FRONT LICENSE PLATE MOD

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
User avatar
fbenross
500_Posts
500_Posts
Posts: 601
Joined: Thu May 24, 2012 8:35 pm
Location: Moss Beach CA

FRONT LICENSE PLATE MOD

Post by fbenross » Sat Jun 28, 2014 8:36 pm

This was a monumental mod...very complicated and expensive .. :mrgreen: I never liked the stock license plate mounting setup...big plastic thing, sticking out, and low, just waiting to get crushed. So I moved it. I had a nice 8" aluminum hinge in the junk drawer. Made a metal hook from some thick wire to hold it up. I didn't drill the bumper or plastic so it can go back to stock if needed.
Attachments
DSCN5212.JPG
DSCN5213.JPG
DSCN5217.JPG
DSCN5220.JPG
Ben CW3 2/10th AIR CAV FT ORD CA. (retired)
2006 Power Wagon-6spd, rear air bags, Diff Guards:Carli F. RockCrusher R., matching rim for spare tire, removed back seat for storage----I own the following: 2005 Hallmark pop-top Camper---1970 Scout 800 4x4 w/232ci 6cyl 4spd---2006 Yamaha XT225 Dual Sport---Pictures @ https://www.flickr.com/photos/powerwagon/collections

User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1061
Joined: Fri Oct 18, 2013 10:03 am
Location: Mesa, AZ

Re: FRONT LICENSE PLATE MOD

Post by SheepdogOutdoorsman » Sat Jun 28, 2014 8:56 pm

Another nail in the coffin for California! No front license plate required here in AZ ... Socialism vs Liberty!
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...

Ducky's Dad
1000_Posts
1000_Posts
Posts: 1522
Joined: Thu May 24, 2012 10:55 pm

Re: FRONT LICENSE PLATE MOD

Post by Ducky's Dad » Sat Jun 28, 2014 9:20 pm

I just took mine off and put it under the passenger seat. Ticket is a $10 fixit deal, but is a nuisance. Last time I had a "discussion" with the highway patrol, I convinced them that the plate interferes with my winch and I forgot to put it back on after winching. Yea, that's the story....

User avatar
MOPARManiac
250_Posts
250_Posts
Posts: 418
Joined: Wed Jul 25, 2012 10:22 am
Location: Wyoming

Re: FRONT LICENSE PLATE MOD

Post by MOPARManiac » Sat Jun 28, 2014 9:41 pm

SheepdogOutdoorsman wrote:Another nail in the coffin for California! No front license plate required here in AZ ... Socialism vs Liberty!
That is a good idea, I do not like how far my plate hangs down as well.

I don't want to turn this in a political thread, but Socialism vs. Liberty because California requires a front plate? I would love to hear an explanation as it is a bit of a stretch. Arizona still requires vehicle registration, a drivers license, insurance just like California and every other state. Whether the state requires a front plate is a moot point.
2010 Power Wagon in Bright Silver Metalic, Sun Roof, Power sliding rear window, Nav, Luverne Grill Guard. Cooper S/T Maxx tires, DeeZee toolbox w/ Hi Lift Jack, two Jerry Cans/Mounts, Armacoating bedliner, Carli front diff guard. White Knuckle Off Road Sliders.

User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1061
Joined: Fri Oct 18, 2013 10:03 am
Location: Mesa, AZ

Re: FRONT LICENSE PLATE MOD

Post by SheepdogOutdoorsman » Sat Jun 28, 2014 9:52 pm

MOPARManiac wrote:
SheepdogOutdoorsman wrote:Another nail in the coffin for California! No front license plate required here in AZ ... Socialism vs Liberty!
That is a good idea, I do not like how far my plate hangs down as well.

I don't want to turn this in a political thread, but Socialism vs. Liberty because California requires a front plate? I would love to hear an explanation as it is a bit of a stretch. Arizona still requires vehicle registration, a drivers license, insurance just like California and every other state. Whether the state requires a front plate is a moot point.
The front license plate, among many other things, is just "another nail in the coffin" ... Don't get me wrong, California is a beautiful state with a lot of liberty minded individuals, but let's be honest ... It's unfortunately being brought down by socialistic ideals. Nevertheless, my comment was meant to be a quick poke. By no means do I want this to turn into a political discussion hijacking the thread. All in good fun ... every state has its issues! Arizona has its issues too, but I'll live in the red over the blue any day ... I grew up in Michigan ... I have some experience ... Just look at Detroit ... Case in point ... That's where all Blue states are heading unfortunately.
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...

