
Power Wagon Picture Thread
-
- 2000_Posts
- Posts: 5163
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Power Wagon Picture Thread
Found a couple of pic's on my phone from Rausch Creek this year. 

PWOC #53
2008 POWER WAGON RC
My build thread. viewtopic.php?f=13&t=2826
Moab '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '19 AOAA,
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. viewtopic.php?f=13&t=2826


Moab '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '19 AOAA,
Russ
NRA - Benefactor, Golden Eagle.

Re: Power Wagon Picture Thread
Nice pics, & truck Rusty !




Additions: Frame mounted .188 DOM 3" steel rock rails w/ low profile steps; 1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR black armor HD bed & rock panel coating; Matching Red Ryder cab high fiberglass canopy; 2” Linex brush guard w/ 4-4” KC Rally 400 Series Halogen off road lights; American Thunder cat back dual rear exhaust; Remote start; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black accent fender flares; PW winch kit & remote control;
Tools: 60” Extreme High Lift, straps, shackles, F&R chains, cables, off road rigging, 1 H2O & 2 rear wheel well NATO 20 L narrow gas cans.
Updates: Jasper Remfgr’d 5.7 Hemi Engine, Open Range AT 35 x 12.5 x 17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, & y bar assmblies, fuel pump; A/C exhaust fan & compressor, 1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180 amp alternator; Mega-tron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks & HD steering damper; F&R differential locking assemblies & front drive u joints
-
- 2000_Posts
- Posts: 5163
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Power Wagon Picture Thread
Thanks. As you can see. I abuse...........I mean use it.

If you look on the front bumper. You can see the water line.

PWOC #53
2008 POWER WAGON RC
My build thread. viewtopic.php?f=13&t=2826
Moab '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '19 AOAA,
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. viewtopic.php?f=13&t=2826


Moab '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '19 AOAA,
Russ
NRA - Benefactor, Golden Eagle.

Re: Power Wagon Picture Thread
Yeah, saw that as I was wondering if you ever needed your snorkel 


Additions: Frame mounted .188 DOM 3" steel rock rails w/ low profile steps; 1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR black armor HD bed & rock panel coating; Matching Red Ryder cab high fiberglass canopy; 2” Linex brush guard w/ 4-4” KC Rally 400 Series Halogen off road lights; American Thunder cat back dual rear exhaust; Remote start; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black accent fender flares; PW winch kit & remote control;
Tools: 60” Extreme High Lift, straps, shackles, F&R chains, cables, off road rigging, 1 H2O & 2 rear wheel well NATO 20 L narrow gas cans.
Updates: Jasper Remfgr’d 5.7 Hemi Engine, Open Range AT 35 x 12.5 x 17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, & y bar assmblies, fuel pump; A/C exhaust fan & compressor, 1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180 amp alternator; Mega-tron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks & HD steering damper; F&R differential locking assemblies & front drive u joints
-
- 2000_Posts
- Posts: 5163
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Power Wagon Picture Thread
Crossing a creek one time. I fell in a hole that wasn't there before. Had water on the hood.

PWOC #53
2008 POWER WAGON RC
My build thread. viewtopic.php?f=13&t=2826
Moab '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '19 AOAA,
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. viewtopic.php?f=13&t=2826


Moab '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '19 AOAA,
Russ
NRA - Benefactor, Golden Eagle.

Re: Power Wagon Picture Thread
Quick run to Home Depot for some sheet metal screws tonight, then set up the ramp and light to work on the tailgate...

Cut and installed Caliber Low-Profile Grip Glides on the tailgate.

That's enough for tonight. Wide glides going in the bed tomorrow night.


Cut and installed Caliber Low-Profile Grip Glides on the tailgate.

That's enough for tonight. Wide glides going in the bed tomorrow night.

Re: Power Wagon Picture Thread
Looks good! 


Additions: Frame mounted .188 DOM 3" steel rock rails w/ low profile steps; 1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR black armor HD bed & rock panel coating; Matching Red Ryder cab high fiberglass canopy; 2” Linex brush guard w/ 4-4” KC Rally 400 Series Halogen off road lights; American Thunder cat back dual rear exhaust; Remote start; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black accent fender flares; PW winch kit & remote control;
Tools: 60” Extreme High Lift, straps, shackles, F&R chains, cables, off road rigging, 1 H2O & 2 rear wheel well NATO 20 L narrow gas cans.
Updates: Jasper Remfgr’d 5.7 Hemi Engine, Open Range AT 35 x 12.5 x 17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, & y bar assmblies, fuel pump; A/C exhaust fan & compressor, 1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180 amp alternator; Mega-tron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks & HD steering damper; F&R differential locking assemblies & front drive u joints
Re: Power Wagon Picture Thread
Should prolong the life of the shitty herculiner in there.
I'm really not impressed with the stuff - save yourself the hassle/headache/time/mess and just have line-x shoot it.
Live and learn.
I'm really not impressed with the stuff - save yourself the hassle/headache/time/mess and just have line-x shoot it.
Live and learn.

