If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
-
jeep_boy02
- 1000_Posts

- Posts: 1098
- Joined: Sat Feb 16, 2013 1:21 pm
Post
by jeep_boy02 » Sat Mar 20, 2021 3:06 pm
I've got the factory stuff and it's just, although I can only use 30% of it due to the sub on the bigger side. I've seen these "dividers" on the top of the lids on the newer models but I cent find any info on them. Dealer also couldn't find this. Anyone with them know a part number for the lid? I'm basically looking to see if the newer lids with the dividers will fit 2010. Here's a screen from the anniversary edition video
Sent from my SM-A015A using Tapatalk

-
Attachments
-

Last edited by
jeep_boy02 on Sat Mar 20, 2021 3:06 pm, edited 1 time in total.
2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon
-
jeep_boy02
- 1000_Posts

- Posts: 1098
- Joined: Sat Feb 16, 2013 1:21 pm
Post
by jeep_boy02 » Sat Mar 20, 2021 3:07 pm
And a diagram I found from searching the latch on a 2019
Sent from my SM-A015A using Tapatalk
2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon
-
FirerescuePW
- 1000_Posts

- Posts: 1661
- Joined: Sun May 20, 2012 12:51 pm
- Location: North Wales, PA
Post
by FirerescuePW » Sun Mar 21, 2021 3:11 pm
If you are talking about the plastic parts shown sitting on top of the carpeted piece, they are the folding support legs for the fold-flat cargo floor. They support the flat deck when in use. I have them in my '16 3500. The folding flat cargo deck in my '05 PW is metal.
Sent from my SM-G965U using Tapatalk
'05 Mineral Gray Power Wagon QC #1005
WINCH MOB PROUD!
SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
-
jeep_boy02
- 1000_Posts

- Posts: 1098
- Joined: Sat Feb 16, 2013 1:21 pm
Post
by jeep_boy02 » Sun Mar 21, 2021 8:41 pm
Ok... well that does make sense, I thought they were like foldflat cargo dividers.
But now you mention that I see how the lids look two layer and assume that they hinge out towards the front and those drop down to become supporting legs of sorts.
Sent from my SM-A015A using Tapatalk
2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon
-
Mule
- 500_Posts

- Posts: 567
- Joined: Sat Nov 22, 2014 2:29 am
- Location: Rocky Mtns
-
Contact:
Post
by Mule » Mon Mar 22, 2021 8:23 pm
use that space for electronics/audio stuff. It's nearly impossible to get to if there's anything in the back seat.
Electronics are a set-it-and-forget-it kinda thing. I'd hate to have to unload the entire back seat just to get a wrench out of a toolkit.

-
jeep_boy02
- 1000_Posts

- Posts: 1098
- Joined: Sat Feb 16, 2013 1:21 pm
Post
by jeep_boy02 » Mon Mar 22, 2021 9:41 pm
I've got the factory sub over there. I do keep my tool bag in the back seat and a bunch of crap all in the back, I probably could use the cargo floor and keep the seat folded up. But then again I'd probably get more use out of a seat delete.
Sent from my SM-A015A using Tapatalk
2010 black pearl(PXR) on 35s, bypass harness, gooseneck, CAI, 3" magnaflow catback, bulldog hemi GT.... more to come soon
-
olyelr
- 2000_Posts

- Posts: 3657
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Post
by olyelr » Tue Mar 23, 2021 11:01 pm
jeep_boy02 wrote: ↑Sun Mar 21, 2021 8:41 pm
Ok... well that does make sense, I thought they were like foldflat cargo dividers.
But now you mention that I see how the lids look two layer and assume that they hinge out towards the front and those drop down to become supporting legs of sorts.
Sent from my SM-A015A using Tapatalk
Yea the hinged plastic pieces fold up so when the upper door hinges toward the front to create the flat floor they become support legs (as the floor is lower).
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

-
olyelr
- 2000_Posts

- Posts: 3657
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Post
by olyelr » Tue Mar 23, 2021 11:03 pm
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
