2012 Power Wagon Part Out - Everything must go!

Buy / Sell / Trade - Got something to get rid of, or are looking for something specific?
User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Mon May 12, 2014 12:23 pm

I could do $165 shipped on the steering brace. Mine is an older design that's C-Channel not tubing. Here's a couple pics from when I installed it.

Image
Image
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
04Ram2500Hemi
2000_Posts
2000_Posts
Posts: 2212
Joined: Thu May 31, 2012 12:19 pm
Model Year: 2012
Location: Missoula, MT

Re: 2012 Power Wagon Part Out - Everything must go!

Post by 04Ram2500Hemi » Mon May 12, 2014 4:25 pm

I've been trying for a week to figure out where I'd put your light bar because I think it's cool, but I don't have a place for it on my truck with my LED's behind the grill. Looks like you'll just have to keep the truck since you can't sell the parts. Cancel the order on the new truck. :wink:
Gone but Never Forgotten
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Mon May 12, 2014 4:27 pm

LOL. Too late to cancel. The light bar is ready to bolt to your truck. Very easy! You won't need the lights behind the grille with this light bar. The headlights would look killer on your truck too!
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
04Ram2500Hemi
2000_Posts
2000_Posts
Posts: 2212
Joined: Thu May 31, 2012 12:19 pm
Model Year: 2012
Location: Missoula, MT

Re: 2012 Power Wagon Part Out - Everything must go!

Post by 04Ram2500Hemi » Mon May 12, 2014 4:35 pm

I currently have a mod list of Thuren Control Arms, AEV Wheels, and 35" tires going so I'm going to have to save my pennies. I'm even thinking AEV Bumper(s) and maybe the 37" tire setup they will have in the next couple months if I don't go with Thuren Arms. Throw in the fact that I'm trying to save for a Pontoon Boat and my "mod" money goes away in a hurry. I swear I need a second job for the toys I want.
Gone but Never Forgotten
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Mon May 12, 2014 4:39 pm

I definitely need a second "mod" job. LOL

My Carli arms also push the axle forward 1/2" for better clearance. They are also offset, but not as much as Thurens. With a lower offset wheel like the AEV, it wouldn't be an issue rubbing the control arm. ;)
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

slimstick
50_Posts
50_Posts
Posts: 62
Joined: Wed Apr 30, 2014 11:43 am
Model Year: 2010

Re: 2012 Power Wagon Part Out - Everything must go!

Post by slimstick » Mon May 12, 2014 5:34 pm

Selling the power boards and/or tuner? Didn't see it on the list but figured I'd ask.

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Mon May 12, 2014 5:45 pm

No sir, those are going on the new truck. ;)
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Tue May 13, 2014 6:08 pm

OK guys, need to clear things out. I'll sell the full Carli suspension package (Springs, shocks, track bar, control arms) for $3000 shipped (lower 48)! That's $700 off of new parts! I'll knock off another $100 if paid as gift from Paypal or money order.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
stubiePW
500_Posts
500_Posts
Posts: 581
Joined: Mon Nov 12, 2012 7:45 pm

Re: 2012 Power Wagon Part Out - Everything must go!

Post by stubiePW » Tue May 13, 2014 9:15 pm

Damn if I had $3k


Sent from my iPhone using Tapatalk

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Tue May 13, 2014 9:17 pm

PayPal bill me later... ;)

Sent from my Samsung Galaxy Note 3.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
stubiePW
500_Posts
500_Posts
Posts: 581
Joined: Mon Nov 12, 2012 7:45 pm

Re: 2012 Power Wagon Part Out - Everything must go!

Post by stubiePW » Wed May 14, 2014 12:01 pm

Do you do payment plans. Haha. J/k


Sent from my iPhone using Tapatalk

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Wed May 14, 2014 12:24 pm

I'll do half down today and the other half in 3-5 business days. LOL
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Wed May 14, 2014 12:35 pm

I worked on the front shocks last night to clean them up a little better. Since they are encased within the coils they are a little hard to keep clean when on the truck. A scotch brite pad took off most of the crap and then I shined them up with some polishing compound. They look a whole lot better than the first pic. Once they are installed this is all hidden anyways. The scratches on the reservoirs are from the clamps so that will be covered as well. I'll work on the rears this week as well, but they weren't nearly as dirty since they are exposed.

