RAMala Anderson's "build"

Start your thread and show everyone your build out.
Post Reply
smoothoper8r5
Posts: 5
Joined: Sun Aug 28, 2022 11:46 pm

RAMala Anderson's "build"

Post by smoothoper8r5 » Sun Sep 04, 2022 1:31 pm

I put "build" in quotes because this isnt anything crazy, and some long term plans involved. Plus, a lot of this id just like to get some opinions on also.

So, i picked up a 22' Hydro blue pearl L3 recently. Snagged it at the local dealer, used (barely) with 4500 miles on it. The previous owner threw on a pretty nice bull bar with some riged lights and a bakflip bed cover, thanks dude. There were also some things he took with him, something in the grille and it looked like a spod controller (?) In the sunglass compartment. The lights are disconnected and foglights arent working either, so i guess he ripped some shit out in a hurry. But im gonna make the dealer handle that.

But my plans so far are to put some 37's under it first, on stock suspension, and the CJC raceline wheels. All that i hear about the stock suspension is that it could be improved, but its pretty damn good how it is, so im not in a hurry to change it yet. Then ill need to get rid of the nerf bars that are on it for some WK sliders, purple cranium diff guards, and abel components swaybar and locker bypass, somewhere in there ill need a controller for the lights i have, and BD ditch lights ill add and for other accessories im sure will come.

One question is guys with the level 3's how are yall setting up your interiors? Switches, controls, radios, etc. Or has anyone yet?

Let me know what yall think about the order im going in. Want to get wheeling asap, but make sure its protected. Image

Sent from my SM-S908U using Tapatalk


RustyPW
2000_Posts
2000_Posts
Posts: 5484
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: RAMala Anderson's

Post by RustyPW » Sun Sep 04, 2022 9:12 pm

Welcome to the forum. :mrgreen:

:winchmob:
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

User avatar
Mule007
500_Posts
500_Posts
Posts: 720
Joined: Mon May 16, 2016 9:27 pm
Location: Colton, Oregon

Re: RAMala Anderson's

Post by Mule007 » Mon Sep 05, 2022 7:47 am

Welcome to the forum,,, Enjoy 👍 !!!
:patriot:2005 Mineral Grey; QC- #0666: "Laramie", power heated Leather seats, tow mirrors, dual zones, Alpine 9 speaker surround sound, steering wheel cruise control, music & volume controls; remote start, 6 CD player, AC; dark charcoal silver interior.
Additions: Frame mounted .188 DOM 3" steel rock rails, low profile steps;1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR HD bed/rock panel coating; Red Ryder cab high fiberglass canopy; 2” Linex brush guard w/4-4” Halogen off road lights; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black fender flares; PW winch accessory kit/remote control.
Tools: hand tools, 60” Extreme High Lift; rigging; straps; shackles; F&R chains; (2ea) rear wheel well NATO 20 L narrow gas cans & 5# extinguishers
Updates: Jasper Remfgr’d 5.7 Hemi Engine; Open Range AT 35x12.5 x17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, y bar & bushing assemblies; fuel pump; A/C exhaust fan & compressor;1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180-amp alternator; Interstate 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks/HD steering damper; F&R locker motors,sensors/u joints; 3" Magna flow cat back rear exit dual exhausts; Performance Brake/slotted rotor/caliper/pads/brake lines

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 418
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: RAMala Anderson's

Post by SimonandSimonBeast » Mon Sep 05, 2022 6:05 pm

Welcome. Seems like you've done some research and are on tte right track.37s, sliders and diff guards are definitely first priorities. Maple Offroad is another option for the slider, but can't go wrong with either.
:rockon: :chug:

smoothoper8r5
Posts: 5
Joined: Sun Aug 28, 2022 11:46 pm

Re: RAMala Anderson's

Post by smoothoper8r5 » Tue Sep 06, 2022 11:35 pm

SimonandSimonBeast wrote:Welcome. Seems like you've done some research and are on tte right track.37s, sliders and diff guards are definitely first priorities. Maple Offroad is another option for the slider, but can't go wrong with either.
Yea, I've been educated pretty well by one of my friends who bought a 2018 wagon that has a lengthy build thread on here. Lol. Hes the reason I have a wagon now. Lol.
I just want to be able to wheel this pig asap, lol. But gotta make sure she's right so I don't have a oh sh*t moment. Lol. At least limit those chances.
I'll have time to do the other things I want after I got it protected lol.

Thanks for the input man Image

Sent from my SM-S908U using Tapatalk


RustyPW
2000_Posts
2000_Posts
Posts: 5484
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: RAMala Anderson's

Post by RustyPW » Wed Sep 07, 2022 9:40 pm

You will be surprised on what a stock PW can do.
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

Post Reply