New to Board - I'm a steel fabricator
-
Eldorado1492
- Posts: 1
- Joined: Tue Oct 08, 2019 8:14 pm
- Model Year: 2019
New to Board - I'm a steel fabricator
and the company I work for just started offering a front bumper for the Power Wagon. check out the new website https://www.highcountrycustoms.net/prod ... ram-bumper
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: New to Board - I'm a steel fabricator
Welcome to the group!
-
Bill2014
- 1000_Posts
- Posts: 1563
- Joined: Fri May 09, 2014 9:03 pm
- Model Year: 2014
- Location: Northern NY
Re: New to Board - I'm a steel fabricator
Welcome to the Group 
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Re: New to Board - I'm a steel fabricator
welcome! your going to have some people who recognize that bumper!
its a classy clean look!
its a classy clean look!
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
-
EasyDoesIt
- 250_Posts
- Posts: 315
- Joined: Fri Jan 05, 2018 11:32 am
- Model Year: 2018
- Location: Las Vegas, NV
Re: New to Board - I'm a steel fabricator
I was thinking the same thing. Saying that, that bumper design has always been at the top of my list.
Welcome to the Forum.
Live: Las Vegas NV, Drive: 2018 PW & 2014 LR4
Re: New to Board - I'm a steel fabricator
Welcome.
2012 Power Wagon - SOLD
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels
2021 75th Anniversary Edition
37.12.50 Toyo Open Country RT, Method Race Wheels, Rig'd Ultraswing Mega Fit, Thuren Rear Track Bar, Nanny Kill Switch, Switch Pros 9100, Amp Power Steps
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels
2021 75th Anniversary Edition
37.12.50 Toyo Open Country RT, Method Race Wheels, Rig'd Ultraswing Mega Fit, Thuren Rear Track Bar, Nanny Kill Switch, Switch Pros 9100, Amp Power Steps
-
Mule007
- 500_Posts
- Posts: 779
- Joined: Mon May 16, 2016 9:27 pm
- Model Year: 2015
- Location: Colton, Oregon
Re: New to Board - I'm a steel fabricator
Welcome to the forum, Enjoy 
nice looking bumper
nice looking bumper
SOLD: Never forgotten: Mule - 2005 Power Wagon, “Laramie”NEW: “Bear”: 2015 Ram 2500 Tradesman 4WD, Crew cab, 68K miles; 2nd Owner-Power steering, windows, brakes, Tip start, heated tow mirrors; Sirius, blue tooth, Alpine 6 speakers; 35% tinted windows, Black, diesel gray, silver interior; Systems: Driver Info Displays; TPMS, ESC; Power converter; AC; ERS controls on shifter. Anti theft system, vehicle immobilizer. Engine: 6.4L Hemi, Auto. HD 6-66RFE-6 speed transmission; 3.73:1 gears; 1 ton transmission oil cooler; 2-speed electric shift BW44-46 4WD shift on fly; Trans. skid plate. Axels: F-5,500 #; R-6,100#; Solid front, Anti- slip differential rear; Tow Pkg:: Rough Country 2.5” lift; Tekonsha Prodigy P2 trailer brake, HD Coil Springs, Bilstein B8 5100 shocks, WD hitch, F/R HD stabilizer bars; rear track bar; sway control; Tow Haul Mode, brake assist; Hill control; recalls completed; 5” oval SS steps; Wheels: XD KMC235 Grenade Crawl bead-lock wheels;
Upgrades: Brakes: Extreme Z36 Truck and Tow Drilled/Slotted F&R rotors & pads: CB; Uniden Pro 520XL; Tonneau: Extant Endure ALX cover; Alternator: HD Denso 180 amp; Battery: Interstate MTZ-AGM 94RH7 Premium 830CCA; Tires: Dean Back Country A/T2-35/1250R-18/12, MP3; Floor mats: Husky X-act contour; Muffler: FX catback #71416 SS after axle exit; Front/Rear Seat covers: Caterpillar Black/Grey
-
RustyPW
- 2000_Posts
- Posts: 5567
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: New to Board - I'm a steel fabricator
Welcome to the forum. 
