SimonandSimonBeast Build

Start your thread and show everyone your build out.
User avatar
Bill2014
1000_Posts
1000_Posts
Posts: 1540
Joined: Fri May 09, 2014 9:03 pm
Model Year: 2014
Location: Northern NY

Re: SimonandSimonBeast Build

Post by Bill2014 » Tue Oct 27, 2020 12:04 pm

Looks like a nice clean job! :cheers:
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch

Moab 2006

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Tue Oct 27, 2020 1:30 pm

Thanks. Definitely one of the more tedious jobs I've done. Need more elbows and smaller hands to do this job.

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sat Oct 31, 2020 3:34 pm

Just added a couple of 4" pipe couplers to add strength and help leak proof the 2 intake tube joints. I credit this idea to Justin. I highly recommend doing this as part of the install, not afterwards. I had to undo a bit of my work to sneak these couplers in.

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sat Oct 31, 2020 3:35 pm

Here are the picsImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Fri Dec 25, 2020 12:21 pm

Looky what ol' St. Nick brought for me...Image

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 3:35 pm

Installed the Abel Swaybar Bypass today. I have to say Dave makes job easy, and works perfectly. Here is the step-by-step. This may be redundant for some people, but might be helpful to others.

First step, disconnect wire harness from smart bar.ImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 3:38 pm

Next remove 3 bolts attaching smart bar housing and detach.ImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 3:41 pm

Next insert PVC spacer into housing still attached to the truck.ImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 3:49 pm

Drill small hole in smart bar module plastic webbing, insert E clip to groove in shaft, attach zip tie through hole and above E clip on shaft, retract shaft and tighten zip tie and affix rubber tip on shaft.ImageImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 3:56 pm

Affix dielectric grease on module gasket, affix clear plastic cover over module and press against grease.ImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 4:02 pm

Apply provided silicone sealant to new actuator motor and screw it to the aluminum adapter plate. I used slide channel pliers to snug it up carefully. Attach adapter plate to smart bar housing using provided bolts. I used a little blue locktite. Torque to 37 lbs once on truck.ImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 4:08 pm

Apply sealant to housing still attached to the truck. Press on smart bar module, affix OE bolts and torque all bolts to 37 lbs. Reattach factory harness and new override harness. Use dielectric grease on both harness clips.ImageImageImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 4:16 pm

Run override harness up toward fuse block (I ran mine down before attaching to the module...gravity helps). Drill hole in fuse block housing to run red wire into fuse block. Attach add-a-fuse wire provided. Remove proper fuse from block and insert it into empty slot on add-a-fuse connector. Seal spot where wire enters housing. Insert add-a-fuse in proper slot (#77 on my '13). Close housing. Run black ground wire to body ground bolt. Secure wire harness in engine bay with zip ties as needed.Image

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 4:19 pm

Drill hole in clutch plate cover large enough to route remaining wire harness through hole. Apply sealant once wire is routed through hole. Use zip ties as needed.Image

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Sun Dec 27, 2020 4:24 pm

I drilled and inserted the control button in the same small dash panel that I installed my KC aux light switches in. I connected the ground wire to the same bolt I attached my aux light switch ground wires under the dash. Secure extra wires with zip ties as needed. Done. ImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:


User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Thu Dec 31, 2020 8:51 am

Lol...yeah, I was kind of thinking it was redundant since your instructions are so good. It really was one of the easier mods I've done. Maybe if some people on the fence see it in my build, they will pull the trigger.

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Tue Feb 23, 2021 9:10 pm

I know this isn't a Power Wagon, but now I have a build 2.0. picked up this 2005 LJ for my 18 yr old son. Now it is the father and son build. I will have to decide between this and my wagon from a budgetary standpoint.ImageImageImageImageImage

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
Mule007
500_Posts
500_Posts
Posts: 685
Joined: Mon May 16, 2016 9:27 pm
Location: Colton, Oregon

