Diablosport tuner

Post Reply
User avatar
PWJouster
250_Posts
250_Posts
Posts: 466
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Diablosport tuner

Post by PWJouster » Fri Dec 28, 2018 11:26 am

who has replaced the PCM and tuned with DIablo?

looking for any support or information as the 6.4 would be a beast to tune out the factory reliability formula.

anyone with a 2018 thinking or has already installed a PCM and TUNE?

dying for transmission tunes, and would love to unleash the beast.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander

GMcPherson
Posts: 5
Joined: Mon Aug 06, 2018 7:59 pm
Model Year: 2018

Re: Diablosport tuner

Post by GMcPherson » Fri Dec 28, 2018 7:43 pm

I replaced my PCM on my 2016 2500. Used the Trinity T 1000. Ran the standard tune for awhile. It was 87 Octane tune. Noticeable difference. Bought a Custom Tune from HemiFever. Big difference and Shift points were a bit better also. Had the MDS Blocked which was very nice . I ran his 87 + Octane Tune. Just recently traded in my Truck for the 2500 Cummins.

User avatar
Bigdodge
Posts: 44
Joined: Wed Nov 22, 2017 1:18 pm

Re: Diablosport tuner

Post by Bigdodge » Sat Dec 29, 2018 11:14 pm

Love my new. Hemifever tune. Can't remember what it was like before as I bought it and yad it turned in a week or 2. Totally worth the drivability gains though

Sent from my Pixel 2 XL using Tapatalk


User avatar
PWJouster
250_Posts
250_Posts
Posts: 466
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: Diablosport tuner

Post by PWJouster » Wed Jan 02, 2019 10:39 am

i called hemifever and it was mentioned no support for 2018?
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander

StefanB
Posts: 21
Joined: Mon Nov 06, 2017 12:22 pm
Model Year: 2017
Location: Middle of Germany

Re: Diablosport tuner

Post by StefanB » Fri Jan 11, 2019 2:58 am

Diablosport just recently announced that their unlocked ECM's now also work for the '17 and '18 6.4L's. So Hemifever should now also be able to offer his tunes for the newer years with or without the diablosport tuner packages. At least that's what he stated in an email a while back when I asked.

As I'm across the pond, I'm kinda waiting for others to take the dive first and confirm.

NickTF
250_Posts
250_Posts
Posts: 489
Joined: Thu Feb 11, 2016 1:01 pm
Model Year: 2014

Re: Diablosport tuner

Post by NickTF » Thu Jan 17, 2019 9:16 am

Has anyone noticed less/complete reduction in part throttle surging after installation? I've ruled out the standard culprits and am wondering if my part throttle surging is due to the free-er flowing exhaust i've had on the truck.

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3658
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Diablosport tuner

Post by olyelr » Thu Jan 17, 2019 10:08 am

NickTF wrote:
Thu Jan 17, 2019 9:16 am
Has anyone noticed less/complete reduction in part throttle surging after installation? I've ruled out the standard culprits and am wondering if my part throttle surging is due to the free-er flowing exhaust i've had on the truck.
My truck still has it at 25k miles. Pretty much always has. I still have factory exhaust, and have not done anything to try to remedy it yet. Sure pisses me off tho!!!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

NickTF
250_Posts
250_Posts
Posts: 489
Joined: Thu Feb 11, 2016 1:01 pm
Model Year: 2014

Re: Diablosport tuner

Post by NickTF » Thu Jan 17, 2019 8:05 pm

I couldn’t remember if my truck did it with stock exhaust or not. Prob did I just don’t remember.

User avatar
PWJouster
250_Posts
250_Posts
Posts: 466
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: Diablosport tuner

Post by PWJouster » Fri Jan 18, 2019 8:47 am

any surging or funky driving characteristics i blame on the transmission.

any transmission tuning available, im going for it.

im entirely confident this 6.4 hemi has the bottom end to handle, and capacity to crank out substantially more power then you would on any typical naturally aspirated setup.

i mean, throttle maps and shift tuning alone can produce great enhancements.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander

NickTF
250_Posts
250_Posts
Posts: 489
Joined: Thu Feb 11, 2016 1:01 pm
Model Year: 2014

Re: Diablosport tuner

Post by NickTF » Fri Jan 18, 2019 9:24 am

The surging I speak of i'm fairly sure is do to lean condition at part throttle where load isn't significant enough to cause audible detonation. It definitely doesn't feel like transmission surging. "Surging" has been used to describe many many issues though including things which very well could be trans related.

User avatar
PWJouster
250_Posts
250_Posts
Posts: 466
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: Diablosport tuner

Post by PWJouster » Thu Jan 24, 2019 1:18 pm

just purchased a new ECU/intune and custom tune from hemifever..... should be a couple weeks out before its installed, but call me dandy, im excited.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander

EasyDoesIt
250_Posts
250_Posts
Posts: 315
Joined: Fri Jan 05, 2018 11:32 am
Model Year: 2018
Location: Las Vegas, NV

Re: Diablosport tuner

Post by EasyDoesIt » Thu Jan 24, 2019 2:03 pm

PWJouster wrote:
Thu Jan 24, 2019 1:18 pm
just purchased a new ECU/intune and custom tune from hemifever..... should be a couple weeks out before its installed, but call me dandy, im excited.
Sub'd. Looking forward to your review.
Live: Las Vegas NV, Drive: 2018 PW & 2014 LR4

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3658
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Diablosport tuner

Post by olyelr » Thu Jan 24, 2019 2:34 pm

Dandy, keep us posted.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

User avatar
PWJouster
250_Posts
250_Posts
Posts: 466
Joined: Wed Dec 27, 2017 8:44 am
Model Year: 2018

Re: Diablosport tuner

Post by PWJouster » Thu Jan 24, 2019 2:44 pm

93 octane tune is what ill be running
with pedal commander
S and B intake
freer flowing exhaust...


should really wake up, but my goal is to remedy the transmission logic.

i have enough power, just drives like shit due to shifting too soon, and lugging all the time.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3658
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Diablosport tuner

Post by olyelr » Thu Jan 24, 2019 3:02 pm

PWJouster wrote:
Thu Jan 24, 2019 2:44 pm


i have enough power, just drives like shit due to shifting too soon, and lugging all the time.
Agree 100%! Shifts too soon and takes too much effort to downshift.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

Post Reply