BDS 2” lift and 37” tires on 2020 PowerWagon

Post Reply
39Saint
Posts: 1
Joined: Wed Apr 14, 2021 3:59 pm
Model Year: 2018

BDS 2” lift and 37” tires on 2020 PowerWagon

Post by 39Saint » Sun Feb 16, 2025 1:58 pm

:excited: I just had the BDS 2” Suspension lift installed and my 37” Yokohama Geolandar tires barely brush the bottom of the fender well plastic on full turn… is there a body weld under that cover that I can trim? Still snowing here in PA so I don’t have an opportunity to take that off and look.
Attachments
IMG_7385.jpeg
Top
User avatar
TommyG
500_Posts
500_Posts
Posts: 505
Joined: Sun Oct 05, 2014 2:41 pm
Model Year: 2012

Re: BDS 2” lift and 37” tires on 2020 PowerWagon

Post by TommyG » Sun Feb 16, 2025 7:58 pm

Good video on trimming everything. You can hit the pinch weld with a grinder/flap wheel if you are still making contact.

https://www.youtube.com/watch?v=ZrbWcMZKmxk
2012 Power Wagon - SOLD
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels

2021 75th Anniversary Edition
37.12.50 Toyo Open Country RT, Method Race Wheels, Rig'd Ultraswing Mega Fit, Thuren Rear Track Bar, Nanny Kill Switch, Switch Pros 9100, Amp Power Steps
Top
User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2165
Joined: Mon May 19, 2014 11:56 pm
Model Year: 2014
Location: Mid-Michigan, MI

Re: BDS 2” lift and 37” tires on 2020 PowerWagon

Post by adeluca73 » Wed Feb 19, 2025 12:21 am

39Saint wrote: ↑
Sun Feb 16, 2025 1:58 pm
 :excited: I just had the BDS 2” Suspension lift installed and my 37” Yokohama Geolandar tires barely brush the bottom of the fender well plastic on full turn… is there a body weld under that cover that I can trim? Still snowing here in PA so I don’t have an opportunity to take that off and look.
I ran 37’s on my 2014. Before & after installing the full Thuren suspension system. I had very minor rubbing @ full-lock before , none after.
SOLD : 2014 Ram PW SLT: (Flame Red) 1st year of the Best Gen
<Build Thread>

NEW : 2025 Ram PW SLT: (Flame Red) Last year of the Best Gen
Initial Mods:
  • Yokohama Geolander A/T4 35/12.5R/17LT
  • Baja Squadron PRO Fog Light Kit
  • CJC Front Skid
  • Air Dam Delete
  • Carli Front Diff Cover
  • LED Bed Lighting Kit
  • RAM OEM Fr/Rear rubber Splash Guards
  • Bulletpoint RAM powered magsafe phone mount
  • Refurbished my old Diamondback HD
    - New linex
    - 42” tool bar & muti-clamps
    - Strip LEDs
    - New style locking kit
    - New lock bar hardware kit
    - New style tie down cleats
  • Garmin Power Switch Powering:
    - Abel Electric Nanny KS
    - BD S2 Pro x2 (Rear)
    - Patton Fab Rear Light Mounts
    - BD Squadron XL8100 Ditch Lights
    - SDHQ Ditch Light Mounts
PILFERED FROM MY ‘14 PW:
  • F-55 Flatlink
  • Diamondback HD
  • RAM OEM Sil Plates x4
  • Swing Cases x2
  • F-55 2.5” Rear Hitch Recovery Point
  • Rear Seat mounted 3x long gun case & storage pouches
  • Muddy waterproof rear seat blanket cover
Top
KevinABQ
250_Posts
250_Posts
Posts: 310
Joined: Thu Oct 19, 2017 4:32 pm
Model Year: 2018
Location: Albuquerque

Re: BDS 2” lift and 37” tires on 2020 PowerWagon

Post by KevinABQ » Tue Apr 08, 2025 2:38 am

I put AEV wheel with the right offset in and didn’t have to trim anything.
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.
Top
Post Reply

Return to “Suspension & Lifts”