If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
-
cruz
- 1000_Posts

- Posts: 1002
- Joined: Sat May 26, 2012 11:36 am
- Location: Santa Cruz, CA
Post
by cruz » Sat Oct 25, 2014 3:11 pm
fbenross wrote:I kept mine pretty much stock. Which really sets it apart from most here.

Same here, though I did change the tires.
adeluca73 wrote:fbenross wrote:I kept mine pretty much stock. Which really sets it apart from most here.


I now have more

for gas and camping expenses.

2005 Power Wagon
-
Will
- 2000_Posts

- Posts: 2601
- Joined: Mon Jan 27, 2014 7:16 am
- Model Year: 2010
Post
by Will » Mon Oct 27, 2014 8:04 am
I have the brake lights and reverse lights on switches so i can turn them off when hog hunting with night vision. That way when I hit the brakes or throw it in reverse, the lights dont come on. If only I could figure out how to make the interior lights black out when the lights are off, it would be perfect. My '07 had the feature on the dimmer dial, not on this on...(2010) Right now I just toss the bag for my nv in the dash to cover it up.
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
-
Mpersicke87
- 250_Posts

- Posts: 331
- Joined: Thu Oct 16, 2014 11:36 pm
- Model Year: 2013
Post
by Mpersicke87 » Tue Oct 28, 2014 10:22 pm
Copperhead Laramie package.
Haven't seen another one yet.
Topper. Though I think I might swap for the full side window version and mid rise...
315's on stockers.
Waiting on decal to show up. "Jack it up, fat chicks can't jump" I'm vain I'll admit it.
-
06ryan27
- 50_Posts

- Posts: 118
- Joined: Sat Nov 02, 2013 5:58 pm
- Model Year: 2007
- Location: Aiken, SC
Post
by 06ryan27 » Tue Oct 28, 2014 11:46 pm
Rockin the mall crawler black 20's and mud grapplers
Big A monster sticker in the back window
I also have a small stach of warn hand pull straps, I keep a fresh one on the hook when they start to fade
-
flattire
- 250_Posts

- Posts: 361
- Joined: Fri Jun 08, 2012 1:22 pm
Post
by flattire » Wed Oct 29, 2014 12:10 am
Does a cd with disco music count?
-
JBM Power Wagon
- 500_Posts

- Posts: 709
- Joined: Sun May 27, 2012 10:46 am
Post
by JBM Power Wagon » Wed Oct 29, 2014 9:35 am
I'm all about function so my somewhat unique mod is a Wilson cell phone booster. Just this summer we had to call 911 at a remote campground when we found an elderly gentlemen in distress. Without the cell phone booster we would have been on the mad hunt for a land line.
Loving my 3/4 ton version of my old Jeep TJ!!!!!
-
joshet89
- Posts: 38
- Joined: Mon Aug 18, 2014 2:35 pm
- Model Year: 2014
- Location: Wadsworth, Ohio
Post
by joshet89 » Wed Oct 29, 2014 1:34 pm
I powder coated my tow hooks bright red and really makes the front end of my 2013 pop! Just need to get the front a little muddier to hide the bugs

-
Attachments
-

-
TonkaPW
- 250_Posts

- Posts: 340
- Joined: Sun Sep 08, 2013 2:21 pm
- Model Year: 2012
- Location: Leesburg, VA
Post
by TonkaPW » Wed Oct 29, 2014 2:27 pm
I lifted my Wagon 2 inches and went to 35's on the stock rims. Also added the White Knuckle Rock rails.
2012 Power Wagon
White Knuckle Rock rails
2" lift
35" Duratracks
Thuren control arms
-
stubiePW
- 500_Posts

- Posts: 581
- Joined: Mon Nov 12, 2012 7:45 pm
Post
by stubiePW » Wed Nov 05, 2014 7:38 pm
I have Recon smoked LED tail lights, recon smoked cab lights, painted my read diff housing red, painted the hook the same color red, and added the Carli frint diff cover. Oh and line-x bed. Plus lots of pin striping and a nice dent to the rocker. Up next will be some sliders
-
ndawind
- Posts: 11
- Joined: Sat Jan 19, 2013 6:25 pm
Post
by ndawind » Wed Nov 12, 2014 6:10 pm
Removed graphics (still have hood sides to do), removed fender emblems, removed ram's head and graphic from tailgate and welded metal to remove stamped hole, bought non-chrome front grille and removed and filled ram's head, powder coated bumpers
-
Attachments
-