User avatar
fbenross
500_Posts
500_Posts
Posts: 601
Joined: Thu May 24, 2012 8:35 pm
Location: Moss Beach CA

Re: FRONT LICENSE PLATE MOD

Post by fbenross » Sat Jun 28, 2014 10:07 pm

It doesn't bother me if the thread wanders-that's one of the reasons we deserted DodgeTalk...TOO many rules...I love the town I live in here in CA, but I sure hate the laws. And I keep my F. lic. plate on so the cops don't have an excuse to pull me over.
Ben CW3 2/10th AIR CAV FT ORD CA. (retired)
2006 Power Wagon-6spd, rear air bags, Diff Guards:Carli F. RockCrusher R., matching rim for spare tire, removed back seat for storage----I own the following: 2005 Hallmark pop-top Camper---1970 Scout 800 4x4 w/232ci 6cyl 4spd---2006 Yamaha XT225 Dual Sport---Pictures @ https://www.flickr.com/photos/powerwagon/collections

User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1061
Joined: Fri Oct 18, 2013 10:03 am
Location: Mesa, AZ

Re: FRONT LICENSE PLATE MOD

Post by SheepdogOutdoorsman » Sat Jun 28, 2014 10:20 pm

fbenross wrote:It doesn't bother me if the thread wanders-that's one of the reasons we deserted DodgeTalk...TOO many rules...I love the town I live in here in CA, but I sure hate the laws. And I keep my F. lic. plate on so the cops don't have an excuse to pull me over.
Yeah, growing up in Michigan watching liberals and unions destroy the state it sure left me with a sour taste. After moving to Arizona, experiencing "right to work", other such liberty minded ideals (gun rights included) and pursuing a degree in public administration, my eyes were opened to the true meaning of our constitution, the true role of government, and the difference between crony capitalism and true capitalism. I am kind of a mixed bag thought ... socially liberal, but economically and "role of government" conservative ... I guess I fit the mold of a libertarian ... rant over! Sorry guys ... No offense intended
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: FRONT LICENSE PLATE MOD

Post by Mr.Smith » Sat Jun 28, 2014 11:22 pm

Simple...well done Sir!

User avatar
autogateman
50_Posts
50_Posts
Posts: 183
Joined: Thu May 01, 2014 11:15 pm
Model Year: 2014
Location: Maurepas La

Re: FRONT LICENSE PLATE MOD

Post by autogateman » Sat Jun 28, 2014 11:35 pm

I bought a vintage farm truck plate for the front of mine.
ImageUploadedByTapatalk1404012932.516896.jpg

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: FRONT LICENSE PLATE MOD

Post by Mr.Smith » Sat Jun 28, 2014 11:38 pm

Hahahahaha! FU TRUCK...am I reading that clearly?

User avatar
autogateman
50_Posts
50_Posts
Posts: 183
Joined: Thu May 01, 2014 11:15 pm
Model Year: 2014
Location: Maurepas La

Re: FRONT LICENSE PLATE MOD

Post by autogateman » Sun Jun 29, 2014 12:51 am

Lol it stands for 'farm use'

User avatar
Stickman
500_Posts
500_Posts
Posts: 829
Joined: Mon Nov 18, 2013 12:02 am
Model Year: 2012
Location: Wayland, MO

Re: FRONT LICENSE PLATE MOD

Post by Stickman » Sun Jun 29, 2014 2:43 am

I run a Caterpillar novelty plate on the front of mine in MO, IA and IL. Haven't had an issue yet but it does state in the laws for all 3 states that you have to have one on front and rear at all times. I asked the local highway patrol and they said you are supposed to have both on but they normally don't make much of a fuss about it.
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187

User avatar
jeep_boy02
1000_Posts
1000_Posts
Posts: 1098
Joined: Sat Feb 16, 2013 1:21 pm

Re: FRONT LICENSE PLATE MOD

Post by jeep_boy02 » Sun Jun 29, 2014 10:24 am

I'm in Mo. And havent had a front plate on my jeep since about 2005. Don't want to drill holes in my bumper so I have front plate in my door pocket. Only been 3 weeks but haven't had any stops.
2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon

Prairidawg
Posts: 43
Joined: Tue Apr 16, 2013 10:41 pm

Re: FRONT LICENSE PLATE MOD

Post by Prairidawg » Sun Jun 29, 2014 12:50 pm

We haven't had to have a front plate for a few years in saskatchewan, it was always such a PITA, was happy when we could remove/not install them

User avatar
cruz
500_Posts
500_Posts
Posts: 998
Joined: Sat May 26, 2012 11:36 am
Location: Santa Cruz, CA

Re: FRONT LICENSE PLATE MOD

Post by cruz » Sun Jun 29, 2014 3:51 pm

I haven't had my plate on for almost 9 yrs , never did put it on from day one. I keep it in the pouch on the back of the passenger seat along with the 2 screws and a nut driver, in case I ever do get stopped. Never have been stopped. Just like Ducky's Dad, I'll say I just used the winch the other day and offer to put it back on right there.

