If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
-
myoung84
- Vendor

- Posts: 1475
- Joined: Mon Jul 16, 2012 11:47 am
Post
by myoung84 » Fri Jan 24, 2014 12:35 pm
I'll be wrapping these up this weekend and
hopefully shipping out next week! I got the holes cut for the connector and the parts glued into the boxes last night. Have to wire all 8 boxes and finish building the last 4 harnesses.
Here's the waiting list that I have:
1. bigblackdodge
2. Mexican Import
3. blindsquirrel33
4. gtomike60
5. NNY Wagon
6. blathrop99
7. TrashyOilfield
8. jeep_boy02

2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
Mexican Import
- 50_Posts

- Posts: 114
- Joined: Wed Sep 25, 2013 10:41 pm
- Model Year: 2013
- Location: Rawlins Wyoming
Post
by Mexican Import » Fri Jan 24, 2014 2:32 pm
Has anyone installed, or reviewed this product yet? I'm still interested for sure and hope you take paypal just wonder why none of the original 3 seem to have been tested out.
-
dogcar3
- 250_Posts

- Posts: 261
- Joined: Thu Sep 20, 2012 4:55 pm
- Model Year: 2012
Post
by dogcar3 » Fri Jan 24, 2014 2:42 pm
I gave most of my feedback in PM's to myoung84. But it is pretty sweet. Works just like it should and my truck does not know the difference (no codes). The fit and finish is great, very easy install.
2012 Beast.
-
myoung84
- Vendor

- Posts: 1475
- Joined: Mon Jul 16, 2012 11:47 am
Post
by myoung84 » Fri Jan 24, 2014 3:06 pm
The original 4 were sold to 04Ram2500Hemi, RAM4ROKS, dogcar3, and TrueBlue13PW. The only one I got feedback from was dogcar3. I know 04Ram and ROKS haven't gotten theirs installed yet, not sure about TrueBlue.
Can you guys see if you can post in my vendor section? Either in the 4th gen thread or a new thread? I got some reports a while back that nobody could post there.
http://forum.powerwagonregistry.org/viewforum.php?f=22
And yes, PayPal is preferred. Everyone one that list please send me PM me or email me your PayPal email address and I'll shoot you over an invoice once these are ready to ship. There's a couple of you that have been emailing me already so I won't need this from you unless your PayPal address is different.
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
myoung84
- Vendor

- Posts: 1475
- Joined: Mon Jul 16, 2012 11:47 am
Post
by myoung84 » Fri Jan 24, 2014 3:36 pm
05PWrockcrawler wrote:I see your knocking those things out drinking some cold Dos XX
Sent from my iPhone using
Tapatalk
What other way is there? LOL
Still haven't done much with the 3rd gens. I'll keep you posted!
If you want to cut and splice, I can do it now. I just can't do plug-and-play yet. You'd have to cut/splice 5 wires either at the OEM knob or the smartbar.
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
Y2GREY
- Posts: 18
- Joined: Sun Dec 08, 2013 9:15 am
- Model Year: 2006
- Location: Fayetteville NY
Post
by Y2GREY » Fri Jan 24, 2014 8:40 pm
Waiting and watching for the 3G.
-
04Ram2500Hemi
- 2000_Posts

- Posts: 2212
- Joined: Thu May 31, 2012 12:19 pm
- Model Year: 2012
- Location: Missoula, MT
Post
by 04Ram2500Hemi » Sat Jan 25, 2014 10:19 am
I'm going to have to find some time to install mine, but there's no doubt the build quality is great. I just have to run out of honey-do's and then get mine installed.
Gone but Never Forgotten
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3
-
w2dodge
- 500_Posts

- Posts: 968
- Joined: Mon May 21, 2012 4:57 pm
- Location: nj..ny
Post
by w2dodge » Sat Jan 25, 2014 10:32 am
Y2GREY wrote:Waiting and watching for the 3G.
Same here
-
myoung84
- Vendor

- Posts: 1475
- Joined: Mon Jul 16, 2012 11:47 am
Post
by myoung84 » Sat Jan 25, 2014 10:49 am
04Ram2500Hemi wrote:I'm going to have to find some time to install mine, but there's no doubt the build quality is great. I just have to run out of honey-do's and then get mine installed.
If you're waiting to run out of honey-do's you'll never get it installed! Lol
Sent from my SCH-I535 using Tapatalk
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
Mexican Import
- 50_Posts

- Posts: 114
- Joined: Wed Sep 25, 2013 10:41 pm
- Model Year: 2013
- Location: Rawlins Wyoming
Post
by Mexican Import » Sat Jan 25, 2014 2:18 pm
So I was indeed unable to post anything in the vender section, so watch for a pm. I only tried in the 4g section.
-
myoung84
- Vendor

- Posts: 1475
- Joined: Mon Jul 16, 2012 11:47 am
Post
by myoung84 » Sat Jan 25, 2014 9:07 pm
You guys have worn me out! Got 8 boxes wired up today. Fingers are sore. Lol. I'll be finishing up the last four harnesses and they will be ready to ship.
Sent from my SCH-I535 using Tapatalk
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
blindsquirrel33
- 50_Posts

- Posts: 110
- Joined: Mon Jul 02, 2012 5:06 pm
- Model Year: 2011
- Location: 50 miles NE of Pittsburgh
Post
by blindsquirrel33 » Sun Jan 26, 2014 6:32 am
Looking forward to it!
-
myoung84
- Vendor

