ADD bumper

jseal5757 · Post by **jseal5757** » Sun Nov 15, 2015 7:09 pm

has anyone used or seen the ADD bumper i want the stealth bumper and wanna know how it fits.
http://www.addictivedesertdesigns.com/f ... ory-winch/

olyelr · Post by **olyelr** » Sun Nov 15, 2015 9:18 pm

They dont show it for a '14 and up, but I dont know if anything was changed either.

mcdozendriver · Post by **mcdozendriver** » Mon Nov 16, 2015 1:34 am

It is a slick setup but that price tag is slightly ridiculous. I saw a couple on various rigs at Sema and they looked great and solid. I also saw several trucks with fusion bumpers. They are a plate style but don't have the exorbitant overhang nor do they stick out a foot from the fromt of the truck.If I end up replacing my stock bumper I am going to look into that one.

Will · Post by **Will** » Mon Nov 16, 2015 7:55 am

That's my top pick next to Thurens but it wouldn't look right on my truck at the moment since I have a topper so I'm waiting until I do my next change.

jseal5757 · Post by **jseal5757** » Mon Nov 16, 2015 9:42 am

The bumper is $2400cdn so it's pretty pricy

RustyPW · Post by **RustyPW** » Mon Nov 16, 2015 10:37 am

mcdozendriver wrote:It is a slick setup but that price tag is slightly ridiculous. I saw a couple on various rigs at Sema and they looked great and solid. I also saw several trucks with fusion bumpers. They are a plate style but don't have the exorbitant overhang nor do they stick out a foot from the fromt of the truck.If I end up replacing my stock bumper I am going to look into that one.

I have a fusion rear bumper. And it's a piece of SHIT!!!!! Not enough bracing, the welds are thin and incomplete, brackets welded crooked, etc.

Here's my write-up from DT.

http://www.dodgetalk.com/forums/showthread.php?t=274069

mcdozendriver · Post by **mcdozendriver** » Mon Nov 16, 2015 9:02 pm

Thanks for the input and review. Will not be pursuing the fusion bumper. Back to the drawing board.

2011RPW · Post by **2011RPW** » Mon Nov 16, 2015 10:47 pm

jseal5757 wrote:The bumper is $2400cdn so it's pretty pricy

If I lived further north, I'd figure out a way to get parts to you guys cheaper. Jeez, that sucks you guys having to pay so much more.

olyelr · Post by **olyelr** » Mon Nov 16, 2015 11:38 pm

Winch plate limit is 10,500 pounds.

2wagons1driveway · Post by **2wagons1driveway** » Mon Nov 16, 2015 11:51 pm

I have some pictures of an add stealth bumper that the frame horns are bent on it from pulling someone out. The company makes awsome shit if we custom order it but if you buy off the shelf your getting a much thinner frame horn and tube. In most circumstances you'll be fine but it depends on how hard you plan on using it. I can never remember if they have good tow hooks either or if you have to "burn some
Onl

Sent from Canada

2wagons1driveway · Post by **2wagons1driveway** » Mon Nov 16, 2015 11:56 pm

Have you seen the Thuren fab bumper? It's pretty effin slick!!! But no designs for p.wagon yet. I'm hopeing when I go down there to pick up parts he can look and measure my factory fairlead and see how he can make his bumpers fit our trucks cause their pretty tough and offer a ton of ground clearance compared to factory and tire clearance!

Sent from Canada

Will · Post by **Will** » Tue Nov 17, 2015 6:48 am

That's my favorite. He's supposed to be working on the PW one.

2011RPW · Post by **2011RPW** » Tue Nov 17, 2015 6:55 am

Or use Patton Fab horns and build your own custom setup.

Will · Post by **Will** » Tue Nov 17, 2015 7:10 am

2wagons1driveway · Post by **2wagons1driveway** » Tue Nov 17, 2015 9:42 am

I dunno how good the 4th gens look with a tube bumper. I LOVE them
On the third gens but fourth seem to look good with the fab designs

Sent from Canada

2011RPW · Post by **2011RPW** » Tue Nov 17, 2015 1:07 pm

I want one. But more of a Thuren, Patton, or Creative fab bumper would be my choice

2wagons1driveway · Post by **2wagons1driveway** » Tue Nov 17, 2015 2:12 pm

Those all look good. Dammit lol

Sent from Canada

GunniPWguy · Post by **GunniPWguy** » Wed Nov 18, 2015 12:36 pm

Sweet rides!

adeluca73 · Post by **adeluca73** » Thu Nov 19, 2015 10:33 pm

Love that Theuren concept one the best, much more functional than the AEV, & probably a lot lighter too. I'll wait...

Jnallison · Post by **Jnallison** » Fri Nov 20, 2015 10:14 am

Ill be building my own. It will look somewhat like the ADD. Its the only one I have found that offers the most ground clearance and retains the factory winch mount. I refuse to pay that much, its ridiculous, I ended up building my own sliders months before anyone came out with anything and saved quite a bit. Look just as good and have been Moab and Farmington tested. Pretty sure I can do the same with the front and rear bumpers.

Will · Post by **Will** » Fri Nov 20, 2015 9:28 pm

Take notes, you might be building more than one hahaha

2wagons1driveway · Post by **2wagons1driveway** » Sat Nov 21, 2015 1:49 am

Lol yes like what will said!

Legit though if you build your own bumper you can save some dough and you'll be satisfied with it. I ain't satisfied with mine but I'm in the situation that looks aren't everything and I can go wheeee when the other wagons are infront or behind!

plus mines only like 1100$ Canadian so I don't care if it gets squished lol

Sent from Canada

Jnallison · Post by **Jnallison** » Sat Nov 21, 2015 9:33 am

Will wrote:Take notes, you might be building more than one hahaha

That is what happened with the sliders, there a couple on here running them.

Power Wagon Registry

ADD bumper

ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper

Re: ADD bumper