Snorkel install Question

If it's about Power Wagons, all generations, this is where it'll go. This is the original PWR Forum Power Wagon Technical Discussion Section. And this includes everything that doesn’t fit in any one of the other categories related to the truck goes here!
Post Reply
Montana Dan
Posts: 27
Joined: Fri Jun 01, 2012 7:44 pm

Snorkel install Question

Post by Montana Dan » Wed Jun 06, 2012 11:27 pm

Ive orderd my Airflow Snokel and it should be ariving any day now. Great but, :doh: I've realized its made for the stock air box. I have an A.E.M cold air intake. My question is, what should i do next? Soruce a stock 'box? any ideas?
'08 RC Power Wagon W/mods. Aka "the Trail Shuttle."
Top
User avatar
Powerwagonmark
50_Posts
50_Posts
Posts: 189
Joined: Fri May 25, 2012 3:56 pm
Model Year: 2008
Location: Ontario, Canada

Re: Snorkel install Question

Post by Powerwagonmark » Wed Jun 06, 2012 11:29 pm

What did you do with your stock box?? I'm sure you could find a stock box for cheap somewhere.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears

Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Top
RustyPW
2000_Posts
2000_Posts
Posts: 5550
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Snorkel install Question

Post by RustyPW » Thu Jun 07, 2012 5:37 am

I'm using a Airaid CAI with mine. I modded the Airaid box to fit with the snorkel. Didn't take much to do it.
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:
Top
Montana Dan
Posts: 27
Joined: Fri Jun 01, 2012 7:44 pm

Re: Snorkel install Question

Post by Montana Dan » Thu Jun 07, 2012 8:50 pm

LOL I posted this twice oops. Im not used to this site yet. :doh: I bought my PW used this way. I Im thinkin of finding just the stock air box to use as an sealed air filter box under the hood and modifing it to fit the cold air piping into it some how. But thats just a guess at the moment. hurry up UPS DUDE! :excited:
'08 RC Power Wagon W/mods. Aka "the Trail Shuttle."
Top
Fireman78
50_Posts
50_Posts
Posts: 154
Joined: Mon May 21, 2012 9:07 am
Location: Tijeras, NM USA

Re: Snorkel install Question

Post by Fireman78 » Thu Jun 07, 2012 9:52 pm

Welcome to the snorkle club! When you do the job, be SURE to measure right, take your time, and do the cutout template perfect. Dont do it outside during a blizzard like I did and f#%& stuff up. Just get a stock airbox somewhere, buy some asphalt roofing cement in a tube, some zinc rich primer,some lock tite, and a six pack and youll be fine. Just make sure you relax and take your time and measure right.
Enjoy this life, cause it's all we're getting.
Top
Montana Dan
Posts: 27
Joined: Fri Jun 01, 2012 7:44 pm

Re: Snorkel install Question

Post by Montana Dan » Thu Jun 07, 2012 11:23 pm

Fireman78 wrote:Welcome to the snorkle club! When you do the job, be SURE to measure right, take your time, and do the cutout template perfect. Dont do it outside during a blizzard like I did and f#%& stuff up. Just get a stock airbox somewhere, buy some asphalt roofing cement in a tube, some zinc rich primer,some lock tite, and a six pack and youll be fine. Just make sure you relax and take your time and measure right.
:cheers: Sixer check! Just waiting form the UPs man. And a big thanks for the heads up on how NOT to F this this up. I will fallow your advice. Its spring run off time here and thats when the "stream" crossings get really intresting :shock:
One of my favorite local trails has a few 'crossings that would compare to Fordyce creek in CA. I sank a Toyota riding 40's trying one crossing last year. :cheers:
'08 RC Power Wagon W/mods. Aka "the Trail Shuttle."
Top
User avatar
04Ram2500Hemi
2000_Posts
2000_Posts
Posts: 2212
Joined: Thu May 31, 2012 12:19 pm
Model Year: 2012
Location: Missoula, MT

Re: Snorkel install Question

Post by 04Ram2500Hemi » Fri Jun 08, 2012 9:54 am

I just threw out my whole stock air intake off of my 2004 HD Hemi 2 weeks ago. I figured I wouldn't need it anymore with the new truck. Now I'm wishing I would have held onto it.
Gone but Never Forgotten
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3
Top
BlkWgn
250_Posts
250_Posts
Posts: 291
Joined: Thu May 24, 2012 12:22 pm

Re: Snorkel install Question

Post by BlkWgn » Fri Jun 08, 2012 2:01 pm

As long as you take your time with the template it is not too bad. I have some photos and info from when i did mine. Should be in my build thread in my signature
My new photography site - BlkWgn Photography http://blkwgn.smugmug.com

