Truck will not go over 4,000 RPM.

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
Post Reply
RotorWolf
Posts: 20
Joined: Tue Aug 18, 2015 7:43 pm

Truck will not go over 4,000 RPM.

Post by RotorWolf » Wed Aug 19, 2015 12:22 am

So the first time I experienced this, I went through about a foot of water at about 15 mph slowed down after the wave.. Then punched it and it was like I hit a wall at 4,000 RPM, I let off then accelerated through 50 mph (below 4k). So I stopped and punched it again and the same thing happened wall at 4k. Once I got home I shut the truck off and went straight for the air box thinking I ingested some water and found it dry as a bone. Take my truck for a drive and everything was back to normal...
So I can repeat this very easily, every time I hit deep water I get the same 4k wall. Then all I have to do is shut off the truck, restart and everything is back to normal.
No codes ever.
Any ideas??
Moisture sensing?
Abuse prevention??
Maybe the tansmission harness has a short making the computer think it's in nuteral.

Ducky's Dad
1000_Posts
1000_Posts
Posts: 1522
Joined: Thu May 24, 2012 10:55 pm

Re: Truck will not go over 4,000 RPM.

Post by Ducky's Dad » Wed Aug 19, 2015 12:39 am

Probably some sort of abuse prevention rev limiter kicking in. My '05 would only touch 3900-4000rpm when revved in neutral and it was obviously bouncing off a rev limiter, but would easily go above 4000rpm when driving in any gear (auto). When I installed the 87 econo tune recently with my Edge Evolution programmer, the engine will now rev to 5000rpm in neutral.

User avatar
verdesardog
500_Posts
500_Posts
Posts: 989
Joined: Thu May 31, 2012 11:24 am
Model Year: 2006

Re: Truck will not go over 4,000 RPM.

Post by verdesardog » Wed Aug 19, 2015 9:41 am

hehe what's wrong with those numbers? the engine in my truck REDLINES at 3200rpm. :doh:
2006 Big Horn 2500 Ram CTD. IMAGINE ALL THE PEOPLE LIVING LIFE IN PEACE
Image

Ducky's Dad
1000_Posts
1000_Posts
Posts: 1522
Joined: Thu May 24, 2012 10:55 pm

Re: Truck will not go over 4,000 RPM.

Post by Ducky's Dad » Wed Aug 19, 2015 1:24 pm

the engine in my truck REDLINES at 3200rpm.
I had a '39 Chevy like that, about the same color as your truck.

RotorWolf
Posts: 20
Joined: Tue Aug 18, 2015 7:43 pm

Re: Truck will not go over 4,000 RPM.

Post by RotorWolf » Sun Jul 24, 2016 5:57 pm

Bump, same thing except I was in 2 wheel drive and the rpms were limited to 5 k.
Anyone have any ideas??

User avatar
coder
1000_Posts
1000_Posts
Posts: 1346
Joined: Wed Jun 06, 2012 5:18 pm
Model Year: 2007
Location: Trabuco Canyon, CA

Re: Truck will not go over 4,000 RPM.

Post by coder » Sun Jul 24, 2016 7:33 pm

I'm not sure which motor you have but something is definitely wrong based on the factory horsepower and torque ratings nothing should be stopping at 4,000 rpms.

[Hemi 5.7]
Horsepower 345 @ 5,600 rpm
Torque 375 @ 4,400 rpm

[Hemi 6.4]
Horsepower 410 @ 5,600 rpm
Torque 429 @ 4,400 rpm
Vehicle: 2007 Power Wagon Quad Cab - Factory Options (Inferno Red, Premium Cloth Bench Seat, Light Group, Automatic Transmission, Leather Steering Wheel)
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass

User avatar
nts007
2000_Posts
2000_Posts
Posts: 2284
Joined: Wed Dec 11, 2013 10:01 pm
Model Year: 2008
Location: Sask, Canada, Earth

Re: Truck will not go over 4,000 RPM.

Post by nts007 » Sun Jul 24, 2016 7:46 pm

Traction control??
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more

waldo
250_Posts
250_Posts
Posts: 426
Joined: Sat Dec 26, 2015 7:46 am
Model Year: 2019

Re: Truck will not go over 4,000 RPM.

Post by waldo » Sun Jul 24, 2016 11:27 pm

nts007 wrote:Traction control??
Sounds possible.
2007 and 2019 Power Wagons

laramieskibum
50_Posts
50_Posts
Posts: 89
Joined: Thu Aug 07, 2014 9:47 pm

Re: Truck will not go over 4,000 RPM.

Post by laramieskibum » Mon Jul 25, 2016 9:40 pm

waldo wrote:
nts007 wrote:Traction control??
Sounds possible.
Good thought. Happens to me. Do te early 3Gs have it?
2014 CCSB Tradesman 2500 -- G56 -- AEV dualsport -- AEV Katla -- 37x12.5r17 Toyo MT -- 315/70r17 Nokian Hakkapeliitta -- AEV bumper -- VisionX 6.7" light cannon -- Warn 16.5TI -- Mopar flares -- 8.4" Uconnect swap w/ customtronix jailbreak (front/rear/trailer cam) -- 3.73 gears w/ ARB front and rear -- Switch-Pros 8100

waldo
250_Posts
250_Posts
Posts: 426
Joined: Sat Dec 26, 2015 7:46 am
Model Year: 2019

Re: Truck will not go over 4,000 RPM.

Post by waldo » Mon Jul 25, 2016 10:13 pm

laramieskibum wrote:
waldo wrote:
nts007 wrote:Traction control??
Sounds possible.
Good thought. Happens to me. Do te early 3Gs have it?
My 07 doesn't.
2007 and 2019 Power Wagons

User avatar
MSCH2112
250_Posts
250_Posts
Posts: 369
Joined: Mon Sep 17, 2012 11:45 pm
Model Year: 2012
Location: Reno, NV

Re: Truck will not go over 4,000 RPM.

Post by MSCH2112 » Mon Jul 25, 2016 10:27 pm

here's some reading info below. and yeah, it's the traction control thing.

http://forum.powerwagonregistry.org/vie ... on+control

FYI, regarding snowsled's comments, he's old school and hate's electronics. the addition of an am/fm radio even sends him over the edge.

mike
2017 Ram 2500 Longhorn Cummins
295 60 R20 Nitto Ridge Graplers
Gooseneck
Pace Edwards elec.Metal Jacket bed cover
yeah and running boards for the wifey
Support Search and Rescue-GET LOST

SOLD 2012 Power Wagon Laramie
w/ 12k Warn winch, Nav, Sunroof, Leer Topper, AMP boards, Spray on-bedliner-rockers-flares

SOLD 2005 Power Wagon w/ 12k Warn winch, loaded incl. leather, rockrails, nav, sunroof, 9.5 ti Warn winch in the rear, Gibson Headers and catback, Pace-Edwards full metal elec. bed cover and elec. tailgate lock, PIAA driving lights behind grill

2009 Victory Jackpot Cory Ness Edition

2016 GMC Yukon Denali XL

2016 Volvo XC90

RustyPW
2000_Posts
2000_Posts
Posts: 5575
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Truck will not go over 4,000 RPM.

Post by RustyPW » Mon Jul 25, 2016 11:31 pm

MSCH2112 wrote:here's some reading info below. and yeah, it's the traction control thing.

http://forum.powerwagonregistry.org/vie ... on+control

FYI, regarding snowsled's comments, he's old school and hate's electronics. the addition of an am/fm radio even sends him over the edge.

mike
:rofl:
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

Post Reply