Smart Bar bolts
-
Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Smart Bar bolts
Does anyone know where I can buy, or the part number for, the three bolts that hold the electronic actuator module to the bar? After three years mine have disappeared and I need another set.
-
Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: Smart Bar bolts
I don't know the stock part number. The stock bolts have a retained loose flat washer, but I haven't had any success finding those in a bulk supply. I do have these. They're grade 10.9 M10 X 1.5 X 30mm black phosphate with a flat flanged 15mm hex head. Let me know if you want them.
- M10x1.5x30.png (15.22 KiB) Viewed 2782 times
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
-
Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: Smart Bar bolts
The factory part number is 68044409AA.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
-
Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Smart Bar bolts
Thanks. I'm going to try to source them locally first. I have one of the bolts and will be able to make it work short term.Retired BLM Rig wrote: ↑Mon Jun 15, 2020 11:17 pmI don't know the stock part number. The stock bolts have a retained loose flat washer, but I haven't had any success finding those in a bulk supply. I do have these. They're grade 10.9 M10 X 1.5 X 30mm black phosphate with a flat flanged 15mm hex head. Let me know if you want them.
IMG_2974.JPG
M10x1.5x30.png