Everybody thinks that California is some kind of socialist police state, to the contrary, when it comes motor vehicles you can get away with almost anything. We've got some of the loudest motorcycles and ridiculously modded trucks and cars clogging the highways along with a gazillion POS vehicles that should have been scrapped years ago. Other than a smog check every other year, there are no vehicle inspections what so ever.
2005 Power Wagon

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2173
Joined: Mon May 19, 2014 11:56 pm
Model Year: 2014
Location: Mid-Michigan, MI

Re: FRONT LICENSE PLATE MOD

Post by adeluca73 » Mon Jun 30, 2014 12:03 am

cruz wrote:I haven't had my plate on for almost 9 yrs , never did put it on from day one. I keep it in the pouch on the back of the passenger seat along with the 2 screws and a nut driver, in case I ever do get stopped. Never have been stopped. Just like Ducky's Dad, I'll say I just used the winch the other day and offer to put it back on right there.

Everybody thinks that California is some kind of socialist police state, to the contrary, when it comes motor vehicles you can get away with almost anything. We've got some of the loudest motorcycles and ridiculously modded trucks and cars clogging the highways along with a gazillion POS vehicles that should have been scrapped years ago. Other than a smog check every other year, there are no vehicle inspections what so ever.
Love Cali, been stationed there for 4 yrs, just couldn't ever live there again---I think that stigma comes a lot less from car regulations, and a lot more from: Gun laws, taxes, and rampant liberalism that defies logic and reason.
SOLD : 2014 Ram PW SLT: (Flame Red) 1st year of the Best Gen
<Build Thread>

NEW : 2025 Ram PW SLT: (Flame Red) Last year of the Best Gen
Initial Mods:
  • Yokohama Geolander A/T4 35/12.5R/17LT
  • Baja Squadron PRO Fog Light Kit
  • CJC Front Skid
  • Air Dam Delete
  • Carli Front Diff Cover
  • Purple Cranium Spider Rear Diff Cover
  • Detloff Rear Sway Bar Spacer kit
  • LED Bed Lighting Kit
  • RAM OEM Fr/Rear rubber Splash Guards
  • Bulletpoint RAM powered magsafe phone mount
  • Refurbished my old Diamondback HD
    - New linex
    - 42” tool bar & muti-clamps
    - DB’s Strip LEDs auto on/off kit
    - New style locking kit
    - New lock bar hardware kit
    - New style tie down cleats
  • Garmin BT Power Switch Powering:
    - Abel Electric Nanny KS
    - BD S2 Pro x2 (Rear)
    - KC Hi-lights LED puck lights in the engine bay
    - Patton Fab Rear Light Mounts
    - BD Squadron XL8100 Ditch Lights
    - SDHQ Ditch Light Mounts
PILFERED FROM MY ‘14 PW:
  • F-55 Flatlink
  • Diamondback HD
  • RAM OEM Sil Plates x4
  • Swing Cases x2
  • F-55 2.5” Rear Hitch Recovery Point
  • Rear Seat mounted 3x long gun case & storage pouches
  • Muddy waterproof rear seat blanket cover

User avatar
SheepdogOutdoorsman
1000_Posts
1000_Posts
Posts: 1061
Joined: Fri Oct 18, 2013 10:03 am
Location: Mesa, AZ

Re: FRONT LICENSE PLATE MOD

Post by SheepdogOutdoorsman » Mon Jun 30, 2014 12:42 am

^
Bravo! ... Couldn't have said it better
The Sheepdog Outdoorsman

2013 Power Wagon: Trail Ready Pre-Runner Guard Front Bumper, PIAA 540 6" Driving Lamps, PIAA 530 4" Fog Lamps, Warn 10" Roller Fairleads, In-Cab Relocation Of Winch Controller Port, & More To Come ...

