof topper, and have been wanting to build a custom rack myself to do the same.
Really like how you dropped it low to keep the wind resistance down. Any plans to add a bed slide or anything?
-
Wirebrush
- Posts: 35
- Joined: Tue Dec 01, 2015 12:52 pm
- Model Year: 2014
Post
by Wirebrush » Sat Apr 02, 2016 9:07 pm
olyelr wrote:You made the bumper too?! Is the winch still in the factory cradle, or did it move out with the bumper?
The winch is in the factory mount. I cut a little larger opening in the Move Bumper which gives me room to get my hand on the gear engagement lever on the winch and plenty of clearance for the winch rope.
-
Wirebrush
- Posts: 35
- Joined: Tue Dec 01, 2015 12:52 pm
- Model Year: 2014
Post
by Wirebrush » Sat Apr 02, 2016 9:12 pm
MikeKey wrote:Great work Wirebrush. A little jealous. Part of my plans are to do like you. I saw the AEV Ram with Ram Boxes and roof topper, and have been wanting to build a custom rack myself to do the same.
Really like how you dropped it low to keep the wind resistance down. Any plans to add a bed slide or anything?
I was looking into building a bed slide until I found this company:
http://www.slide-master.com/products/166-bedslide I'd be hard pressed to build a better one for less. When I swap to 37" tires I'll probably add Tire-gate or custom build a hitch gate.
-
2wagons1driveway
- 2000_Posts

- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Post
by 2wagons1driveway » Sat Apr 02, 2016 10:31 pm
Those are awsome pictures! Just WOW !!!! ^^^^
Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
-
15wbpw
- 50_Posts

- Posts: 65
- Joined: Tue Feb 10, 2015 2:06 pm
- Model Year: 2014
Post
by 15wbpw » Sat Apr 02, 2016 11:09 pm
Wirebrush wrote:olyelr wrote:Wow. That looks like phenomenal fab work.
Thanks. I'm a weldor/fabricator by trade. I put the bumpers together from a Move Bumpers kit too. It took some work to fab custom mounts that bolt in place of the tow hooks since the winch is in the way of the standard mounts.
hey its my trucks badass twin. really dig that rear mount setup.
-
Colibri
- 1000_Posts

- Posts: 1713
- Joined: Mon Jun 08, 2015 5:44 pm
- Model Year: 2009
Post
by Colibri » Sat Apr 02, 2016 11:50 pm
Borax wash is a beautiful place, it's good to see a pw in its natural environment

Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
-
Stickman
- 500_Posts

- Posts: 829
- Joined: Mon Nov 18, 2013 12:02 am
- Model Year: 2012
- Location: Wayland, MO
Post
by Stickman » Mon Apr 04, 2016 9:39 am
-
Will
- 2000_Posts

- Posts: 2601
- Joined: Mon Jan 27, 2014 7:16 am
- Model Year: 2010
Post
by Will » Mon Apr 04, 2016 9:49 am
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
-
Mule
- 500_Posts

- Posts: 567
- Joined: Sat Nov 22, 2014 2:29 am
- Location: Rocky Mtns
-
Contact:
Post
by Mule » Tue Apr 05, 2016 1:18 am
New ramp.

-
olyelr
- 2000_Posts

- Posts: 3657
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Post
by olyelr » Tue Apr 05, 2016 8:18 am
Nice!
Can you haul the ramp easily? Like does it fold up or something?
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

-
2wagons1driveway
- 2000_Posts

- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Post
by 2wagons1driveway » Tue Apr 05, 2016 9:03 am
dirty truck but clean long arms and 3.5" IBP!!
Sent from Canada
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"