2012 Power Wagon Part Out - Everything must go!

Buy / Sell / Trade - Got something to get rid of, or are looking for something specific?
Post Reply
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Fri May 02, 2014 1:18 pm

Updated with what I have left. Prices also updated a bit.

Carli mild steel control arms. Didn't get a pic but in good condition. Recently greased. $600 shipped.

Randy Ellis Design light bar mount for 06+ HD Ram. $160.

LMI Midtube carbon fiber intake. Replaced rubber hose between throttle body and stock air box. Includes K&N drop in filter. $200.

Pioneer AVH-X5400BHS headunit with Bluetooth. Includes mounting kit, PAC wire harness, and PAC Steering wheel interface. Ready to drop in an 09-12 4th gen. Also includes pre-wired relay that allows full use without the parking brake set. $425.

Pioneer XM Radio module for Pioneer headunits with P-Bus. $75.

Alpine MRP-F300 4-Channel amp. Will come with Kicker 4-Channel interconnects. $120.

Diamond plate hydro-dipped dash panels for 40/20/40 seats. There are a couple small blemishes where the hydrodip film had air bubbles. Includes center stack and two A/C vents. $120 plus your stock parts. You cover shipping to me. I’d
need you to ship yours to me and I would swap out and send them back the next day.

1" D-Ring Shackle 8.5T WLL. $30.

Image
Last edited by myoung84 on Wed Jun 18, 2014 2:53 pm, edited 6 times in total.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
shaner82
50_Posts
50_Posts
Posts: 130
Joined: Tue Mar 04, 2014 9:49 am
Model Year: 2013
Location: Eastern Ontario, Canada

Re: 2012 Power Wagon Part Out - Everything must go!

Post by shaner82 » Fri May 02, 2014 1:30 pm

I'll take the bypass kit if it will work for a 2013.
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Fri May 02, 2014 1:33 pm

It sure will. Canada shipping is an extra $28 for this one.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
shaner82
50_Posts
50_Posts
Posts: 130
Joined: Tue Mar 04, 2014 9:49 am
Model Year: 2013
Location: Eastern Ontario, Canada

Re: 2012 Power Wagon Part Out - Everything must go!

Post by shaner82 » Fri May 02, 2014 2:27 pm

myoung84 wrote:It sure will. Canada shipping is an extra $28 for this one.
UPS, Fed-Ex or USPS?

I have a US shipping address so depending on who you ship with, I may give you my US address instead. UPS and Fed-Ex charge us Canadians enormous brokerage fees for importing anything
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Fri May 02, 2014 2:31 pm

I always use USPS to ship to Canada. Flat rate in US is $12 and Canada is $40. If I can ship to a US address, I'll ship it either USPS or FedEx.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Fri May 02, 2014 3:04 pm

Locker kit is spoken for.

Regarding some of the larger items, PayPal and Bill Me Later (A PayPal service) both offer 6 months no interest on large purchases. Just thought I'd throw that out there. ;)
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
stubiePW
500_Posts
500_Posts
Posts: 581
Joined: Mon Nov 12, 2012 7:45 pm

Re: 2012 Power Wagon Part Out - Everything must go!

Post by stubiePW » Fri May 02, 2014 8:46 pm

If no one has claimed the wireless remote i'll take it


Sent from my iPhone using Tapatalk
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Fri May 02, 2014 8:55 pm

Sounds good. I'll PM you my PayPal address this weekend. It'll be ready to ship out on Monday.

Sent from my Samsung Galaxy Note 3.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
jeep_boy02
1000_Posts
1000_Posts
Posts: 1098
Joined: Sat Feb 16, 2013 1:21 pm

Re: 2012 Power Wagon Part Out - Everything must go!

Post by jeep_boy02 » Sat May 03, 2014 12:50 am

I'll take the aux panel, cab lights and tree saver.

Can also send you my originals if you need.
Sent from my SAMSUNG-SGH-I547 using Tapatalk
2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Sat May 03, 2014 7:58 am

jeep_boy02 wrote:I'll take the aux panel, cab lights and tree saver.

Can also send you my originals if you need.
Sent from my SAMSUNG-SGH-I547 using Tapatalk
AUX panel is sold but I'll put you down for the other stuff. Thanks!

Sent from my Samsung Galaxy Note 3.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
BigRed2007
250_Posts
250_Posts
Posts: 298
Joined: Sun Jul 15, 2012 5:08 pm
Model Year: 2007
Location: Central Texas

Re: 2012 Power Wagon Part Out - Everything must go!

Post by BigRed2007 » Mon May 05, 2014 2:21 pm

I am interested in the throttle body. What would shipping be to 80906
Flame Red 07 PW - BIG RED
White Knuckle Offroad Rock Sliders, Volant Intake, LightForce 210 HID x2, HiLift Mounted on Tool Box, Locker Bypass, OBA - EXTREMAIRE Magnum, High Idle, 315/70/17 MTR/Ks, ARB Front Bumper, Synthetic Winch Rope, 3000 Watt Inverter, Carli Performance 2.0 Front end and rear shocks, DT PROFAB Steering brace and Steering Stabilizer,Carli Front Diff Gaurd, 12v Fridge Freezer, Dual Optima Yellow Tops, AirFlow Snorkle, Magnaflow Muffler and Y-Pipe, 2x50W Solar Panels, DOR Control Arms.

