Working on an Electric Sway Bar Bypass

Retired BLM Rig products
User avatar
Retired BLM Rig
1000_Posts
1000_Posts
Posts: 1116
Joined: Sun Jan 31, 2016 6:51 pm
Model Year: 2008
Location: State of Jefferson

Re: Working on an Electric Sway Bar Bypass

Post by Retired BLM Rig » Thu Dec 26, 2019 1:37 pm

SimonandSimonBeast wrote:
Thu Dec 26, 2019 7:45 am
There are 10 wires going in and out of that connector on my truck. What does that mean regarding the bypass possibilities?

Sent from my Moto Z (2) using Tapatalk
It means that your truck has the newer CAN-BUS system that won't allow the use of the factory dash switches to control the sway bar bypass.

It will work with a dedicated rocker switch that I provide with the system. Here's a picture of what the amber rocker switch looks like installed in the dash.

IMG_2732.JPG
If you don't want to drill a 20mm hole in your dash, I provide an under-dash mounting bezel, seen in the upper left corner of this image.

Image


The official thread for the Sway Bar Bypass

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 415
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: Working on an Electric Sway Bar Bypass

Post by SimonandSimonBeast » Thu Dec 26, 2019 3:10 pm

I guess it kinda sucks that Ram nannyfied it that far. Regarding drilling that panel on my dash, I have no fear. I already put 2 KC light switches there. It's pretty much the perfect little panel to put aux switches.

Sent from my Moto Z (2) using Tapatalk

:rockon: :chug:

Post Reply