RAMala Anderson's "build"

Start your thread and show everyone your build out.
Post Reply
smoothoper8r5
Posts: 5
Joined: Sun Aug 28, 2022 11:46 pm

RAMala Anderson's "build"

Post by smoothoper8r5 » Sun Sep 04, 2022 1:31 pm

I put "build" in quotes because this isnt anything crazy, and some long term plans involved. Plus, a lot of this id just like to get some opinions on also.

So, i picked up a 22' Hydro blue pearl L3 recently. Snagged it at the local dealer, used (barely) with 4500 miles on it. The previous owner threw on a pretty nice bull bar with some riged lights and a bakflip bed cover, thanks dude. There were also some things he took with him, something in the grille and it looked like a spod controller (?) In the sunglass compartment. The lights are disconnected and foglights arent working either, so i guess he ripped some shit out in a hurry. But im gonna make the dealer handle that.

But my plans so far are to put some 37's under it first, on stock suspension, and the CJC raceline wheels. All that i hear about the stock suspension is that it could be improved, but its pretty damn good how it is, so im not in a hurry to change it yet. Then ill need to get rid of the nerf bars that are on it for some WK sliders, purple cranium diff guards, and abel components swaybar and locker bypass, somewhere in there ill need a controller for the lights i have, and BD ditch lights ill add and for other accessories im sure will come.

One question is guys with the level 3's how are yall setting up your interiors? Switches, controls, radios, etc. Or has anyone yet?

Let me know what yall think about the order im going in. Want to get wheeling asap, but make sure its protected. Image

Sent from my SM-S908U using Tapatalk


RustyPW
2000_Posts
2000_Posts
Posts: 5539
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: RAMala Anderson's

Post by RustyPW » Sun Sep 04, 2022 9:12 pm

Welcome to the forum. :mrgreen:

:winchmob:
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

User avatar
Mule007
500_Posts
500_Posts
Posts: 762
Joined: Mon May 16, 2016 9:27 pm
Model Year: 2015
Location: Colton, Oregon

Re: RAMala Anderson's

Post by Mule007 » Mon Sep 05, 2022 7:47 am

Welcome to the forum,,, Enjoy 👍 !!!
:patriot: SOLD: Never forgotten: Mule - 2005 Power Wagon, “Laramie”
NEW: “Bear”: 2015 Ram 2500 Tradesman 4WD, Crew cab, 68K miles; 2nd Owner-Power steering, windows, brakes, Tip start, heated tow mirrors; Sirius, blue tooth, Alpine 6 speakers; 35% tinted windows, Black, diesel gray, silver interior; Systems: Driver Info Displays; TPMS, ESC; Power converter; AC; ERS controls on shifter. Anti theft system, vehicle immobilizer. Engine: 6.4L Hemi, Auto. HD 6-66RFE-6 speed transmission; 3.73:1 gears; 1 ton Hemi transmission oil cooler; 2-speed electric shift BW44-46 4WD shift on fly; Trans. skid plate. Axels: F-5,500 #; R-6,100#; Solid front, Anti- slip differential rear; Tow Pkg:: Rough Country 2.5” lift; Tekonsha Prodigy P2 trailer brake, HD Coil Springs, Bilstein B8 5100 shocks, WD hitch, F/R HD stabilizer bars; rear track bar; sway control; Tow Haul Mode, brake assist, Hill control;recalls; 5” oval SS steps; Brakes: Extreme Z36 Truck and Tow Drilled/Slotted F&R rotors & pads; Wheels: XD KMC235 Grenade Crawl bead-lock wheels;
Upgrades: CB; Uniden Pro 520XL; Tonneau: Extant Endure ALX cover; Alternator: HD Denso 180 amp; Battery: Interstate MTZ-AGM 94RH7 Premium 830CCA; Tires: Dean Back Country A/T2-35/1250R-18/12, MP3; Floor mats: Husky X-act contour; Muffler: FX catback #71416 SS after axle exit; Car Seat covers: Caterpillar Black/Grey front seat covers :patriot:

User avatar
SimonandSimonBeast
250_Posts
250_Posts
Posts: 423
Joined: Wed Nov 20, 2019 10:53 pm
Model Year: 2013
Location: Upper Salford, PA

Re: RAMala Anderson's

Post by SimonandSimonBeast » Mon Sep 05, 2022 6:05 pm

Welcome. Seems like you've done some research and are on tte right track.37s, sliders and diff guards are definitely first priorities. Maple Offroad is another option for the slider, but can't go wrong with either.
:rockon: :chug:

smoothoper8r5
Posts: 5
Joined: Sun Aug 28, 2022 11:46 pm

Re: RAMala Anderson's

Post by smoothoper8r5 » Tue Sep 06, 2022 11:35 pm

SimonandSimonBeast wrote:Welcome. Seems like you've done some research and are on tte right track.37s, sliders and diff guards are definitely first priorities. Maple Offroad is another option for the slider, but can't go wrong with either.
Yea, I've been educated pretty well by one of my friends who bought a 2018 wagon that has a lengthy build thread on here. Lol. Hes the reason I have a wagon now. Lol.
I just want to be able to wheel this pig asap, lol. But gotta make sure she's right so I don't have a oh sh*t moment. Lol. At least limit those chances.
I'll have time to do the other things I want after I got it protected lol.

Thanks for the input man Image

Sent from my SM-S908U using Tapatalk


RustyPW
2000_Posts
2000_Posts
Posts: 5539
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: RAMala Anderson's

Post by RustyPW » Wed Sep 07, 2022 9:40 pm

You will be surprised on what a stock PW can do.
PWOC #53
2008 POWER WAGON RC

My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826 :cash: :cash:

Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.

Russ
NRA - Benefactor, Golden Eagle. :lockedandloaded:

Post Reply