Power but no start... again

Discussions including Electrical / Lighting & Accessories / Onboard Air
Post Reply
User avatar
jeep_boy02
1000_Posts
1000_Posts
Posts: 1049
Joined: Sat Feb 16, 2013 1:21 pm

Power but no start... again

Post by jeep_boy02 » Tue Nov 02, 2021 11:57 pm

So I got in the PW this morning and got no start. It's done this back in 14 but it was intermittent and never came back. Dealer couldn't recreate back then neither.

I've read about TIPM, BCM, WIN module, etc... does anyone know if I can test these systems with alfaobd?

I pulled starter hoping it was that but it's still kicking hard even with 134k on it. Fuses all good, battery good but I pulled it and charging it anyhow. All lights, accs, key fob, etc work but when turn to start nothing. No click, no buzz, nothing...

Sent from my SM-A015A using Tapatalk

2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon

User avatar
jeep_boy02
1000_Posts
1000_Posts
Posts: 1049
Joined: Sat Feb 16, 2013 1:21 pm

Re: Power but no start... again

Post by jeep_boy02 » Mon Nov 08, 2021 8:26 pm

Well it had to go to dealer. Alfa can read all WIN info but not program it unless I just wasn't looking hard enough in the right spot.

$1600 for new WIN module and TIPM

Sent from my SM-A015A using Tapatalk

2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon

User avatar
jeep_boy02
1000_Posts
1000_Posts
Posts: 1049
Joined: Sat Feb 16, 2013 1:21 pm

Re: Power but no start... again

Post by jeep_boy02 » Fri Jan 14, 2022 7:16 pm

Well I FINALLY just picked her up. 2 months and 3 TIPMs later... ugh.

Would think the dealership would double check all the settings too. My TPMS is different, auto start not activated... and worst of all.... they didn't even take the time to set the damn time. ARGH WTF!? I hate my local dealer

Sent from my SM-A015A using Tapatalk


2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon

flattire
250_Posts
250_Posts
Posts: 352
Joined: Fri Jun 08, 2012 1:22 pm

Re: Power but no start... again

Post by flattire » Sat Jan 15, 2022 9:32 am

What is WIN module?

Was thinking it might be related to key/ignition switch.

User avatar
jeep_boy02
1000_Posts
1000_Posts
Posts: 1049
Joined: Sat Feb 16, 2013 1:21 pm

Re: Power but no start... again

Post by jeep_boy02 » Sat Jan 15, 2022 9:34 am

Yes it is. Wireless Ignition Node.

It's the box behind dash that you fob fits into or where the push to start is.

Sent from my SM-A015A using Tapatalk

2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon

Post Reply