-

-

-
w2dodge
- 500_Posts

- Posts: 968
- Joined: Mon May 21, 2012 4:57 pm
- Location: nj..ny
Post
by w2dodge » Wed Nov 12, 2014 7:17 pm
nice….
-
06ryan27
- 50_Posts

- Posts: 118
- Joined: Sat Nov 02, 2013 5:58 pm
- Model Year: 2007
- Location: Aiken, SC
Post
by 06ryan27 » Thu Nov 13, 2014 12:50 pm
-
06wagon
- 250_Posts

- Posts: 424
- Joined: Sun Jul 01, 2012 2:29 pm
- Location: Wapakoneta, Oh
Post
by 06wagon » Thu Nov 13, 2014 2:57 pm
http://www.youtube.com/watch?v=XFLi9U-f0w0
Not my motor...... but mine will be close......
It'll turn a head or two...
2006 Power Wagon. "Stockish"
A few parts added and deleted to make it go 300' Getting Farther from Stock!!!
1974 Power Wagon..... Going to get a Gen 3 HEMI swap. Future tow rig for the 06.
2016 Power Wagon Laramie. Delmonico Red. 20x12 Predator II's with 33" toyo's. Firestone air bags. B&W gooseneck. More extras to come....
-
Stickman
- 500_Posts

- Posts: 829
- Joined: Mon Nov 18, 2013 12:02 am
- Model Year: 2012
- Location: Wayland, MO
Post
by Stickman » Fri Nov 14, 2014 4:50 am
ndawind wrote:Removed graphics (still have hood sides to do), removed fender emblems, removed ram's head and graphic from tailgate and welded metal to remove stamped hole, bought non-chrome front grille and removed and filled ram's head, powder coated bumpers
Looks clean. I was thinking about getting the black express badges for mine but I think that is just too much black for me after seeing yours. I like the blacked out look, but all that black with no graphics or anything is just too much.
-
ndawind
- Posts: 11
- Joined: Sat Jan 19, 2013 6:25 pm
Post
by ndawind » Fri Nov 14, 2014 6:27 am
Stickman wrote:ndawind wrote:Removed graphics (still have hood sides to do), removed fender emblems, removed ram's head and graphic from tailgate and welded metal to remove stamped hole, bought non-chrome front grille and removed and filled ram's head, powder coated bumpers
Looks clean. I was thinking about getting the black express badges for mine but I think that is just too much black for me after seeing yours. I like the blacked out look, but all that black with no graphics or anything is just too much.
Thanks. thought about black wheels too, I like them. I was going to buy a spray can of aerosolized plastic and put it on my wheels but after seeing how yours looked I changed my mind too. Glad we could help each other out!
-
2011RPW
- 250_Posts

- Posts: 278
- Joined: Thu Oct 24, 2013 9:22 pm
- Model Year: 2011
- Location: Harper, TX
Post
by 2011RPW » Fri Nov 14, 2014 10:53 am
I was going to post, then I remembered it says subtle.
2011
Thuren 3" Suspension, 37' Toyo R/T's, S&B, Flowmaster, Diablo Trinity, N-Fab steps (junk), 31" LED Light Bar, Replacement Bumpers, debadged.
-
Stickman
- 500_Posts

- Posts: 829
- Joined: Mon Nov 18, 2013 12:02 am
- Model Year: 2012
- Location: Wayland, MO
Post
by Stickman » Sat Nov 15, 2014 3:21 am
ndawind wrote:Stickman wrote:ndawind wrote:Removed graphics (still have hood sides to do), removed fender emblems, removed ram's head and graphic from tailgate and welded metal to remove stamped hole, bought non-chrome front grille and removed and filled ram's head, powder coated bumpers
Looks clean. I was thinking about getting the black express badges for mine but I think that is just too much black for me after seeing yours. I like the blacked out look, but all that black with no graphics or anything is just too much.
Thanks. thought about black wheels too, I like them. I was going to buy a spray can of aerosolized plastic and put it on my wheels but after seeing how yours looked I changed my mind too. Glad we could help each other out!
Lol, heck ya

