Power Wagon Registry

Got the final drawings back for the custom control box. This is the same box I used in the past, but I'm having them custom cut them for the connector. They are also thinning the side for clearance on the plug. This will allow me to use the gasket supplied with the connector rather than silicone. Before, the wall was too thick with the gasket in place and the plug wouldn't fully seat. Not that the previous boxes were bad, but these will look even better!

And here's a really cool 3D drawing. You can rotate and zoom within the PDF...

https://dl.dropboxusercontent.com/u/415 ... nector.PDF

I'm excited. Would there be a way for you to give us all a breakdown of your official list and expected times of completion (per batch)? I'm just curious to know (roughly) when I'll need to have the money available for you. The pay cut I took put me on a project budget and it would help to know when I'll need the $250 by. Thanks in advance!

Here's the current 10-13 list. I'd say mid October?

Juday
shaneo74
SheepdogOutdoorsman

Sweet. Hopefully i'm coming up soon

Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....

Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012

myoung84 wrote:Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....

Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012

Well, if it helps put the list in a slightly different order, I'll be ready to make payment on the 31st of October. I currently working on a rifle project for hunting season, so my project/fun budget is being split right now. Thanks for the update!

Sweet I am on the list, I used my lockers a lot these past few days but it sure would have been nice to use them in 4-hi. I am patiently waiting

Nothing better than lockers in 4-Hi, especially lockers in 4-Hi that lock up instantly...

let me no how to get a hold of you. I will buy a kit from you. I have a 2014 PW with 6.4

myoung84 wrote:Here's the "Official" 4th gen list. Notice there's one 2014 on the list as well. I've got JBM Power Wagon doing some testing on his new 2014 so assuming his works (99% sure it will) I'll have no problems with 2014s. Only difference will be a different plug at the rear axle, so it's not a whole new harness like the 3rd gens will be. My plan is to get at least a couple of these out each week. I can do two of them in one evening, and one evening a week is about all the free time I normally have. Keep in mind each one of these takes about 2 hours to build....

Juday 2010
shaneo74 2011
SheepdogOutdoorsman 2013
Pwagon12 2012
stubiePW 2012
RamMan 2012
TheDirtRoad 2014
Edge8970 2012

So I installed the locker bypass kit on my 2014 today with the new rear axle connector Myoung sent me and............ IT WORKS!!!!!!

I am sooooooo stoked I was able to transplant my 100% favorite mod from my 2011 over to my 2014!!!!!

A huge thank you to Myoung for making a great product and also working so hard to make the kit work on the 2014's and the 3G's.

I had to change the mounting spot due to a coolant reservoir being in the standard location. I was able to mount it up right behind the air box.

SWEET!

Excellent news!

Sent from my Samsung Galaxy Note 3.

myoung84 wrote:Excellent news!

Sent from my Samsung Galaxy Note 3.

Really excellent news !!!!

TheDirtRoad wrote:

myoung84 wrote:Excellent news!

Sent from my Samsung Galaxy Note 3.

Really excellent news !!!!

Oh yes it is!!! I head out hunting on Friday and am soooo happy I will be able to use the lockers in 4 hi.

My Dad just bought an 05PW and will need one of these for his truck.


Sent from my iPhone using Tapatalk/hopefully somewhere Offroad!

May I get on the list for a unit for my 2011 PW? I'll take one as soon as it's available. Thanks.

I would like to get in on the list as well.

I'll add you guys to the list!

Relay boards came in from Hong Kong! All 100 of them!
[attachment=-1]uploadfromtaptalk1414120183668.jpg[/attachment]

And I really like the new precut boxes! The connector fits great and I don't have to dremel the hole out!

[attachment=-1]uploadfromtaptalk1414120265592.jpg[/attachment]

Sent from my Samsung Galaxy Note 3.

Hey myoung84 would you mind adding me to the list too?
Dark84=2014 PW SLT


Sent from my iPhone using Tapatalk

Already have you on there.

Oh sweet, thank you very much good sir!


Sent from my iPhone using Tapatalk

Can I get on the list? I really want one for my 2010 as my first mod.

Add me to that list also, please and Thank you. 2014 SLT, this is exciting, I hate waiting for my lockers to quit thinking.