Re: Power Wagon Picture Thread
I got another antenna

also $4.499/gal for 91E0
place I used to go to no longer sells fuel. Another place still kinda-local is ... expensive. 


also $4.499/gal for 91E0


Re: Power Wagon Picture Thread
We had the Linex Platinum Bed liner sraye put in when we got our truck, but don,t haul the quads or a snow mobile in it so has held up well. Yikes on the fuel! But looks like the snow is near so Enjoy!

Additions: Frame mounted .188 DOM 3" steel rock rails w/ low profile steps; 1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR black armor HD bed & rock panel coating; Matching Red Ryder cab high fiberglass canopy; 2” Linex brush guard w/ 4-4” KC Rally 400 Series Halogen off road lights; American Thunder cat back dual rear exhaust; Remote start; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black accent fender flares; PW winch kit & remote control;
Tools: 60” Extreme High Lift, straps, shackles, F&R chains, cables, off road rigging, 1 H2O & 2 rear wheel well NATO 20 L narrow gas cans.
Updates: Jasper Remfgr’d 5.7 Hemi Engine, Open Range AT 35 x 12.5 x 17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, & y bar assmblies, fuel pump; A/C exhaust fan & compressor, 1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180 amp alternator; Mega-tron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks & HD steering damper; F&R differential locking assemblies & front drive u joints
- Low_Sky
- 500_Posts
- Posts: 957
- Joined: Fri May 01, 2015 7:12 pm
- Model Year: 2015
- Location: Eagle River, Alaska
Re: Power Wagon Picture Thread



Sent from my iPhone using Tapatalk
- olyelr
- 2000_Posts
- Posts: 3656
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: Power Wagon Picture Thread
Did the ice push it off the bead?
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM


- Low_Sky
- 500_Posts
- Posts: 957
- Joined: Fri May 01, 2015 7:12 pm
- Model Year: 2015
- Location: Eagle River, Alaska
Re: Power Wagon Picture Thread
Wheel turned to the right, trying to climb the ice shelf, sliding along and ramming into the end of the shelf.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Bill2014
- 1000_Posts
- Posts: 1480
- Joined: Fri May 09, 2014 9:03 pm
- Model Year: 2014
- Location: Northern NY
Re: Power Wagon Picture Thread
How low was your tire pressure?
There's always a trade-off between traction and keeping the bead seated

2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
- Low_Sky
- 500_Posts
- Posts: 957
- Joined: Fri May 01, 2015 7:12 pm
- Model Year: 2015
- Location: Eagle River, Alaska
Re: Power Wagon Picture Thread
20 psiBill2014 wrote:How low was your tire pressure?
There's always a trade-off between traction and keeping the bead seated
Sent from my iPhone using Tapatalk
- Low_Sky
- 500_Posts
- Posts: 957
- Joined: Fri May 01, 2015 7:12 pm
- Model Year: 2015
- Location: Eagle River, Alaska
Power Wagon Picture Thread
And I’m “ain’t skeered” about losing a bead. First time I’ve done it on this truck, but that’s why I carry full tire repair tools on the trail.
Reseated it and drove it the rest of the way off the trail. Had to put the spare on when I got back to the highway. Was getting out of balance from the ~gallon of water and sand inside it.
Cleaned it out yesterday and we’re back to 100%. I even learned that TPMS sensors are submersible, at least for a little while. This one was dunked for as long as it took me to pull cable and winch out, and when I put the wheel back on the truck and drove it around the neighborhood it came back to life.
Sent from my iPhone using Tapatalk
Reseated it and drove it the rest of the way off the trail. Had to put the spare on when I got back to the highway. Was getting out of balance from the ~gallon of water and sand inside it.
Cleaned it out yesterday and we’re back to 100%. I even learned that TPMS sensors are submersible, at least for a little while. This one was dunked for as long as it took me to pull cable and winch out, and when I put the wheel back on the truck and drove it around the neighborhood it came back to life.
Sent from my iPhone using Tapatalk
Re: Power Wagon Picture Thread
Very cool! Always love your pics low sky.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: Power Wagon Picture Thread
Snow day!
Sent from my SM-G955U using Tapatalk