- Posts: 1475
- Joined: Mon Jul 16, 2012 11:47 am
Post
by myoung84 » Sun Jan 26, 2014 2:37 pm
They are done and ready to ship! Well almost... Somebody used all the boxes I had set aside of these at work. As long as I can find boxes locally, these will be ready to go out on Tuesday morning.
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
TrueBlue13PW
- 50_Posts

- Posts: 188
- Joined: Tue Sep 03, 2013 11:50 pm
- Model Year: 2013
Post
by TrueBlue13PW » Sun Jan 26, 2014 2:41 pm
myoung84 wrote:The original 4 were sold to 04Ram2500Hemi, RAM4ROKS, dogcar3, and TrueBlue13PW. The only one I got feedback from was dogcar3. I know 04Ram and ROKS haven't gotten theirs installed yet, not sure about TrueBlue.
Can you guys see if you can post in my vendor section? Either in the 4th gen thread or a new thread? I got some reports a while back that nobody could post there.
http://forum.powerwagonregistry.org/viewforum.php?f=22
And yes, PayPal is preferred. Everyone one that list please send me PM me or email me your PayPal email address and I'll shoot you over an invoice once these are ready to ship. There's a couple of you that have been emailing me already so I won't need this from you unless your PayPal address is different.
Myoung,
I don't see anywhere to reply on your Vendor section for the bypass. I have not had a chance to install mine yet. I'm really looking forward to getting it installed and trying it out. I've got a cold right now but hopefully I'll get a chance to install it next weekend.
-
gtomike60
- 50_Posts

- Posts: 211
- Joined: Tue Mar 05, 2013 8:28 pm
- Model Year: 2012
- Location: Milford,MA
Post
by gtomike60 » Mon Jan 27, 2014 5:37 am
Payment sent.
I can't post in your vendor section either.
2012
,MYoung locker bypass,Dynatrac bjs,Dynatrac no-spin kit w/Dynaloc hubs,Thuren 3" coils,trackbar,shackles and Kings(3"F-2.5"R) shocks,Thuren Alien arms,Thuren/King steering stabilizer,Thuren long travel leaf springs,Carli diff guard,White Knuckle sliders,Thuren bumper,37"x13.5 Yokohama X-M/Ts on Raceline Defender Wheels,Corsa exhaust
-
Will
- 2000_Posts

- Posts: 2601
- Joined: Mon Jan 27, 2014 7:16 am
- Model Year: 2010
Post
by Will » Mon Jan 27, 2014 7:56 am
I've sent an email (I think?) asking how to order and payment procedure. I just stumbled on this yesterday and registered to the forum this morning so forgive me if I haven't gone in the right direction yet but I want a smartbar bypass kit from you. thx.
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
-
myoung84
- Vendor

- Posts: 1475
- Joined: Mon Jul 16, 2012 11:47 am
Post
by myoung84 » Mon Jan 27, 2014 9:38 am
Thank you everyone who has sent payment. I'll get these out the door ASAP.
Will, I've got you on the new waiting list. It's been a slow process to get these out but I'll keep you posted!
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
Will
- 2000_Posts

- Posts: 2601
- Joined: Mon Jan 27, 2014 7:16 am
- Model Year: 2010
Post
by Will » Mon Jan 27, 2014 9:53 am
myoung84 wrote:Thank you everyone who has sent payment. I'll get these out the door ASAP.
Will, I've got you on the new waiting list. It's been a slow process to get these out but I'll keep you posted!
10-4, I haven't made enough posts to be able to send private messages so I'm not sure how to give you my information regarding payment. Do you need that in order to build or pay when shipped?
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
-
myoung84
- Vendor

- Posts: 1475
- Joined: Mon Jul 16, 2012 11:47 am
Post
by myoung84 » Mon Jan 27, 2014 11:04 am
Just pay when they are ready to ship.
2014 Ram 1500 4x4 Outdoorsman
Retro Shop Custom FXR Projectors | Diablo inTune | Moe's 87mm TB | BT Oil Catch Can
Toyo A/T II Tires | Bilstein 5100 Front and Rear Shocks | Movotech UCA's
AirLift 100 Air Bags | Bestop PowerBoards | RollBak Bed Cover | BedRug
-
fu227
- Posts: 13
- Joined: Sun Jan 26, 2014 7:01 pm
- Model Year: 2019
- Location: Las Vegas
Post
by fu227 » Mon Jan 27, 2014 10:30 pm
I would like to be added to the list. I have a 2013. I tried sending you a pm also, did you get it?
2021 75th anniversary
2013 sold
-
Pit Slave
- Vendor

- Posts: 1486
- Joined: Thu May 17, 2012 11:12 am
- Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....
Post
by Pit Slave » Mon Jan 27, 2014 11:21 pm
Guys, I'll get the PM's fixed for ya when I get home. It's a new member thing.
sent from my [insert random phone device] using Tap-a-doddle Pro! now for a small fee!
Nothing's more dead than a horse in a glue bottle.
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826
I guess you could say I'm a bit off center.....

-
Pit Slave
- Vendor

- Posts: 1486
- Joined: Thu May 17, 2012 11:12 am
- Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....
Post
by Pit Slave » Tue Jan 28, 2014 1:08 am
Will and fu227, you guys can send PM's now.
Nothing's more dead than a horse in a glue bottle.
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826
I guess you could say I'm a bit off center.....

-
Will
- 2000_Posts

- Posts: 2601
- Joined: Mon Jan 27, 2014 7:16 am
- Model Year: 2010
Post
by Will » Tue Jan 28, 2014 6:26 am
Pit Slave wrote:Will and fu227, you guys can send PM's now.
Cool, PM sent.
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.