Replacement nylon bushings for winch rollers

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
Post Reply
User avatar
leo72987
250_Posts
250_Posts
Posts: 492
Joined: Tue Nov 05, 2013 1:38 pm
Location: Ware, MA

Replacement nylon bushings for winch rollers

Post by leo72987 » Thu May 14, 2015 11:09 am

Hey guys so I know you can order replacement roller packages from the dealer I have spare set. My question is have any of you found replacement bushings for the rollers? One cracked and fell off lol... I hate to take one from my new set.... I rather just buy new bushings I know the dealer doesn't sell them separately.
2005 Wagon Standard Cab Auto,Bilstein 5100's,White Knuckle Sliders,Dodge Offroad Diff covers,Cooper St Maxx's stock size, Hardwired lockers,Evo manual sway bar disconnect conversion, DT Pro Fab Sway Bar links
Top
User avatar
Mule
500_Posts
500_Posts
Posts: 567
Joined: Sat Nov 22, 2014 2:29 am
Location: Rocky Mtns
Contact:
Contact Mule

Re: Replacement nylon bushings for winch rollers

Post by Mule » Thu May 14, 2015 3:29 pm

local hardware store doesn't have something that'll fit? :dunno
Top
User avatar
leo72987
250_Posts
250_Posts
Posts: 492
Joined: Tue Nov 05, 2013 1:38 pm
Location: Ware, MA

Re: Replacement nylon bushings for winch rollers

Post by leo72987 » Thu May 14, 2015 4:33 pm

Mule wrote:local hardware store doesn't have something that'll fit? :dunno
Honestly never even considered it lol I will have to check out my local Lowes thanks for the suggestion!
2005 Wagon Standard Cab Auto,Bilstein 5100's,White Knuckle Sliders,Dodge Offroad Diff covers,Cooper St Maxx's stock size, Hardwired lockers,Evo manual sway bar disconnect conversion, DT Pro Fab Sway Bar links
Top
User avatar
Mule
500_Posts
500_Posts
Posts: 567
Joined: Sat Nov 22, 2014 2:29 am
Location: Rocky Mtns
Contact:
Contact Mule

Re: Replacement nylon bushings for winch rollers

Post by Mule » Thu May 14, 2015 6:04 pm

I'd go to a smaller local shop... ace hardware around here is good.
Find the old guy that works there. He'll know where everything is.

Lowes/HomeDepot doesn't carry much in the way of small screws/nuts/bolts/washers/etc, and the people that work there probably won't know where anything is either. "A 4-40 half-inch what? Is that an electrical cable?"
Top
User avatar
Stickman
500_Posts
500_Posts
Posts: 829
Joined: Mon Nov 18, 2013 12:02 am
Model Year: 2012
Location: Wayland, MO

Re: Replacement nylon bushings for winch rollers

Post by Stickman » Thu May 14, 2015 6:21 pm

Yea, Ace Hardware or Fastenal should have something or can get something if they don't have it. When I need something one off or kind of a special order, 99% of the time they have it in stock or can order it.
Live To Ride, Ride To Live

2012 Ram Power Wagon - Check out my build thread to see my mods! http://forum.powerwagonregistry.org/vie ... =13&t=2187
Top
User avatar
leo72987
250_Posts
250_Posts
Posts: 492
Joined: Tue Nov 05, 2013 1:38 pm
Location: Ware, MA

Re: Replacement nylon bushings for winch rollers

Post by leo72987 » Thu May 14, 2015 11:05 pm

Hey guys i just so happen to work next to a rockys haha i will stop there on my lunch tomorrow and let you know what i find!
2005 Wagon Standard Cab Auto,Bilstein 5100's,White Knuckle Sliders,Dodge Offroad Diff covers,Cooper St Maxx's stock size, Hardwired lockers,Evo manual sway bar disconnect conversion, DT Pro Fab Sway Bar links
Top
User avatar
Powerwagon Nut
50_Posts
50_Posts
Posts: 61
Joined: Sat Apr 19, 2014 7:26 pm

Re: Replacement nylon bushings for winch rollers

Post by Powerwagon Nut » Fri May 15, 2015 4:37 pm

Here is a link to the warn parts page...they might sell them.

http://warn.iwebcat.com/_Members/lookups/partdetail.asp
2005 Flame Red Powerwagon. Keep the shiny side up!
Top
User avatar
coder
1000_Posts
1000_Posts
Posts: 1346
Joined: Wed Jun 06, 2012 5:18 pm
Model Year: 2007
Location: Trabuco Canyon, CA

Re: Replacement nylon bushings for winch rollers

Post by coder » Fri May 15, 2015 7:45 pm

leo72987 wrote:Hey guys so I know you can order replacement roller packages from the dealer I have spare set. My question is have any of you found replacement bushings for the rollers? One cracked and fell off lol... I hate to take one from my new set.... I rather just buy new bushings I know the dealer doesn't sell them separately.
If it was me I would just put on the spare set you don't want to skimp on winch parts for safety reasons.
Vehicle: 2007 Power Wagon Quad Cab - Factory Options (Inferno Red, Premium Cloth Bench Seat, Light Group, Automatic Transmission, Leather Steering Wheel)
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
Top
User avatar
chromedragon
50_Posts
50_Posts
Posts: 144
Joined: Thu May 31, 2012 2:20 pm
Contact:
Contact chromedragon

