If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
-
gledel6257
- Posts: 3
- Joined: Sun Apr 07, 2024 10:47 am
Post
by gledel6257 » Sat Apr 27, 2024 11:36 am
Well, I pulled out the 3" rear spacers and sitting more level and safe to drive as well. Now it looks like i need mud flaps. Just washed it and in 1 day went through 1 puddle.
Black trucks! Does anyone have them? Pics? Brand? Part# for a 22? Asking lot, I know.
Sent from my SM-G986U using Tapatalk
-
KevinABQ
- 250_Posts

- Posts: 311
- Joined: Thu Oct 19, 2017 4:32 pm
- Model Year: 2018
- Location: Albuquerque
Post
by KevinABQ » Sat Apr 27, 2024 3:02 pm
My truck came with mud flaps when I bought it in Idaho from Dennis Dillon. Thar was a 2018 but I assume they were required there, so you could check with an Idaho Ram dealer.
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.
-
RustyPW
- 2000_Posts

- Posts: 5550
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Post
by RustyPW » Sat Apr 27, 2024 9:06 pm
I used a set from a auto parts store. Just a set of plane jane flexible rubber.
PWOC #53
2008 POWER WAGON RC
My build thread.
http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.

-
Mule
- 500_Posts

- Posts: 567
- Joined: Sat Nov 22, 2014 2:29 am
- Location: Rocky Mtns
-
Contact:
Post
by Mule » Sat Apr 27, 2024 11:35 pm
Buy a snowmobile. An expensive one.
Ride it for a while. Like, hard. Race it for a couple seasons too.
Eventually you'll wreck a bunch of parts. When you stab the track and ruin that, take it off and replace it. Keep the old one.
Cut the old track apart and make it your mud flaps.
That's what i'm doing with my next planned build.
-
DesertExplorer75
- Posts: 8
- Joined: Tue May 17, 2022 1:37 pm
- Model Year: 2017
- Location: Tehachapi, Ca
Post
by DesertExplorer75 » Tue Jul 30, 2024 12:08 am
2017 Tradesman Power Wagon in Bright White
#1452
Thuren .5 Front Springs -Thuren tuned Fox 2.0 shocks Thuren Front Track Bar - Thuren Rear Track Bar
Synergy Drag Link - Fox 2.0 ATS Steering Damper
AEV Salta HD Wheels with BFG KO2 37x12.5x17 tires
AAM 5.13 Gearing front and rear
Leer 100XL Camper Shell with Yakima/Whispbar Crossbars
Front and Rear bumpers Line-X'd
Baja Designs flush mount reverse lights in rear bumper
Line-X in bed
Morimoto bi-LED Headlights and LED Fogs
Factor 55 Prolink for the winch
Firestone Airbags with Daystar Cradle
Undercover Swing Case in truck bed
Front window tint 35%
Mopar all-weather floor mats
White Knuckle Sliders
SDHQ A-Pillar Brackets with Baja Designs XL80s
SPOD Bantam
Abel Full Smartbar Bypass with power via SPOD