I'm not registered over at Dodge Talk.....never was.AceMan wrote:You should also post it at DT for more exposure.
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
Rear Diff Skid Plate? Yes! Mission Accomplished!
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell
2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
Ken,Ken G. wrote:I'm not registered over at Dodge Talk.....never was.AceMan wrote:You should also post it at DT for more exposure.
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
Can you create an account at DT? It will be easier when providing links and such, to threads over there. It's a bit tediuous to copy/paste pics, info, etc, where if you had an acct, I can just post a link to the thread.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
Ace, I am now registered on DT, but I know I'll still spend most all of my time over here on PWR with my own kind of peeps! 
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell
2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
Good. And I understand you'll be here, that's fine. At least now you can see what's going on over there. I think you should also create a sig, post a few posts, after 5 posts you can post pics of your truck. And of course spend time here!Ken G. wrote:Ace, I am now registered on DT, but I know I'll still spend most all of my time over here on PWR with my own kind of peeps!
At least you will now see my thread with the diff plate requests.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
Check.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell
2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
-
RckyMtnRam
- Posts: 30
- Joined: Fri Jul 19, 2013 12:47 pm
- Model Year: 2013
- Location: Westminster, CO
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
Did these rear diff skid plates ever make it into production? Thanks.
Craig
2013: AMP steps, BAK cover, warn wireless controller, mopar level, 5100s, volant/Donaldson, catch can, Thuren bar and arms.
2013: AMP steps, BAK cover, warn wireless controller, mopar level, 5100s, volant/Donaldson, catch can, Thuren bar and arms.
Re: Rear Diff Skid Plate?
Checking to see if this diff guard is available?
quote="Ken G."]The new rear diff skid plate is on my truck!! It turned out great....can't wait to test it! Got my rock sliders, too. Iron Pig did a great job. Check out my post under the Member Builds section for info and photos. Plus, I'll need to get a list started to get numbers of how many
folks might want to get one of these rear diff skid plates. I'll test it out, then pull it off so that they can get laser cut production models made. We can do a group buy for $ savings, too. Iron Pig would be the first shop to produce rear diff protection expressly for our Power Wagons! 
[/quote]
quote="Ken G."]The new rear diff skid plate is on my truck!! It turned out great....can't wait to test it! Got my rock sliders, too. Iron Pig did a great job. Check out my post under the Member Builds section for info and photos. Plus, I'll need to get a list started to get numbers of how many
folks might want to get one of these rear diff skid plates. I'll test it out, then pull it off so that they can get laser cut production models made. We can do a group buy for $ savings, too. Iron Pig would be the first shop to produce rear diff protection expressly for our Power Wagons! [/quote]-
GunniPWguy
- 500_Posts
- Posts: 954
- Joined: Fri May 25, 2012 11:52 am
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
Still interested!
2005 Black Pow Wagon mods: DT Profab Steering Brace, Gibson superflow catback single exhaust system, Locker Bypass, Moog ball joints (see how long they last), New OEM track bar bushings, T-steering upgrade w/ Bilstein 5100 steering damper, Power everything, Heated leather seats, (keeps the better half happy), Rear window defrost, Bilstein 5100 shocks, 35x12.5x17 Toyo AT2 Extremes, Customized H2 alloy wheels, Original rock rails with family friendly steps welded on, Tri fold tonneau, Hi-lift extreme jack, Tool box along with all the essential PW gear. New winch cable, Winch TPS bypass, Cardan joint grease zerk discovery. New front grille assembly. Magnesium Chloride under coating.
If you ever happen to see me running somewhere, you should start running too.
If you ever happen to see me running somewhere, you should start running too.
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
Looks like it's been 3years since the prototype(?) was made and no info so I'm assuming this project is dead. Last night I took some cardboard and tried to mock up a glide plate. I found 2 attachment points for the rear section of the plate, but cant figure out a front attachment point. There is a large rectangle shaped protusion on he drivers side of the diff which would eliminate the use of a u-bolt. Maybe a clamp that conforms to that shape would work? Any ideas on this?
-
FirerescuePW
- 1000_Posts
- Posts: 1661
- Joined: Sun May 20, 2012 12:51 pm
- Location: North Wales, PA
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
KenG, the guy who was doing this, just kinda disappeared. Shame. Nice guy. Interesting life experiences, shall we say.
Maybe you could contact Iron Pig and ask if they still have the file, plans, whatever.
Maybe you could contact Iron Pig and ask if they still have the file, plans, whatever.
'05 Mineral Gray Power Wagon QC #1005
WINCH MOB PROUD!
SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
WINCH MOB PROUD!
SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Rear Diff Skid Plate? Yes! Mission Accomplished!
I think Kenny G went overseas. He's an Army contractor. That would explain why he's been busy.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.