OEM rock rails are sold!

[Beafire]

Ok, I bought this 2005 Dodge PW and I have been climbing in and jumping out of this truck for the past three weeks and Now I have decided to make the leap to a set of Powerboards NX's . I have no idea what is a fair price for a set of stock rock bars would be, however I can tell you that they are in perfect condition, no scrapes, no rust, I mean perfect! I will post some photos in the morning. It's kind of hard to sell sometihing when you don't know what the going rate is. How about $650 or best offer? They will come with all the hardware that comes off the truck when I remove them.
Not sure if the link works or not but I found the instulation instructions on line
https://www.dropbox.com/sh/7qbc01sbd61o5xw/nu7RxbCIOc
Thanks Lee

[Cactus Red]

You're way too low. The last set sold for damn near double that.

Sent via gigawatt laser...

[CJ8Rockcrawler]

I think I spent $800 for mine last year which weren't in nearly as good of condition as you are describing. I was fine with the condition of mine since I was adding a step and repainting anyway.

[Beafire]

You're way too low. The last set sold for damn near double that.

Sent via gigawatt laser...

Thanks Cactus Jack, Iike I said I had no idea what the going price was.
Thanks to my new best friends here I will be wanting $900 for the set and all the hardware.
It's hard to take photos of something black inside my garage but here's one.

I will post more when I go out today in the sun light.
Here is one.

[Beafire]

I ordered my Powerboard Nx's so I am accepting offers on these rock rails.

[leo72987]

Hello there i'm new to the forum I have a 2005 Dodge Powerwagon Regular cab I purchased a few months back. I live in Massachusetts were are these rock sliders located I'm just curious how much shipping would be I know those things are freaking heavy haha.

[Cactus Red]

I purchased mine from a gentleman in Colorado and had them delivered via truck freight vs UPS or FeDEx. It really wasn't too bad - granted, that was back a few years, but it was pretty reasonable considering the weight - just over a hundred as I recall. I use DATS trucking.

[Beafire]

Hello there i'm new to the forum I have a 2005 Dodge Powerwagon Regular cab I purchased a few months back. I live in Massachusetts were are these rock sliders located I'm just curious how much shipping would be I know those things are freaking heavy haha.

I am not for sure they will fit a regular cab truck. I have a four door truck. Send me the measurements from behind the front wheel to in front of the rear wheel and we will se if they will fit before we get into tring to figure out price and shipping. Thanks Lee

[leo72987]

Hey Lee got your message just sent a response looking forward to hearing from you.

[Beafire]

Leo72987 has decided that his kids need Christmas presents.
If your interested than let me know and maybe we can work something out.
Lee

[Beafire]

I know now why the united auto workers make so much money. You got to be a genius to get the bolts and blot holders inside the boxed frame rails. No way to fish some of them out so if you buy these you will get some brand new bolts to go with them. To keep them loose bolts from rattling around I used some expanding foam inside the frame rails.

[azracer]

To keep them loose bolts from rattling around I used some expanding foam inside the frame rails.

That's not a good idea, it holds moisture like a sponge and will promote rot/rust. A guy here did it to his buggy on the inside of every panel and had to remove it all due to the extra weight as well as the rusting. I think he said it was over 200# in water trapped in the foam. All he really wanted was for it to be quieter but decided it was better to sandblast the panels and used bed liner to coat them at the exponentially higher cost.

Possibly you could spray it with undercoating or paint to seal it before it gets contaminated with moisture inside that foam.

[bandit 1]

Do you still have the rock rails for sale?

[Beafire]

Do you still have the rock rails for sale?

Yes, however they are going to be very expensive to ship.
I will sell them to the first person that pays me $650 by PayPal and will be willing to drive as far as Kansas city to the east, Wichita Ks to the south, York Nebraska to the north and Colorado west if your willing to wait until I am heading west to go Jeeping next summer. I have been thinking about going to the Power Wagon gathering at Moab if I head that way I would be more than willing to haul them with me.

[bandit 1]

Do you know if they will for on a 2010?

[Beafire]

The mounting directions I found on line are for a 2013 and everything looks the same. However I can not be positive.
https://www.dropbox.com/sh/7qbc01sbd61o5xw/nu7RxbCIOc

[bandit 1]

What year did they come off of?

[Beafire]

What year did they come off of?

2005 Dodge PW

[bandit 1]

Were you located I will be heading to CA from Mn wondering if your along the way?

[Beafire]

Were you located I will be heading to CA from Mn wondering if your along the way?

I live in Salina Kansas it is right on I-70 between Kansas City and Denver.
http://en.wikipedia.org/wiki/Salina,_Kansas
More info than a person needs about my home town. Lol

[Pit Slave]

Do you know if they will for on a 2010?

these will only fit a 3rd gen. Reg cab long box or a quad cab short box.

sent from my [insert random phone device] using Tap-a-doddle Pro! now for a small fee!

[Beafire]

Still have these and the price is now $500.00

[leo72987]

Still have these and the price is now $500.00

Hey there lol I spoke with you awhile ago about these and had to bail. I think you mentioned you had a family member you know were you could ship them to ct? or something like that? I will take them if you're still interested in shipping them. My email is masscastle123@aol.com I have the resources as we're out of christmas season. If the shipping is not to crazy I can def do it.

Let me know,

Dan

[Pit Slave]

If you're right off of rt70 I can pick them up for you on the way back from Moab to save on shipping if you want.

sent from my [insert random phone device] using Tap-a-doddle Pro! now for a small fee!

[leo72987]

If you're right off of rt70 I can pick them up for you on the way back from Moab to save on shipping if you want.

sent from my [insert random phone device] using Tap-a-doddle Pro! now for a small fee!

Hey there I live up in Massachusetts so that would be a good drive down to you probably a little over four hours. However depending on what it would cost to ship these babies I may take you up on your offer. I will keep you posted and thank you!!