User avatar
cruz
500_Posts
500_Posts
Posts: 998
Joined: Sat May 26, 2012 11:36 am
Location: Santa Cruz, CA

Re: FRONT LICENSE PLATE MOD

Post by cruz » Mon Jun 30, 2014 10:55 am

SheepdogOutdoorsman wrote:^
Bravo! ... Couldn't have said it better
^ ... I totally agree. I've been lucky enough to have lived here during CA's best times, San Jose in the '50s & '60s was agricultural before it became Silicon Valley. Santa Cruz used to be a small beach town before UCSC opened up on the hill that we call "commie central", and has now become a bedroom community to Silicon Valley. To be totally honest, if I couldn't live in Santa Cruz (with all it's faults) now, or up in the Sierras, I'd leave in a heartbeat.
2005 Power Wagon

2011RPW
250_Posts
250_Posts
Posts: 278
Joined: Thu Oct 24, 2013 9:22 pm
Model Year: 2011
Location: Harper, TX

Re: FRONT LICENSE PLATE MOD

Post by 2011RPW » Mon Jun 30, 2014 1:32 pm

Since Tx is strict on the front LP, when I put my aftermarket bumper on, I put a roller fair lead on it too, since it was quite a bit of distance from the winch to the bumper. I ordered a fair lead clip on kit for my front license plate. (It's basically mag lite clips.) it just snaps on the fair lead rollers, and when I need to use the winch, I just pop the LP off. Works well and is convenient.
2011
Thuren 3" Suspension, 37' Toyo R/T's, S&B, Flowmaster, Diablo Trinity, N-Fab steps (junk), 31" LED Light Bar, Replacement Bumpers, debadged.

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2173
Joined: Mon May 19, 2014 11:56 pm
Model Year: 2014
Location: Mid-Michigan, MI

Re: FRONT LICENSE PLATE MOD

Post by adeluca73 » Mon Jun 30, 2014 2:56 pm

Good idea!Ohio is strict on the front plate too. I was driving back from Michigan after deer hunting, and I snaged the plate in the woods trying to recover a deer in a ravine, and it got bent-up pretty good, so I unscrewed it and put it in the back seat. I forgot to reattch it on the way home, and got pulled over by a Statie about 5-10 miles south of the border just past Toledo. He let me go after I showed him the nice deer in back! :D
SOLD : 2014 Ram PW SLT: (Flame Red) 1st year of the Best Gen
<Build Thread>

NEW : 2025 Ram PW SLT: (Flame Red) Last year of the Best Gen
Initial Mods:
  • Yokohama Geolander A/T4 35/12.5R/17LT
  • Baja Squadron PRO Fog Light Kit
  • CJC Front Skid
  • Air Dam Delete
  • Carli Front Diff Cover
  • Purple Cranium Spider Rear Diff Cover
  • Detloff Rear Sway Bar Spacer kit
  • LED Bed Lighting Kit
  • RAM OEM Fr/Rear rubber Splash Guards
  • Bulletpoint RAM powered magsafe phone mount
  • Refurbished my old Diamondback HD
    - New linex
    - 42” tool bar & muti-clamps
    - DB’s Strip LEDs auto on/off kit
    - New style locking kit
    - New lock bar hardware kit
    - New style tie down cleats
  • Garmin BT Power Switch Powering:
    - Abel Electric Nanny KS
    - BD S2 Pro x2 (Rear)
    - KC Hi-lights LED puck lights in the engine bay
    - Patton Fab Rear Light Mounts
    - BD Squadron XL8100 Ditch Lights
    - SDHQ Ditch Light Mounts
PILFERED FROM MY ‘14 PW:
  • F-55 Flatlink
  • Diamondback HD
  • RAM OEM Sil Plates x4
  • Swing Cases x2
  • F-55 2.5” Rear Hitch Recovery Point
  • Rear Seat mounted 3x long gun case & storage pouches
  • Muddy waterproof rear seat blanket cover

User avatar
fbenross
500_Posts
500_Posts
Posts: 601
Joined: Thu May 24, 2012 8:35 pm
Location: Moss Beach CA

Re: FRONT LICENSE PLATE MOD

Post by fbenross » Mon Jun 30, 2014 8:07 pm

cruz wrote:
SheepdogOutdoorsman wrote:^
Bravo! ... Couldn't have said it better
^ ... I totally agree. I've been lucky enough to have lived here during CA's best times, San Jose in the '50s & '60s was agricultural before it became Silicon Valley. Santa Cruz used to be a small beach town before UCSC opened up on the hill that we call "commie central", and has now become a bedroom community to Silicon Valley. To be totally honest, if I couldn't live in Santa Cruz (with all it's faults) now, or up in the Sierras, I'd leave in a heartbeat.
My Grandpa had a farm in San Jose, and later in life moved to Aptos, where I spent many summers body surfing down by the cement boat...
Ben CW3 2/10th AIR CAV FT ORD CA. (retired)
2006 Power Wagon-6spd, rear air bags, Diff Guards:Carli F. RockCrusher R., matching rim for spare tire, removed back seat for storage----I own the following: 2005 Hallmark pop-top Camper---1970 Scout 800 4x4 w/232ci 6cyl 4spd---2006 Yamaha XT225 Dual Sport---Pictures @ https://www.flickr.com/photos/powerwagon/collections

Ducky's Dad
1000_Posts
1000_Posts
Posts: 1522
Joined: Thu May 24, 2012 10:55 pm

Re: FRONT LICENSE PLATE MOD

Post by Ducky's Dad » Mon Jun 30, 2014 10:40 pm

I spent many summers body surfing down by the cement boat...
When we were young and dumb, we used to body surf The Wedge in Newport. Can't do that in Texas or Ohio.

