Rear Diff Skid Plate? Yes! Mission Accomplished!

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
Post Reply
TwinStick

Re: Rear Diff Skid Plate?

Post by TwinStick » Thu Jun 07, 2012 11:40 pm

:idea: I have thought about axle skids as well. Get some 1/4" walled tube of proper dia & cut it in half down the middle & have the proper sized u-bolt clamps welded to the inside after each section is cut to length.
Top
User avatar
Ken G.
50_Posts
50_Posts
Posts: 238
Joined: Wed May 30, 2012 11:27 am
Location: Stafford, Virginia

Re: Rear Diff Skid Plate?

Post by Ken G. » Fri Jun 08, 2012 8:58 pm

:idea: Got an email from Jason Bruce at AFE. He said they have not made one yet for the AAM 10.5 PW rear diff, but he said that he has turned the matter over to their design team for review and potential production! :excited:

I wrote back and told him that if they made it, there would be a whole bunch of Power Wagon owners who would buy one! Let's keep our fingers crossed!! :winchmob: We'll keep after 'em until they get some more PW worthy parts on the market!
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
Top
06powerwagon06
50_Posts
50_Posts
Posts: 87
Joined: Sat May 19, 2012 8:31 pm
Location: Ontario, Canada

Re: Rear Diff Skid Plate?

Post by 06powerwagon06 » Fri Jun 08, 2012 9:41 pm

I like this idea!!!
'06 Black Power Wagon, Quad Cab, Heated Leather, 4" Boss Bars nerf bars, Locker Bypass, TPS Bypass, Smoked clearance lights, Tool Box, Recovery gear, Carli Front Diff Guard, Rockcrusher Rear Diff Cover, 60" Hi Lift Jack-Mounted in Tool Box, Bed Liner'd Front & Rear Bumpers, Rockers and Grill, "T" Steering Upgrade, DT ProFab Steering Brace, Kill Switch, 2-6" Aux. Lights Behind Grill, Back Up Lights, Wheel Well Liners, 315/70/17 Goodyear Wrangler Duratracs, Airflow Snorkel, Rock Rails fabbed by me, Borgeson Steering Shaft, etc..[/size]

Rausch Creek Spring '12
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1546
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: Rear Diff Skid Plate?

Post by AceMan » Sat Jun 09, 2012 3:51 am

Ken G. wrote::idea: Got an email from Jason Bruce at AFE. He said they have not made one yet for the AAM 10.5 PW rear diff, but he said that he has turned the matter over to their design team for review and potential production! :excited:

I wrote back and told him that if they made it, there would be a whole bunch of Power Wagon owners who would buy one! Let's keep our fingers crossed!! :winchmob: We'll keep after 'em until they get some more PW worthy parts on the market!
Nice! Thanks for contacting them and getting the ball rolling.: D

Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Image Image Image
Top
User avatar
GunniPWguy
500_Posts
500_Posts
Posts: 954
Joined: Fri May 25, 2012 11:52 am

Re: Rear Diff Skid Plate?

Post by GunniPWguy » Sat Jun 09, 2012 9:47 am

:rockon:
2005 Black Pow Wagon mods: DT Profab Steering Brace, Gibson superflow catback single exhaust system, Locker Bypass, Moog ball joints (see how long they last), New OEM track bar bushings, T-steering upgrade w/ Bilstein 5100 steering damper, Power everything, Heated leather seats, (keeps the better half happy), Rear window defrost, Bilstein 5100 shocks, 35x12.5x17 Toyo AT2 Extremes, Customized H2 alloy wheels, Original rock rails with family friendly steps welded on, Tri fold tonneau, Hi-lift extreme jack, Tool box along with all the essential PW gear. New winch cable, Winch TPS bypass, Cardan joint grease zerk discovery. New front grille assembly. Magnesium Chloride under coating.

If you ever happen to see me running somewhere, you should start running too. :)
Top
User avatar
cruz
1000_Posts
1000_Posts
Posts: 1002
Joined: Sat May 26, 2012 11:36 am
Location: Santa Cruz, CA

Re: Rear Diff Skid Plate?