Re: SimonandSimonBeast Build

Post by Mule007 » Tue Feb 23, 2021 11:13 pm

:popcorn: Nice looking rig to start your build!
:patriot:2005 Mineral Grey; QC- #0666: "Laramie", power heated Leather seats, tow mirrors, dual zones, Alpine 9 speaker surround sound, steering wheel cruise control, music & volume controls; remote start, 6 CD player, AC; dark charcoal silver interior.
Additions: Frame mounted .188 DOM 3" steel rock rails, low profile steps;1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR HD bed & rock panel coating; Red Ryder matching cab high fiberglass canopy; 2” Linex brush guard w/4-4” Halogen off road lights; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black fender flares; PW winch accessory kit/remote control.
Tools: hand tools, 60” Extreme High Lift; rigging; straps; shackles; F&R chains; (2ea) rear wheel well NATO 20 L narrow gas cans & 5# extinguishers
Updates: Jasper Remfgr’d 5.7 Hemi Engine; Open Range AT 35x12.5 x17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, y bar & bushing assemblies; fuel pump; A/C exhaust fan & compressor;1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180-amp alternator; Megatron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks/HD steering damper; F&R locker assembly & sensors/u joints; 3" Magna flow cat back rear exit dual exhausts; Performance Brake/slotted rotor/caliper/pads

RustyPW
2000_Posts
2000_Posts
Posts: 5430
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: SimonandSimonBeast Build

Post by RustyPW » Wed Feb 24, 2021 12:19 am

Nice way to start your son out. My neighbor redid 3 Jeeps for his 2 kids. The one got totaled. :roll:
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

User avatar
TommyG
250_Posts
250_Posts
Posts: 497
Joined: Sun Oct 05, 2014 2:41 pm
Model Year: 2012

Re: SimonandSimonBeast Build

Post by TommyG » Wed Feb 24, 2021 7:23 am

Great project. Enjoy the father son time!
2012 Power Wagon
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Wed Feb 24, 2021 11:58 am

I had a '97 TJ I bought new. Drove it for 11 years. Loved wrenching on that and wheeling it. I really liked the LJ idea when they came out. So capable when they get lifted while getting a little more usable interior space. I was lucky to find this nice specimen nearby.

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

User avatar
Mule007
500_Posts
500_Posts
Posts: 685
Joined: Mon May 16, 2016 9:27 pm
Location: Colton, Oregon

Re: SimonandSimonBeast Build

Post by Mule007 » Wed Feb 24, 2021 1:22 pm

May you & your son enjoy many good times w the rebuild & use 🍀🙏
:patriot:2005 Mineral Grey; QC- #0666: "Laramie", power heated Leather seats, tow mirrors, dual zones, Alpine 9 speaker surround sound, steering wheel cruise control, music & volume controls; remote start, 6 CD player, AC; dark charcoal silver interior.
Additions: Frame mounted .188 DOM 3" steel rock rails, low profile steps;1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR HD bed & rock panel coating; Red Ryder matching cab high fiberglass canopy; 2” Linex brush guard w/4-4” Halogen off road lights; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black fender flares; PW winch accessory kit/remote control.
Tools: hand tools, 60” Extreme High Lift; rigging; straps; shackles; F&R chains; (2ea) rear wheel well NATO 20 L narrow gas cans & 5# extinguishers
Updates: Jasper Remfgr’d 5.7 Hemi Engine; Open Range AT 35x12.5 x17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, y bar & bushing assemblies; fuel pump; A/C exhaust fan & compressor;1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180-amp alternator; Megatron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks/HD steering damper; F&R locker assembly & sensors/u joints; 3" Magna flow cat back rear exit dual exhausts; Performance Brake/slotted rotor/caliper/pads

User avatar
PWJouster
250_Posts
250_Posts
Posts: 466
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: SimonandSimonBeast Build

Post by PWJouster » Wed Feb 24, 2021 4:29 pm

your son just chose the best possible first vehicle.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 416
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: SimonandSimonBeast Build

Post by SimonandSimonBeast » Wed Feb 24, 2021 8:20 pm

Thanks guys. Looking forward to wrenching and wheeling with him. Already spent a few hundred on bringing the interior, which wasn't bad, up to date. Rough Country seat covers, Weathertech mats, Grabbars, bluetooth JVC marine spec stereo and Infinity speakers all around. Next mods will probably be sliders and diff guards, before we tackle lift, tires and driveline. Got to eliminate that slip yoke for sure. Any suggestions based on experience are welcome.

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

Post Reply