AAM ball joints.

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
Post Reply
ACL123
50_Posts
50_Posts
Posts: 56
Joined: Sun Mar 24, 2013 9:27 pm

AAM ball joints.

Post by ACL123 » Sat Aug 29, 2020 8:50 pm

Are these OE for our trucks? Any feedback on them would be appreciated.
2005 Bright Silver PW
2005 Mineral Grey PW
Top
RustyPW
2000_Posts
2000_Posts
Posts: 5539
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: AAM ball joints.

Post by RustyPW » Sat Aug 29, 2020 11:47 pm

I installed the Carli ball joints about 60,000 miles ago. And they are still tight.
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:
Top
User avatar
coder
1000_Posts
1000_Posts
Posts: 1346
Joined: Wed Jun 06, 2012 5:18 pm
Model Year: 2007
Location: Trabuco Canyon, CA

Re: AAM ball joints.

Post by coder » Fri Sep 04, 2020 12:06 am

I have Dynatrac ball joints in my truck. After about 140k miles I rebuilt them, tops were still tight bottoms were loose. For about $195 you can get the rebuild kit for all four ball joints and do the work without having to remove them from the axle, very pleased with this product.
Vehicle: 2007 Power Wagon Quad Cab - Factory Options (Inferno Red, Premium Cloth Bench Seat, Light Group, Automatic Transmission, Leather Steering Wheel)
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
Top
User avatar
Oilbrnr
50_Posts
50_Posts
Posts: 164
Joined: Tue May 02, 2017 7:26 pm
Model Year: 2016
Location: Flagstaff & Scottsdale, Arizona

Re: AAM ball joints.

Post by Oilbrnr » Fri Sep 04, 2020 4:54 pm

Where do EMF balljoints fall on the good, better, best rating of possible replacements?
'16 with '17 FWC
Top
SeppW
50_Posts
50_Posts
Posts: 102
Joined: Mon Jan 23, 2017 7:42 pm
Model Year: 2016
Location: Nothern Virginia

Re: AAM ball joints.

Post by SeppW » Fri Sep 04, 2020 10:01 pm

ACL123 wrote: ↑
Sat Aug 29, 2020 8:50 pm
 Are these OE for our trucks? Any feedback on them would be appreciated.
Unknown.
Last edited by SeppW on Sat Oct 17, 2020 9:56 pm, edited 2 times in total.
Top
ACL123
50_Posts
50_Posts
Posts: 56
Joined: Sun Mar 24, 2013 9:27 pm

Re: AAM ball joints.

Post by ACL123 » Wed Sep 09, 2020 8:54 pm

Out of stock everywhere. May have to goo Moog.
2005 Bright Silver PW
2005 Mineral Grey PW
Top
RustyPW
2000_Posts
2000_Posts
Posts: 5539
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: AAM ball joints.

Post by RustyPW » Wed Sep 09, 2020 10:44 pm

ACL123 wrote: ↑
Wed Sep 09, 2020 8:54 pm
 Out of stock everywhere. May have to goo Moog.
If they are splined. Stay away from them.
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:
Top
ACL123
50_Posts
50_Posts
Posts: 56
Joined: Sun Mar 24, 2013 9:27 pm

Re: AAM ball joints.

Post by ACL123 » Thu Oct 08, 2020 7:32 pm

Went with the AAM

https://www.dennysdriveshaft.com/p3269_ ... _2500.html
2005 Bright Silver PW
2005 Mineral Grey PW
Top
ACL123
50_Posts
50_Posts
Posts: 56
Joined: Sun Mar 24, 2013 9:27 pm

Re: AAM ball joints.

Post by ACL123 » Thu Oct 08, 2020 7:34 pm

Tried all weekend to get the hubs off with no luck. Took it to a local shop and it took them 3 days to get the hubs off. Them suckers were on there. Also put 2 new skf hubs on.
Last edited by ACL123 on Thu Oct 08, 2020 9:21 pm, edited 1 time in total.
2005 Bright Silver PW
2005 Mineral Grey PW
Top
RustyPW
2000_Posts
2000_Posts
Posts: 5539
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: AAM ball joints.

Post by RustyPW » Thu Oct 08, 2020 8:56 pm

When I replaced my ball joints. I had to use a 7" fiber cut off wheel and cut the studs on the ball joints because I couldn't remove the unit bearings. Once I got the steering knuckle out and on the ground. i used a sledge hammer to knock the unit bearings out. :roll:
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:
Top
jj141979
Posts: 2
Joined: Thu Jul 23, 2020 9:20 am
Model Year: 2010

Re: AAM ball joints.

Post by jj141979 » Fri Oct 09, 2020 9:53 am

ACL123 wrote: ↑
Thu Oct 08, 2020 7:32 pm
 Went with the AAM

https://www.dennysdriveshaft.com/p3269_ ... _2500.html
Are these factory ball joints?? $69 per side seems pretty cheap!
2010 PW, 295/70-17 Mastercraft Courser MXT, Borla Exhaust, K&N CAI, Ported Throttle Body, Everything Else all factory
Top
ACL123
50_Posts
50_Posts
Posts: 56
Joined: Sun Mar 24, 2013 9:27 pm

Re: AAM ball joints.

Post by ACL123 » Sat Oct 17, 2020 8:40 pm

jj141979 wrote: ↑
Fri Oct 09, 2020 9:53 am
ACL123 wrote: ↑
Thu Oct 08, 2020 7:32 pm
 Went with the AAM

https://www.dennysdriveshaft.com/p3269_ ... _2500.html
Are these factory ball joints?? $69 per side seems pretty cheap!
Not sure if our trucks come with these but its the same company who makes our axles.
2005 Bright Silver PW
2005 Mineral Grey PW
Top
RustyPW
2000_Posts
2000_Posts
Posts: 5539
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: AAM ball joints.

Post by RustyPW » Sat Oct 17, 2020 9:57 pm

jj141979 wrote: ↑
Fri Oct 09, 2020 9:53 am
ACL123 wrote: ↑
Thu Oct 08, 2020 7:32 pm
 Went with the AAM

https://www.dennysdriveshaft.com/p3269_ ... _2500.html
Are these factory ball joints?? $69 per side seems pretty cheap!
Why would you replace junk with the same junk?
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:
Top
Post Reply

Return to “Power Wagon Talk”