Post by cruz » Sat Jun 09, 2012 11:50 am

Ken G. wrote::idea: Got an email from Jason Bruce at AFE. He said they have not made one yet for the AAM 10.5 PW rear diff, but he said that he has turned the matter over to their design team for review and potential production! :excited:

I wrote back and told him that if they made it, there would be a whole bunch of Power Wagon owners who would buy one! Let's keep our fingers crossed!! :winchmob: We'll keep after 'em until they get some more PW worthy parts on the market!
If I knew how to do it I would start a list to show them how many of us there are, If someone gets one going, I'm in.
Last edited by cruz on Sat Jun 09, 2012 3:48 pm, edited 1 time in total.
2005 Power Wagon
Top
User avatar
Ken G.
50_Posts
50_Posts
Posts: 238
Joined: Wed May 30, 2012 11:27 am
Location: Stafford, Virginia

Re: Rear Diff Skid Plate?

Post by Ken G. » Sat Jun 09, 2012 11:54 am

Yeah...I don't know how to set up those polls.....I am sure that most all of us on here would get one. They would certainly get back whatever they put into design and production, plus we could all do some great testing for them!! :twisted:
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1546
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: Rear Diff Skid Plate?

Post by AceMan » Sat Jun 09, 2012 12:08 pm

To do a poll would require a new thread. Let me see if I can do it through Tapatalk.

Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Image Image Image
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1546
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: Rear Diff Skid Plate?

Post by AceMan » Sat Jun 09, 2012 5:13 pm

I tried to make a new thread with a poll, but no dice. Leif, is that a permissions limitation?

Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Image Image Image
Top
User avatar
Pit Slave
Vendor
Vendor
Posts: 1486
Joined: Thu May 17, 2012 11:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Rear Diff Skid Plate?

Post by Pit Slave » Sat Jun 09, 2012 5:42 pm

What do you want for the poll? I'll add it in this thread.
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826

I guess you could say I'm a bit off center.....:D
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1546
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: Rear Diff Skid Plate?

Post by AceMan » Sat Jun 09, 2012 5:58 pm

I guess more if a vote for how many are in for a possible group buy that Ken can let that guy know there's a strong interest.

Thanks, Chris!

Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Image Image Image
Top
User avatar
ldgregory
Site Admin
Site Admin
Posts: 640
Joined: Wed May 16, 2012 8:29 am
Location: Albuquerque, NM
Contact:
Contact ldgregory

Re: Rear Diff Skid Plate?

Post by ldgregory » Sat Jun 09, 2012 5:59 pm

AceMan wrote:I tried to make a new thread with a poll, but no dice. Leif, is that a permissions limitation?

Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Fixed. Registered Users can now make polls across various forums.
2023 Power Wagon
Mods: 37" Open Country R/T Trail tires, Badlands Apex Predator 12,000lbs winch, LASFIT Truck Bed Mat

Previous Truck
2005 Dodge Power Wagon #9-05-0536
Top
User avatar
Pit Slave
Vendor
Vendor
Posts: 1486
Joined: Thu May 17, 2012 11:12 am
Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....

Re: Rear Diff Skid Plate?

Post by Pit Slave » Sat Jun 09, 2012 6:01 pm

ldgregory wrote:
AceMan wrote:I tried to make a new thread with a poll, but no dice. Leif, is that a permissions limitation?

Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Fixed. Registered Users can now make polls across various forums.
Even better! :rockon:
Nothing's more dead than a horse in a glue bottle.Image

There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826

I guess you could say I'm a bit off center.....:D
Top
User avatar
AceMan
Site Admin
Site Admin
Posts: 1546
Joined: Tue May 22, 2012 11:27 am
Model Year: 2006
Location: Delaware County, PA
Contact:
Contact AceMan

Re: Rear Diff Skid Plate?

Post by AceMan » Sat Jun 09, 2012 6:59 pm

Thanks!


Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Image Image Image
Top
MSparks909
250_Posts
250_Posts
Posts: 429
Joined: Mon May 21, 2012 2:43 pm
Location: New Bern/Wilmington, NC

Re: Rear Diff Skid Plate?