Wedge YouTube vid. Pussies now are riding body boards. When it's up, that break can dump you right onto the sand. In high school, one of the guys broke his hip there.

http://www.youtube.com/watch?v=OeL1KJepYps

http://www.youtube.com/watch?v=WoZuMiDQBWk

User avatar
MSCH2112
250_Posts
250_Posts
Posts: 369
Joined: Mon Sep 17, 2012 11:45 pm
Model Year: 2012
Location: Reno, NV

Re: FRONT LICENSE PLATE MOD

Post by MSCH2112 » Tue Jul 01, 2014 7:09 pm

i've lost 2 front license plates on the trail in the past 10 years. now we don't have to have a front plate so i'm done with that.

yeah, more Californians are moving to Nevada more than ever, including small and large companies. love northern cali though.

mike
2017 Ram 2500 Longhorn Cummins
295 60 R20 Nitto Ridge Graplers
Gooseneck
Pace Edwards elec.Metal Jacket bed cover
yeah and running boards for the wifey
Support Search and Rescue-GET LOST

SOLD 2012 Power Wagon Laramie
w/ 12k Warn winch, Nav, Sunroof, Leer Topper, AMP boards, Spray on-bedliner-rockers-flares

SOLD 2005 Power Wagon w/ 12k Warn winch, loaded incl. leather, rockrails, nav, sunroof, 9.5 ti Warn winch in the rear, Gibson Headers and catback, Pace-Edwards full metal elec. bed cover and elec. tailgate lock, PIAA driving lights behind grill

2009 Victory Jackpot Cory Ness Edition

2016 GMC Yukon Denali XL

2016 Volvo XC90

Ducky's Dad
1000_Posts
1000_Posts
Posts: 1522
Joined: Thu May 24, 2012 10:55 pm

Re: FRONT LICENSE PLATE MOD

Post by Ducky's Dad » Fri Aug 29, 2014 12:24 am

Bring back an old thread. The Wedge was up yesterday.

Image

Image

Image

Image

Image

Image

Image

Pics from the L.A. Times. This is one reason some of us are willing to put up with the California crap, at least for a while.

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2173
Joined: Mon May 19, 2014 11:56 pm
Model Year: 2014
Location: Mid-Michigan, MI

Re: FRONT LICENSE PLATE MOD

Post by adeluca73 » Fri Aug 29, 2014 1:42 am

GOOD NIGHT
SOLD : 2014 Ram PW SLT: (Flame Red) 1st year of the Best Gen
<Build Thread>

NEW : 2025 Ram PW SLT: (Flame Red) Last year of the Best Gen
Initial Mods:
  • Yokohama Geolander A/T4 35/12.5R/17LT
  • Baja Squadron PRO Fog Light Kit
  • CJC Front Skid
  • Air Dam Delete
  • Carli Front Diff Cover
  • Purple Cranium Spider Rear Diff Cover
  • Detloff Rear Sway Bar Spacer kit
  • LED Bed Lighting Kit
  • RAM OEM Fr/Rear rubber Splash Guards
  • Bulletpoint RAM powered magsafe phone mount
  • Refurbished my old Diamondback HD
    - New linex
    - 42” tool bar & muti-clamps
    - DB’s Strip LEDs auto on/off kit
    - New style locking kit
    - New lock bar hardware kit
    - New style tie down cleats
  • Garmin BT Power Switch Powering:
    - Abel Electric Nanny KS
    - BD S2 Pro x2 (Rear)
    - KC Hi-lights LED puck lights in the engine bay
    - Patton Fab Rear Light Mounts
    - BD Squadron XL8100 Ditch Lights
    - SDHQ Ditch Light Mounts
PILFERED FROM MY ‘14 PW:
  • F-55 Flatlink
  • Diamondback HD
  • RAM OEM Sil Plates x4
  • Swing Cases x2
  • F-55 2.5” Rear Hitch Recovery Point
  • Rear Seat mounted 3x long gun case & storage pouches
  • Muddy waterproof rear seat blanket cover

Post Reply