2006 Dodge Power Wagon production number 44 - Mercenary Offroad Prototype Bumper - Toyo 35 MT - Caril Springs - Carli Track Bar - Thuren Overland Shocks - Carli Front Diff Guard - RockCrusher Rear Diff Guard - Airflow Snorkel - Locker Bypass - Leer shell w/Roof Rack and 125w Solar Panel - and an empty wallet
1979 Yamaha DT175 Enduro (For Sale)

Kilo Juliet Six Delta Zulu Zulu

EMR (Emergency Medical Responder) Certified via San Bernardino County Fire
San Antonio Heights C.E.R.T Founding Member
San Bernardino National Forest OHV Volunteer[/color]

Build Thread http://americanadventurist.com/Forum/sh ... agon-Build

American Adventurist - http://www.americanadventurist.com
Top
Montana Dan
Posts: 27
Joined: Fri Jun 01, 2012 7:44 pm

Re: Snorkel install Question

Post by Montana Dan » Fri Jun 08, 2012 5:40 pm

04Ram2500Hemi wrote:I just threw out my whole stock air intake off of my 2004 HD Hemi 2 weeks ago. I figured I wouldn't need it anymore with the new truck. Now I'm wishing I would have held onto it.
........DAM
'08 RC Power Wagon W/mods. Aka "the Trail Shuttle."
Top
RustyPW
2000_Posts
2000_Posts
Posts: 5550
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Snorkel install Question

Post by RustyPW » Tue Jun 12, 2012 2:44 am

Here's a few pic's of my set up. I'm using an Airaid MDX CAI.
Attachments
018.JPG
019.JPG
DSCN0973.JPG
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:
Top
Montana Dan
Posts: 27
Joined: Fri Jun 01, 2012 7:44 pm

Re: Snorkel install Question

Post by Montana Dan » Tue Jun 12, 2012 10:34 pm

Thanks Rusty. But my air box isnt as nice as yours. Its pretty open at the bottom. I will post picks when i do the offical install. Come on UPS guy hurry up!
'08 RC Power Wagon W/mods. Aka "the Trail Shuttle."
Top
Montana Dan
Posts: 27
Joined: Fri Jun 01, 2012 7:44 pm

Re: Snorkel install Question

Post by Montana Dan » Fri Jun 15, 2012 11:54 am

I should have a stock air box being shipped from a fellow PW owner as i type this :excited: Now its just a waiting game till all the parts get here :rockon: Hurry up UPSman! I have DEEP creeks to cross while they're still deep and fun :twisted: :cheers:
'08 RC Power Wagon W/mods. Aka "the Trail Shuttle."
Top
06powerwagon06
50_Posts
50_Posts
Posts: 87
Joined: Sat May 19, 2012 8:31 pm
Location: Ontario, Canada

Re: Snorkel install Question

Post by 06powerwagon06 » Fri Jun 15, 2012 3:36 pm

Just make sure you carry a couple spare pulley's with you. They really don't like being under water especially if its muddy!
'06 Black Power Wagon, Quad Cab, Heated Leather, 4" Boss Bars nerf bars, Locker Bypass, TPS Bypass, Smoked clearance lights, Tool Box, Recovery gear, Carli Front Diff Guard, Rockcrusher Rear Diff Cover, 60" Hi Lift Jack-Mounted in Tool Box, Bed Liner'd Front & Rear Bumpers, Rockers and Grill, "T" Steering Upgrade, DT ProFab Steering Brace, Kill Switch, 2-6" Aux. Lights Behind Grill, Back Up Lights, Wheel Well Liners, 315/70/17 Goodyear Wrangler Duratracs, Airflow Snorkel, Rock Rails fabbed by me, Borgeson Steering Shaft, etc..[/size]

Rausch Creek Spring '12
Top
User avatar
pdavey
500_Posts
500_Posts
Posts: 730
Joined: Sun May 20, 2012 7:43 pm
Location: Richmond, VA

Re: Snorkel install Question

Post by pdavey » Sat Jun 16, 2012 9:17 am

06powerwagon06 wrote:Just make sure you carry a couple spare pulley's with you. They really don't like being under water especially if its muddy!
true statement :) Get the idler pulley's from Advance they are metal and a lot better design. Also fluid filming them or using some type of water resistant lube will help as well.

Sent from my Transformer Prime TF201 using Tapatalk 2
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
  • Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
Other Mods:
  • Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
Suspension/Protection Mods:
  • Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
Style/Other Mods:
  • KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Top
Post Reply

Return to “Power Wagon Talk”