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
-
OffroadTreks
- Moderator
- Posts: 2434
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: New to Board - I'm a steel fabricator
Welcome to the forum. Now people can get this bumper with confidence!
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-
04Ram2500Hemi
- 2000_Posts
- Posts: 2212
- Joined: Thu May 31, 2012 12:19 pm
- Model Year: 2012
- Location: Missoula, MT
Re: New to Board - I'm a steel fabricator
Welcome! Do you have more pics you can post, especially from straight on. This bumper is giving me bad intentions, but I’d like to see more pics.
Gone but Never Forgotten
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3
-
OffroadTreks
- Moderator
- Posts: 2434
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: New to Board - I'm a steel fabricator
This is the guy who bought the designs/inventory of the guy who built my bumper. Any Kinzer photo's you see, like in my build are the same bumper. But now built by someone who knows what he's doing. So all those issues are resolved.04Ram2500Hemi wrote: ↑Sun Nov 03, 2019 6:53 pmWelcome! Do you have more pics you can post, especially from straight on. This bumper is giving me bad intentions, but I’d like to see more pics.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-
04Ram2500Hemi
- 2000_Posts
- Posts: 2212
- Joined: Thu May 31, 2012 12:19 pm
- Model Year: 2012
- Location: Missoula, MT
Re: New to Board - I'm a steel fabricator
Thank you for the response. The OP only has one post, so I’m a little leery of ordering from somebody I don’t know.OffroadTreks wrote: ↑Fri Nov 08, 2019 11:11 amThis is the guy who bought the designs/inventory of the guy who built my bumper. Any Kinzer photo's you see, like in my build are the same bumper. But now built by someone who knows what he's doing. So all those issues are resolved.04Ram2500Hemi wrote: ↑Sun Nov 03, 2019 6:53 pmWelcome! Do you have more pics you can post, especially from straight on. This bumper is giving me bad intentions, but I’d like to see more pics.
Gone but Never Forgotten
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3
-
OffroadTreks
- Moderator
- Posts: 2434
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: New to Board - I'm a steel fabricator
Yeah, none of these guys seem to be good at the "INTERNET" 
Ya wanna market and sell those, or just wait around and hope someone stumbles onto it and buys one, lol.
Ya wanna market and sell those, or just wait around and hope someone stumbles onto it and buys one, lol.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
Re: New to Board - I'm a steel fabricator
looks cool but can you put on a light bar setup like what randy ellis lightbar does? I have 4 KC lights I need to mount there and also what about the sensors?
Power Wagon: Like a Jeep but for Men.
-
Hobiecatalyst
- Posts: 3
- Joined: Mon Nov 25, 2019 9:36 pm
- Model Year: 2016
Re: New to Board - I'm a steel fabricator
Here's is a much needed follow-up to this intro from High Country Customs: Eldorado no longer represents High Country Customs.
I am personally on PWR as the marketing and sales director of HCC for these front bumpers. You can read my introduction posted recently on here for more information about this.
These bumpers are produced and on the shelf- ready for purchase on https://www.highcountrycustoms.net/shop
Thanks to OffloadTreks for his support in this transition of the Kinzer front bumper design becoming owned and produced by HCC.
That is correct: the past issues of inadequate welds on the back of the panels has been resolved. These are now welded by professionals who are certified for structural welding in a welding shop with proper gas shielding, and are all inspected by the owner of the company before release. Also, the very long lead-time for production and shipping has been resolved as well. These are now produced in Gypsum Colorado. If anyone has questions about this update feel free to email me at hccoffroad@gmail.com. We look forward to getting these bumpers on your trucks! Thanks
Jsims006- the current design still has 2 4" diameter round ports for lights. If you would like to mount a light bar to the bumper I'd suggest (for off-roading functionality and protection to the light) to mount above the top edge of our bumper. Either purchase our raw metal version and weld tabs to it, or find alternate mounting spots separate from the bumper. I do not believe the Rand Ellis mounting bar will work with our bumper design- It looks as though our design has the winch opening width that that will not work with the width of the Ellis bar, it's wider.
