Power Wagon Registry

just picked up my 2017 PW last weekend. i hear 2014+ trucks are a little more picky than previous years with LED lights. i was wondering what lights need canbus and which dont. it has some LED's from the factory . i am looking into changing out the following

-License plate lights
-3rd brake light cargo lights
-Ram box lights
-glove box lights

i also will be doing the low beams and fogs but i will probably just use setups from TRS.

You'll need resistors or "cancelers" for all but cargo lights if I'm not mistaken. Some brands don't need them but others will still give you a warning light even if labeled as "canbus" compatible.

I've done the interior, license plate, 3rd brake cargo, reverse and underhood lamp all without requiring resistors. Just make sure you buy the canbus compatible ones.

Sent from my XT1585 using Tapatalk

I bought Phillips Hi intensity LED for the cargo and back-up lights. I get a back-up light out message about every 3rd time I start my truck.

Damn from what I am seeing it seems to be hit or miss

Sent from my XT1650 using Tapatalk

NickPic83 wrote:Damn from what I am seeing it seems to be hit or miss

Sent from my XT1650 using Tapatalk

Bingo

Stick with JDM astar and Philips 921's you'll be OK.

Sent from my XT1585 using Tapatalk

Rodeoflyer wrote:Stick with JDM astar and Philips 921's you'll be OK.

Sent from my XT1585 using Tapatalk

Thanks. Assuming they need to be canbus too..?

Sent from my XT1650 using Tapatalk

Is it OK to link to another forum? I used the same ones this guy detailed in his posts. It should be everything you need to know.

http://www.ramforumz.com/showthread.php?t=217300

Sent from my XT1585 using Tapatalk

Rodeoflyer wrote:Is it OK to link to another forum? I used the same ones this guy detailed in his posts. It should be everything you need to know.

http://www.ramforumz.com/showthread.php?t=217300

Sent from my XT1585 using Tapatalk

Thanks!

Sent from my XT1650 using Tapatalk