Image
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Wed May 14, 2014 4:42 pm

Let's stir up the pot even more! I'll include a 4th gen locker bypass for $100 to anyone that buys the whole Carli kit!
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: 2012 Power Wagon Part Out - Everything must go!

Post by Mr.Smith » Wed May 14, 2014 5:11 pm

:jawdrop: Someone jump on this!

slimstick
50_Posts
50_Posts
Posts: 62
Joined: Wed Apr 30, 2014 11:43 am
Model Year: 2010

Re: 2012 Power Wagon Part Out - Everything must go!

Post by slimstick » Wed May 14, 2014 5:39 pm

I'll be more than happy to purchase a bypass but don't have the funds at the moment for the carli system. What did you do with the factory parts after you put on the new suspension?

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Thu May 15, 2014 10:28 am

slimstick wrote:I'll be more than happy to purchase a bypass but don't have the funds at the moment for the carli system. What did you do with the factory parts after you put on the new suspension?
The factory parts are back on the truck.

I'll be ordering more parts for another run of bypass kits after I get the new truck so stayed tuned! :rockon:
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: 2012 Power Wagon Part Out - Everything must go!

Post by Mr.Smith » Thu May 15, 2014 5:15 pm

Any current pictures of the DTPRO FAB steering brace & what sector shaft size does it fit???

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Thu May 15, 2014 6:15 pm

BigMike wrote:Any current pictures of the DTPRO FAB steering brace & what sector shaft size does it fit???
I'll post some this evening.

Sent from my Samsung Galaxy Note 3.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Thu May 15, 2014 8:15 pm

Here's the DTP steering brace. Not sure what size the shaft is, whatever is on a 2012. The label on the box for the hardware says 08-11.

[attachment=-1]uploadfromtaptalk1400199195049.jpg[/attachment]

Sent from my Samsung Galaxy Note 3.
Attachments
uploadfromtaptalk1400199195049.jpg
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
FirerescuePW
1000_Posts
1000_Posts
Posts: 1661
Joined: Sun May 20, 2012 12:51 pm
Location: North Wales, PA

Re: 2012 Power Wagon Part Out - Everything must go!

Post by FirerescuePW » Thu May 15, 2014 8:27 pm

Just sent you a PM. I think. I don't see it in my Sent folder.

Sent from my SPH-L720 using Tapatalk
'05 Mineral Gray Power Wagon QC #1005

WINCH MOB PROUD!

SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Thu May 15, 2014 9:09 pm

Got it and replied!

Sent from my Samsung Galaxy Note 3.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
Stickman
500_Posts
500_Posts
Posts: 829
Joined: Mon Nov 18, 2013 12:02 am
Model Year: 2012
Location: Wayland, MO

Re: 2012 Power Wagon Part Out - Everything must go!

Post by Stickman » Sun May 18, 2014 5:20 pm

Got any close up pictures of your headlights and the dash trim pieces? Also I'm assuming the tail gate lock is just a little dusty but in like new condition besides that?
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Sun May 18, 2014 10:11 pm

Tailgate lock is sold. I'll post up some good pics of the lights and dash tomorrow.

Sent from my Samsung Galaxy Note 3.
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

User avatar
myoung84
Vendor
Vendor
Posts: 1475
Joined: Mon Jul 16, 2012 11:47 am

Re: 2012 Power Wagon Part Out - Everything must go!

Post by myoung84 » Mon May 19, 2014 4:18 pm

Here's some more light pics.

Still on Jeremy's workbench:

Image
Image
Image

On the truck:

Image
Image
Image
Image

After I removed them:

Image

Pics of the dash pieces.

Image
Image
Image
Image
Image
Image
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug

Post Reply