Post by MSparks909 » Sun Jun 10, 2012 12:31 am

I'm going to talk to my buddy tomorrow who is a welder/fabricator by occupation. He's done a ton of custom fab and welding on his project CJ that he's hoping that I'll trailer to Rausch this fall so I'm going to see if we can possibly come up with a prototype on my truck. If he thinks that it's feasible then I'll post up pics and maybe he can produce them if the AFE guys can't :rockon:
2006 QC PW G56

Suspension: 3" Thuren Diesel coils, Carli Progressive leaf springs, Thuren DYSKO bumpstops, Thuren control arms, Thuren tracbar, Thuren draglink, King 2.5" remote reservoir front shocks/2.5" King DBL bypass rear shocks, limit straps, factory swaybar end links extended 2",

Engine/Drivetrain: Airaid full intake, Airflow snorkel, Magnaflow y-pipe, 3" Flowmaster Super 44, Jet 180 t-stat, locker bypass. Carli balljoints. greasable front u-joints, Gorilla Juice in the G56, Royal Purple 75W-140 in the diffs, Shell Rotella 5W-40 in the engine w/ oversize K&N filter.

Body/Appearance: Go Recon super white cab lights, Retro Solutions 55W 6000K HID kit for headlights/fogs and projector retro'd headlight, Carli front diff guard, Rockcrusher rear diff guard, lots of pinstriping & some dents

Interior: 12" JL Audio sub in custom box w/ adjustable bass knob and 500W JL Audio amplifier, headrest gun sling, CB radio
Top
User avatar
VA_Wagon Man
500_Posts
500_Posts
Posts: 737
Joined: Mon May 21, 2012 10:54 am
Location: Virginia

Re: Rear Diff Skid Plate?

Post by VA_Wagon Man » Sun Jun 10, 2012 7:20 am

MSparks909 wrote:I'm going to talk to my buddy tomorrow who is a welder/fabricator by occupation. He's done a ton of custom fab and welding on his project CJ that he's hoping that I'll trailer to Rausch this fall so I'm going to see if we can possibly come up with a prototype on my truck. If he thinks that it's feasible then I'll post up pics and maybe he can produce them if the AFE guys can't :rockon:
Sounds good. :popcorn:
Long Gone:
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,

Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!

"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--
Top
User avatar
Ken G.
50_Posts
50_Posts
Posts: 238
Joined: Wed May 30, 2012 11:27 am
Location: Stafford, Virginia

Re: Rear Diff Skid Plate?

Post by Ken G. » Sun Jun 10, 2012 7:53 am

Also, as a back-up to AFE, I will see what the guys at Iron Pig Off Road could do to fab one, also. Whichever one we choose, we should get photos of the designs or prototypes and post them, so that we can decide which to go with. Then do a group buy?
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
Top
User avatar
Powerwagonmark
50_Posts
50_Posts
Posts: 189
Joined: Fri May 25, 2012 3:56 pm
Model Year: 2008
Location: Ontario, Canada

Re: Rear Diff Skid Plate?

Post by Powerwagonmark » Sun Jun 10, 2012 11:20 pm

Hopefully AFE will make one for us becuase I took a look and didn't really see a good way to mount it. I have seen some that mount behind the diff cover you just put longer bolts but I don't like those because on a hard impact those would probably damage the threads and give you a leak.
Attachments
images.jpg
images.jpg (11.88 KiB) Viewed 5320 times
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears

Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Top
User avatar
Ken G.
50_Posts
50_Posts
Posts: 238
Joined: Wed May 30, 2012 11:27 am
Location: Stafford, Virginia

Re: Rear Diff Skid Plate?

Post by Ken G. » Mon Jun 11, 2012 6:53 am

Yeah, I know what you're saying. The one I had on my Ford 9" diff from my old CJ did use a bolts mountedcinto the diff, but with the actual skid plate finishing off by attaching to the yoke, near the driveshaft, it ended up being really strong. It took some pretty good hits when I ran it in my Jeep.....if we find a design similar to that, we should be well protected. I know it will have to mount a bit differently, but one of these places should be able to come up with something! Hell, it ain't rocket science! I'm gonna find someone who'll make it for us!
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
Top
twistedpw
50_Posts
50_Posts
Posts: 70
Joined: Wed May 30, 2012 8:16 pm
Location: clinton, ont, Canada

Re: Rear Diff Skid Plate?

