fuel sensor
fuel sensor
Any one tackle a faulty sending unit?...Fuel gauge in the cluster works fine when tested...(hold down mileage reset..while turning on an off 3 times with ignition key)..I'm hoping I dont have to drop the gas tank...
Re: fuel sensor
if its about the same procedure as a dakota then lifting the bed may be far easier. i did a dokata myself by lifting bed about 8in off the frame rails. was fairly easy job actually.
Re: fuel sensor
Yup. My usual shop unbolts the bed and slides it over a bit to get to the pump.
Other shops will drop the fuel tank out of the truck to replace the truck.
Shitty shops will wreck the fuel tank in the process.
Other shops will drop the fuel tank out of the truck to replace the truck.
Shitty shops will wreck the fuel tank in the process.

Re: fuel sensor
yep I figured that....pump works ..and i have less than a half tank.. most likely doing this alone...just might waste the gas idling every day ...and drop the tank
Re: fuel sensor
Slide the bed back... 6 bolts... need at least 3 strong dudes or chicks... pump is right behind the cab... took me about 1.5hrs to do fairly easy
2010 PW, 295/70-17 Mastercraft Courser MXT, Borla Exhaust, K&N CAI, Ported Throttle Body, Everything Else all factory
Re: fuel sensor
Absolutely move the bed rather than drop the tank
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: fuel sensor
all done... 1 of many things I gotta do...had shoulder surgery and a total hip replacement in the past year and half.. .
-
- 2000_Posts
- Posts: 5542
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: fuel sensor
Did it fix the problem?
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826


Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.

Re: fuel sensor
yes it did....thank god