Rausch Creek PW Winch Mob T-shirts
Moderator: AceMan
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Rausch Creek PW Winch Mob T-shirts
I'm working on a T-shirt design, as posted in the Rausch Creek GTG thread. Just a heads up, here are the possible designs. This will be a limited production for the group that went or anyone else that would like one.
- Attachments
-
- Above is Option #1 with a big yellow hook.
-
- Above is Option #2 with hook attached to frame mount.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
RustyPW
- 2000_Posts
- Posts: 5537
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Rausch Creek PW Winch Mob T-shirts
Ace. If you could make that shackel on #2, orange instead of black. Think you might have it. That would be my vote.
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Rausch Creek PW Winch Mob T-shirts
That's a great idea. I was contemplating a different color, but I wasn't sure which to go with. I first though gray, but that won't work with a gray shirt. I'll try to get a cleaned up color change posted.RustyPW wrote:Ace. If you could make that shackel on #2, orange instead of black. Think you might have it. That would be my vote.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Rausch Creek PW Winch Mob T-shirts
I like the first one it's simple and to the point.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Rausch Creek PW Winch Mob T-shirts
I will take 3 in xxxl or xxxxl if you make them that big
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
-
VA_Wagon Man
- 500_Posts
- Posts: 737
- Joined: Mon May 21, 2012 10:54 am
- Location: Virginia
Re: Rausch Creek PW Winch Mob T-shirts
I like the second one. I think it would look best on a dark gray shirt. I'll take one Medium Dark Gray. 
Long Gone:
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,
Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!
"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,
Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!
"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Rausch Creek PW Winch Mob T-shirts
Do you guys like the "June 2-3" part, or should it say," Spring 2012?"
Posted by a drunk Carrier Pigeon suffering from malnutrition forced by Borg ENIAC TRS-80 nanobots @2.4k baud.
Posted by a drunk Carrier Pigeon suffering from malnutrition forced by Borg ENIAC TRS-80 nanobots @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
Pit Slave
- Vendor
- Posts: 1486
- Joined: Thu May 17, 2012 11:12 am
- Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....
Re: Rausch Creek PW Winch Mob T-shirts
It should say "Spring Rally 2012 June 1-3"
Nothing's more dead than a horse in a glue bottle.
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826
I guess you could say I'm a bit off center.....
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826
I guess you could say I'm a bit off center.....
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Rausch Creek PW Winch Mob T-shirts
Good idea. I'll post an update shortly.
Posted by a drunk Carrier Pigeon suffering from malnutrition forced by Borg ENIAC TRS-80 nanobots @2.4k baud.
Posted by a drunk Carrier Pigeon suffering from malnutrition forced by Borg ENIAC TRS-80 nanobots @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Re: Rausch Creek PW Winch Mob T-shirts
I like the first one the best, but will go with whatever the group wants. Guess its time for a poll.
Sent from my Transformer Prime TF201 using Tapatalk 2
Sent from my Transformer Prime TF201 using Tapatalk 2
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Rausch Creek PW Winch Mob T-shirts
Pete, there's a poll in my store. Check the vendor section.
Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Re: Rausch Creek PW Winch Mob T-shirts
See it online. Wasn't visible in tapatalk.AceMan wrote:Pete, there's a poll in my store. Check the vendor section.
Posted by a malnourished, drunk Carrier Pigeon and Borg ENIAC TRS-80 nanobots @2.4k baud.
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Re: Rausch Creek PW Winch Mob T-shirts
Are there really only 5 votes submitted so far for these shirts? I'm hoping to get one before Summer is in full swing....I'll even be happy with the one I didn't vote for just to have a Winch Mob shirt! C'mon guys! Voting is supposed to be an important right to us Americans! Northern Bro's in Ontario.....I know you guys like to vote for the things you want, too...cast your votes!
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell
2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
2011 PW. AFE Full Metal Power Stage 2 CAI. Readylift T6 Billet leveling kit. Yakima Load Warrior bed rack on crossbars (reinforced). Hi-Lift w/ Baja-base, Powertank PT-10 w/ Monster Regulator, shovel, and axe mounted on bed rack. Radioshack CB. 5 x 35" Nitto Trail Grappler MTs on PW wheels. UWS truck bed box with tools and recovery gear. Bed-mounted Billet 4x4 Fuel and H2O Jerry cans w/carriers. Rausch Creek Limited Edition Modified Ranch Hand Grille Guard (currently undergoing radical surgery and modification). Carli front diff guard. Custom rock sliders and custom rear diff skid plate fabbed by Iron Pig Off Road.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Rausch Creek PW Winch Mob T-shirts
I'm sure once I finalize it, there will be some interest.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.