KE0BZG
WQUY939
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Mon May 05, 2014 2:53 pm

I've got a deal going on the throttle body. I'll let you know if it falls through.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
BigRed2007
250_Posts
250_Posts
Posts: 298
Joined: Sun Jul 15, 2012 5:08 pm
Model Year: 2007
Location: Central Texas

Re: 2012 Power Wagon Part Out - Everything must go!

Post by BigRed2007 » Mon May 05, 2014 3:00 pm

Ok
Flame Red 07 PW - BIG RED
White Knuckle Offroad Rock Sliders, Volant Intake, LightForce 210 HID x2, HiLift Mounted on Tool Box, Locker Bypass, OBA - EXTREMAIRE Magnum, High Idle, 315/70/17 MTR/Ks, ARB Front Bumper, Synthetic Winch Rope, 3000 Watt Inverter, Carli Performance 2.0 Front end and rear shocks, DT PROFAB Steering brace and Steering Stabilizer,Carli Front Diff Gaurd, 12v Fridge Freezer, Dual Optima Yellow Tops, AirFlow Snorkle, Magnaflow Muffler and Y-Pipe, 2x50W Solar Panels, DOR Control Arms.

KE0BZG
WQUY939
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Tue May 06, 2014 10:27 pm

Bump. I really need the Carli parts and lights sold. I can't move around my garage, Power Wagon parts everywhere! LOL
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
shaner82
50_Posts
50_Posts
Posts: 130
Joined: Tue Mar 04, 2014 9:49 am
Model Year: 2013
Location: Eastern Ontario, Canada

Re: 2012 Power Wagon Part Out - Everything must go!

Post by shaner82 » Wed May 07, 2014 8:03 pm

Just curious myoung, what part of the country are you in? I'm heading on a trip to the US in the very near future so depending on what hasn't sold, I wouldn't be against possibly picking a few things up from you. But of course that depends on what state you're in
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Wed May 07, 2014 8:38 pm

I'm in northeast Oklahoma. Is that close to your path?

Sent from my Samsung Galaxy Note 3.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Thu May 08, 2014 11:08 am

Bump! I am now splitting up the Carli parts if nobody wants a whole kit. I will do the whole kit for $3250 shipped.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: 2012 Power Wagon Part Out - Everything must go!

Post by Mr.Smith » Thu May 08, 2014 11:16 am

Are the 2.5 Pintop's stainless shafts?
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Thu May 08, 2014 11:56 am

No, standard shafts.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: 2012 Power Wagon Part Out - Everything must go!

Post by Mr.Smith » Thu May 08, 2014 2:42 pm

Proud owner of an ARB EZ-Deflator! Thank you again!
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Thu May 08, 2014 4:06 pm

:D

One of you guys needs to be the proud owner of some Carli parts! ;)
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
Cactus Red
Moderator
Moderator
Posts: 1862
Joined: Sun May 20, 2012 6:43 pm
Location: Chino Valley, AZ.

Re: 2012 Power Wagon Part Out - Everything must go!

Post by Cactus Red » Thu May 08, 2014 4:25 pm

Damn it...

Just spent a pile on a rifle, or I'd be all over the Carli coils and shocks.
I'm just along for the ride...
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Thu May 08, 2014 4:37 pm

What's another couple grand? LOL
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Mon May 12, 2014 10:51 am

Bump! I really need these parts gone guys! No reasonable offer refused!
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
Top
User avatar
08TwinStickPW
250_Posts
250_Posts
Posts: 274
Joined: Wed Aug 22, 2012 9:24 am
Model Year: 2008
Location: Ulster County, NY

Re: 2012 Power Wagon Part Out - Everything must go!

Post by 08TwinStickPW » Mon May 12, 2014 11:55 am

Hi,

Is this the steering brace you have for sale (might be an older design), I have some friends that may be interested.

http://www.dtprofab.com/DTP0202409-2009 ... p_335.html

They are asking $190+ shipping new, how flexible are you on the price shipped to 12528, highland NY?
08' Dodge RAM PowerWagon (Laramie, 6 Speed)
GO: Diablo tuned, AEM drop in, Magnaflow "Y" and 24" muffler (dumper over the axle)
Traction/Suspension:305-70-17 Toyo AT2's, DT Profab Steering Brace, Carli front diff guard.
See: Silver stars headlights, 9012 fogs, reprogrammed for fogs with high beams, (2)6" KC LED gravity in driving/spread behind the grill
Tunes:Pioneer AVH-X5800BHS w/stock infinity amp, Infinity ref. dash/reardoor speakers, kappa component front door, JL rear stealth box and JX500.1d.
Other: Dually marker light under the tailgate, 2013+ Red hemi badges, Bedtred bedliner and mopar rubber mat, Wheel well liners, rubber flaps, Bakflip MX4, W2W Mopar steps (bedlined black), weathertech front mats and rain deflectors.
Top
Post Reply

Return to “Classifieds & Want Ads”