2013 PW Starter Kit

Post Reply
Power Wagon Texan
Posts: 2
Joined: Sat Mar 21, 2015 5:20 pm
Model Year: 2013

2013 PW Starter Kit

Post by Power Wagon Texan » Thu Jun 18, 2020 8:40 pm

I'm going a lil stir crazy trying to make decisions for my build. After getting stuck in the middle of no where with the family (winch works good) I'm ready to start upgrading.

The know: Functional PW upgrades to allow for 37s without breaking my bank but provides a starting point for future upgrades. I've literally lurked for 7 years thinking about this and now it's here I'm having a bit of anxiety.

The how: no clue 😅, can't even decide on tires. I'm wanting to use AEV rims as a starting point. I'm not afraid of trimming, but I'll hit a shop for that because ain't no way I'm gonna cut sheet metal on my girl.
IMG_20200607_175713.jpg
Stock 2013 PW
Top
KevinABQ
250_Posts
250_Posts
Posts: 307
Joined: Thu Oct 19, 2017 4:32 pm
Model Year: 2018
Location: Albuquerque

Re: 2013 PW Starter Kit

Post by KevinABQ » Sun Jun 21, 2020 8:37 pm

Toyo MTs are never a bad option.

On 14s and later you can run them with stock wheels, though they will rub against the suspension at full lock.
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.
Top
User avatar
TommyG
250_Posts
250_Posts
Posts: 497
Joined: Sun Oct 05, 2014 2:41 pm
Model Year: 2012

Re: 2013 PW Starter Kit

Post by TommyG » Mon Jun 22, 2020 9:19 am

I am running Thuren Control Arms and a Thuren track bar on my 2012. No other suspension mods (yet). I have 37x12.50x17 Toyo RTs on the OEM wheels with that setup. They rub the rear of the fender well a little which is fixed with trimming. They also rub the sway bar or control arm at full lock with the stock wheels. The additional offset from the AEV wheels will help out with that. You can run that setup with no other mods and it will do amazing things for you. It is also a good first step for other suspension mods later. Still saving pennies for Thuren Springs, Shackles and King Shocks for mine. Some day...


PWOBX.jpg
2012 Power Wagon
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels
Top
13powerwagon
50_Posts
50_Posts
Posts: 87
Joined: Thu Oct 17, 2013 4:58 pm
Model Year: 2013

Re: 2013 PW Starter Kit

Post by 13powerwagon » Tue Jun 23, 2020 7:58 pm

I have a 13 as well. Im on 2” coils with Thuren short arms and track bar, have AEV wheels as well. With 37” toyo rts I had rubbing on the sway bar and the rear plastic fender. Did lots of plastic trimming. There is a wiring harness on the drivers side that the tire gets really close to. Rear is a bigger issue. With the AEV wheels, the tire ripped the fender flare off and damaged the bed under flex. Switched to 35s because of it. I now have Thuren LT leafs to push the axle back to help with bed contact. Im putting 37” hankook dynapro mts on stock wheels this week. Another member on here had good luck with that setup with minimal trimming so im hoping to have the same results.
2013 tradesman
Thuren 2” coils, track bar, short arms, 2.5 Kings, axle truss, LT leafs, shackles and front bumper. Carli ball joints, 37” dynapro mts on stock wheels, purple cranium dif covers, maple offroad skid, offset rear cross bar, sliders and high clearance rear bumper.
Top
Post Reply

Return to “Suspension & Lifts”