Re: Replacement nylon bushings for winch rollers

Post by chromedragon » Mon Jun 22, 2015 8:21 pm

Sorry to resurrect the thread but it seems related. I have just ordered my synthetic winch line ( custom splice, 7/16 100 feet Amsteel) I noticed the rollers are a bit chewed up due to the need to use the winch....I want to see if some one can tell me the actual dimensions for the rollers. I cant seem to find a kit part number but I can find rollers in varying sizes. if some one can provide me the dimensions as im not any place near my truck but I have time to research them where I am. Any help would be appreciated.
2006 Power Wagon Quad Cab Manual Moto Rims stock size, Cooper ATP, Dynatrac Ball joints, Dynatrac Free spin kit with Warn hubs, AmSteel blue 7/16 x 100' synthetics rope from Custom splice, Sony BT 602 stereo and backup camera etc. Rancho 9000XL adjustable shocks.

Special Licenses:
FAA Airframe and Power Plant
FCC Technician (Ham) KK6YCI

“An armed society is a polite society. Manners are good when one may have to back up his acts with his life.”
"No statement should be believed because it is made by an authority.

Robert A. Heinlein
Top
User avatar
Cactus Red
Moderator
Moderator
Posts: 1862
Joined: Sun May 20, 2012 6:43 pm
Location: Chino Valley, AZ.

Re: Replacement nylon bushings for winch rollers

Post by Cactus Red » Mon Jun 22, 2015 10:08 pm

You can deburr and polish the stock rollers if need be. As long as they are free of anything to snag the rope, they work fine. Can't help on dimensions, but I've searched and not found any long enough for our rollers.

Dennis Miller "You can't order black coffee anymore. It's un-creamed..."
I'm just along for the ride...
Top
User avatar
Mr.Smith
1000_Posts
1000_Posts
Posts: 1131
Joined: Wed Sep 04, 2013 6:36 pm
Model Year: 2009
Location: Fort Collins, CO.

Re: Replacement nylon bushings for winch rollers

Post by Mr.Smith » Tue Jun 23, 2015 12:36 am

What about Daystar rollers...???
Top
User avatar
Will
2000_Posts
2000_Posts
Posts: 2601
Joined: Mon Jan 27, 2014 7:16 am
Model Year: 2010

Re: Replacement nylon bushings for winch rollers

Post by Will » Tue Jun 23, 2015 5:44 am

Take them off and polish them back up. I run synthetic and haven't had an issue doing that.
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333

I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
Top
User avatar
leo72987
250_Posts
250_Posts
Posts: 492
Joined: Tue Nov 05, 2013 1:38 pm
Location: Ware, MA

Re: Replacement nylon bushings for winch rollers

Post by leo72987 » Tue Jun 23, 2015 9:04 am

You guys can buy replacement roller packages from Dodge they are cheap. I put this info in our FAQ section a year or so ago. I stocked up on these suckers since who knows how long they will be available. Some online sites don't list these... You may or may not need to go to a Chrysler Dealer. I never had any luck finding the replacement nylon inserts :(. If you search for the vertical roller part number it will come up as not available but they indeed are. I went to a dealer and they were able to get me some.

Horizontal roller Mopar 05143198AA
Vertical roller Mopar 05143199AA
2005 Wagon Standard Cab Auto,Bilstein 5100's,White Knuckle Sliders,Dodge Offroad Diff covers,Cooper St Maxx's stock size, Hardwired lockers,Evo manual sway bar disconnect conversion, DT Pro Fab Sway Bar links
Top
User avatar
chromedragon
50_Posts
50_Posts
Posts: 144
Joined: Thu May 31, 2012 2:20 pm
Contact:
Contact chromedragon

Re: Replacement nylon bushings for winch rollers

Post by chromedragon » Sat Jun 27, 2015 7:32 pm

sweet thank you
2006 Power Wagon Quad Cab Manual Moto Rims stock size, Cooper ATP, Dynatrac Ball joints, Dynatrac Free spin kit with Warn hubs, AmSteel blue 7/16 x 100' synthetics rope from Custom splice, Sony BT 602 stereo and backup camera etc. Rancho 9000XL adjustable shocks.

Special Licenses:
FAA Airframe and Power Plant
FCC Technician (Ham) KK6YCI

“An armed society is a polite society. Manners are good when one may have to back up his acts with his life.”
"No statement should be believed because it is made by an authority.

Robert A. Heinlein
Top
User avatar
leo72987
250_Posts
250_Posts
Posts: 492
Joined: Tue Nov 05, 2013 1:38 pm
Location: Ware, MA

Re: Replacement nylon bushings for winch rollers

Post by leo72987 » Sun Jun 28, 2015 7:33 am

chromedragon wrote:sweet thank you
No problem at all!!
2005 Wagon Standard Cab Auto,Bilstein 5100's,White Knuckle Sliders,Dodge Offroad Diff covers,Cooper St Maxx's stock size, Hardwired lockers,Evo manual sway bar disconnect conversion, DT Pro Fab Sway Bar links
Top
Post Reply

Return to “Power Wagon Talk”