I am personally on PWR as the marketing and sales director of HCC for these front bumpers. You can read my introduction posted recently on here for more information about this.
These bumpers are produced and on the shelf- ready for purchase on https://www.highcountrycustoms.net/shop
Thanks to OffloadTreks for his support in this transition of the Kinzer front bumper design becoming owned and produced by HCC.
That is correct: the past issues of inadequate welds on the back of the panels has been resolved. These are now welded by professionals who are certified for structural welding in a welding shop with proper gas shielding, and are all inspected by the owner of the company before release. Also, the very long lead-time for production and shipping has been resolved as well. These are now produced in Gypsum Colorado. If anyone has questions about this update feel free to email me at hccoffroad@gmail.com. We look forward to getting these bumpers on your trucks! Thanks
Jsims006- the current design still has 2 4" diameter round ports for lights. If you would like to mount a light bar to the bumper I'd suggest (for off-roading functionality and protection to the light) to mount above the top edge of our bumper. Either purchase our raw metal version and weld tabs to it, or find alternate mounting spots separate from the bumper. I do not believe the Rand Ellis mounting bar will work with our bumper design- It looks as though our design has the winch opening width that that will not work with the width of the Ellis bar, it's wider.
Re: New to Board - I'm a steel fabricator
this sounds great and all but I sent an email to high country customs on sunday. Its thursday and have not head back anything so I hope this is not how customer service is done at that company.
Power Wagon: Like a Jeep but for Men.
Re: New to Board - I'm a steel fabricator
It took them a few days to get back to me as their main business is other welding projects in that part of CO. Once they got in touch, I set up a time with the owner and drove out to have them install the bumper. They did a really nice job, and I am very pleased with my bumper. I did a write up on my build page a while back. Here's the truck with the new bumper.
2012 Power Wagon
Frame-welded Aluminess Rock Sliders, Kenda Klever RT (35/12.50R17), ARE Z-Series Topper, DeeZee Tailgate Assist, Husky X-act Contour Mats, Purple Cranium Diff Covers Front and Rear, Dodge Offroad Steering Brace, Thuren Track Bar, Thuren Short Arms, Thuren Fox 2.0 Remote Reservoir Shocks, Airlifter Ultimate 5000 airbags, Daystar Cradles, High Country Customs Bumper, Dynatrac ball joints, WWSP HD Towing Valve Body, PML Transmission pan, Thuren XD Swaybar Links, Thuren XS front coils, Abel Components Full Swaybar Bypass, All AMSOIL fluids from Code4Synthetics.com
Frame-welded Aluminess Rock Sliders, Kenda Klever RT (35/12.50R17), ARE Z-Series Topper, DeeZee Tailgate Assist, Husky X-act Contour Mats, Purple Cranium Diff Covers Front and Rear, Dodge Offroad Steering Brace, Thuren Track Bar, Thuren Short Arms, Thuren Fox 2.0 Remote Reservoir Shocks, Airlifter Ultimate 5000 airbags, Daystar Cradles, High Country Customs Bumper, Dynatrac ball joints, WWSP HD Towing Valve Body, PML Transmission pan, Thuren XD Swaybar Links, Thuren XS front coils, Abel Components Full Swaybar Bypass, All AMSOIL fluids from Code4Synthetics.com
-
Hobiecatalyst
- Posts: 3
- Joined: Mon Nov 25, 2019 9:36 pm
- Model Year: 2016
Re: New to Board - I'm a steel fabricator
jsims006- we have not received and email from you. please check the address. hccoffroad@gmail.com
Re: New to Board - I'm a steel fabricator
I used the contact form on your website. I will send directly to this one, thank you.Hobiecatalyst wrote: ↑Sat Jan 25, 2020 11:54 pmjsims006- we have not received and email from you. please check the address. hccoffroad@gmail.com
Power Wagon: Like a Jeep but for Men.