Post by twistedpw » Mon Jun 11, 2012 12:05 pm

i tried looking up AFE and all i got was a aftermarket intake and exaust manufacturer, are these the guys your talking about?

http://afepower.com/
06 White POWER WAGON!

Pure Performance control arms
Flexalite e-fan
Rock-rails (by me)
Diablo sport tuner
Bushwacker pocket style flares
Rock Monster beadlocks
BFG KM2's
Airflow snorkel
Bed rug
Bilstein 5100's
Thuren coils & shackels
Top
User avatar
Ken G.
50_Posts
50_Posts
Posts: 238
Joined: Wed May 30, 2012 11:27 am
Location: Stafford, Virginia

Re: Rear Diff Skid Plate?

Post by Ken G. » Mon Jun 11, 2012 6:45 pm

Yep...same guys.....they don't have their front diff guard on their website, for some strange reason. However, they do make a front diff one. I wrote a guy on their contact list to get the ball rolling. I'll probably give him another day to let me know if they are going to make what we want or not. After that, I will probably call them. If all that fails, I'll talk to Iron Pig and see what they would charge and if they would work with us on the price point, if we do a group buy. I'm teaching a course all of this week, so it will be catch as catch can to make calls, etc. I can devote a bit more time to it next week.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
Top
User avatar
Powerwagonmark
50_Posts
50_Posts
Posts: 189
Joined: Fri May 25, 2012 3:56 pm
Model Year: 2008
Location: Ontario, Canada

Re: Rear Diff Skid Plate?

Post by Powerwagonmark » Mon Jun 11, 2012 7:10 pm

Ok Ken Thanks and keep us posted.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears

Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Top
MSparks909
250_Posts
250_Posts
Posts: 429
Joined: Mon May 21, 2012 2:43 pm
Location: New Bern/Wilmington, NC

Re: Rear Diff Skid Plate?

Post by MSparks909 » Tue Jun 12, 2012 2:38 pm

Hoping to start mocking up a prototype this weekend. Big party Friday night so I'll see my friend there. Might mock up some stuff with cardboard this weekend :D Will keep you guys posted.
2006 QC PW G56

Suspension: 3" Thuren Diesel coils, Carli Progressive leaf springs, Thuren DYSKO bumpstops, Thuren control arms, Thuren tracbar, Thuren draglink, King 2.5" remote reservoir front shocks/2.5" King DBL bypass rear shocks, limit straps, factory swaybar end links extended 2",

Engine/Drivetrain: Airaid full intake, Airflow snorkel, Magnaflow y-pipe, 3" Flowmaster Super 44, Jet 180 t-stat, locker bypass. Carli balljoints. greasable front u-joints, Gorilla Juice in the G56, Royal Purple 75W-140 in the diffs, Shell Rotella 5W-40 in the engine w/ oversize K&N filter.

Body/Appearance: Go Recon super white cab lights, Retro Solutions 55W 6000K HID kit for headlights/fogs and projector retro'd headlight, Carli front diff guard, Rockcrusher rear diff guard, lots of pinstriping & some dents

Interior: 12" JL Audio sub in custom box w/ adjustable bass knob and 500W JL Audio amplifier, headrest gun sling, CB radio
Top
User avatar
Ken G.
50_Posts
50_Posts
Posts: 238
Joined: Wed May 30, 2012 11:27 am
Location: Stafford, Virginia

Re: Rear Diff Skid Plate?

Post by Ken G. » Tue Jun 12, 2012 5:43 pm

MSparks909 wrote:Hoping to start mocking up a prototype this weekend. Big party Friday night so I'll see my friend there. Might mock up some stuff with cardboard this weekend :D Will keep you guys posted.
Cool. 8-) we'll see what we can collectively come up with between your buddy, AFE, and the local shop near me...Iron Pig Off Road.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
Top
TwinStick

Re: Rear Diff Skid Plate?

Post by TwinStick » Tue Jun 12, 2012 11:22 pm

This is good stuff. Thats how the snorkel for our trucks got rolling. Some guy :roll: started a thread about it on a different interweb site. Took a while, but damn if it didn't get produced, ( & i STILL don't have one yet). LOL :lol:
Top
Post Reply

Return to “Power Wagon Talk”