-
kengray
- 50_Posts

- Posts: 51
- Joined: Mon Mar 30, 2015 12:31 am
- Model Year: 2014
Post
by kengray » Mon Apr 27, 2015 8:42 pm
I want to remove the graphics on my 2015 PW SLT. It looks pretty easy to do. I thought about taking it to a body shop, but I'm trying to save some money. I am just a little worried about damaging the paint. Can you give me any tips? Thanks
ndawind wrote:Removed graphics (still have hood sides to do), removed fender emblems, removed ram's head and graphic from tailgate and welded metal to remove stamped hole, bought non-chrome front grille and removed and filled ram's head, powder coated bumpers
-
adeluca73
- 2000_Posts

- Posts: 2173
- Joined: Mon May 19, 2014 11:56 pm
- Model Year: 2014
- Location: Mid-Michigan, MI
Post
by adeluca73 » Mon Apr 27, 2015 11:51 pm
They're fairly easy to remove, plenty of folks on here have done it. They are vinyl stickers, so gently lift a corner and start pulling.
SOLD : 2014 Ram PW SLT: (Flame Red) 1st year of the Best Gen
<Build Thread>
NEW : 2025 Ram PW SLT: (Flame Red) Last year of the Best Gen
Initial Mods:
- Yokohama Geolander A/T4 35/12.5R/17LT
- Baja Squadron PRO Fog Light Kit
- CJC Front Skid
- Air Dam Delete
- Carli Front Diff Cover
- Purple Cranium Spider Rear Diff Cover
- Detloff Rear Sway Bar Spacer kit
- LED Bed Lighting Kit
- RAM OEM Fr/Rear rubber Splash Guards
- Bulletpoint RAM powered magsafe phone mount
- Refurbished my old Diamondback HD
- New linex
- 42” tool bar & muti-clamps
- DB’s Strip LEDs auto on/off kit
- New style locking kit
- New lock bar hardware kit
- New style tie down cleats
- Garmin BT Power Switch Powering:
- Abel Electric Nanny KS
- BD S2 Pro x2 (Rear)
- KC Hi-lights LED puck lights in the engine bay
- Patton Fab Rear Light Mounts
- BD Squadron XL8100 Ditch Lights
- SDHQ Ditch Light Mounts
PILFERED FROM MY ‘14 PW:
- F-55 Flatlink
- Diamondback HD
- RAM OEM Sil Plates x4
- Swing Cases x2
- F-55 2.5” Rear Hitch Recovery Point
- Rear Seat mounted 3x long gun case & storage pouches
- Muddy waterproof rear seat blanket cover
-
HammerTime
- 50_Posts

- Posts: 110
- Joined: Wed Feb 05, 2014 1:46 am
- Model Year: 2017
- Location: Lakeside CA
Post
by HammerTime » Tue Apr 28, 2015 12:21 am
Have not done much but did replace my stock tires with 285/75/17 BFG KM2s and added the Aluminess Sliders. Oh and put American Flag and NRA stickers on the rear window...
Coming soon: Aftermarket bumpers front and rear...

2017 White/Black Power Wagon
-
kengray
- 50_Posts

- Posts: 51
- Joined: Mon Mar 30, 2015 12:31 am
- Model Year: 2014
Post
by kengray » Tue Apr 28, 2015 1:04 am
Thanks
ote="adeluca73"]They're fairly easy to remove, plenty of folks on here have done it. They are vinyl stickers, so gently lift a corner and start pulling.[/quote]
-
Black Pearl
- 50_Posts

- Posts: 195
- Joined: Wed Dec 31, 2014 8:28 am
- Model Year: 2013
Post
by Black Pearl » Tue Apr 28, 2015 9:27 am

- Smoke clearance lights, plasti dip grill with auto zone red pin stripe, removed 4x4 logo on rear side panel. painted center of wheels black, red valve stem caps