Sent from my SM-G955U using Tapatalk
2016 Granite Crystal Metallic Power Wagon Laramie, graphics delete, debadged, Thuren front and rear coils, Thuren rear swaybar links, Thuren front and rear trackbars, Traxada rear 1 inch spacers, King 3.0 (Stage 4) front and 2.5 (Stage 3) rear shocks, Boogie front bump stops, Cooper STT Pro 37x13.50R17 on XD Machette 17x9 +18 wheels, Centramatics, 5.13 gears, DOR steering brace, Thuren truss, Thuren King Steering Damper, Synergy Steering Kit, Thuren PW bumper, Thuren rear bumper, White Knuckle rock sliders, Dethloff skid plate, Dethloff rear sway bar spacers, Purple Cranium Half Spider front and rear diff guards, Airlift 5000 Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, Factor55 Ultrahook with 100ft 7/16 A.R.E. Spidersilk synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Rigid Side Shooter ditch lights, KC rock lights, Rigid fog lights, Baja Designs rear lights, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.
Re: Power Wagon Picture Thread
WOW. That’s beautiful
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: Power Wagon Picture Thread
Snow week?
Just about packed, got most of the course work gone through. Heading north for a week of snow dork training.
First load-up with the new glides installed in the bed.

Wide-Glides are just the right length, from back edge of the bed to the front of the carbide when the sled's in the bed.

Track and ramp catches on the tailgate glides when I slide the sled over to shove the ramp under it. Otherwise i'm happy with this so far.


Just about packed, got most of the course work gone through. Heading north for a week of snow dork training.
First load-up with the new glides installed in the bed.

Wide-Glides are just the right length, from back edge of the bed to the front of the carbide when the sled's in the bed.


Track and ramp catches on the tailgate glides when I slide the sled over to shove the ramp under it. Otherwise i'm happy with this so far.

- Bill2014
- 1000_Posts
- Posts: 1480
- Joined: Fri May 09, 2014 9:03 pm
- Model Year: 2014
- Location: Northern NY
Re: Power Wagon Picture Thread
A longer bed might really help your cause 

2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Re: Power Wagon Picture Thread
Short-bed's good enough.


Just me, for a week.






Just me, for a week.


Re: Power Wagon Picture Thread
New radiator. Had some issues overheating on long pulls with a trailer, that with the same trailer didn't used to overheat the truck.
Also had a coolant smell in the cab... Thought it was a leaking heater core, shop said leaking and inefficient radiator.
They also serviced t-case (fluid was dark), replaced rear diff seal (again, apparently it was leaking), and the gas struts on the hood.

Hopefully good for the season ... because I need a new track on my sled.

Also had a coolant smell in the cab... Thought it was a leaking heater core, shop said leaking and inefficient radiator.
They also serviced t-case (fluid was dark), replaced rear diff seal (again, apparently it was leaking), and the gas struts on the hood.

Hopefully good for the season ... because I need a new track on my sled.


Re: Power Wagon Picture Thread
Wheels on. Thuren Bumper is next. (Already in the garage).
Sent from my SM-G955U using Tapatalk

Sent from my SM-G955U using Tapatalk
2016 Granite Crystal Metallic Power Wagon Laramie, graphics delete, debadged, Thuren front and rear coils, Thuren rear swaybar links, Thuren front and rear trackbars, Traxada rear 1 inch spacers, King 3.0 (Stage 4) front and 2.5 (Stage 3) rear shocks, Boogie front bump stops, Cooper STT Pro 37x13.50R17 on XD Machette 17x9 +18 wheels, Centramatics, 5.13 gears, DOR steering brace, Thuren truss, Thuren King Steering Damper, Synergy Steering Kit, Thuren PW bumper, Thuren rear bumper, White Knuckle rock sliders, Dethloff skid plate, Dethloff rear sway bar spacers, Purple Cranium Half Spider front and rear diff guards, Airlift 5000 Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, Factor55 Ultrahook with 100ft 7/16 A.R.E. Spidersilk synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Rigid Side Shooter ditch lights, KC rock lights, Rigid fog lights, Baja Designs rear lights, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.