dual battery installation suggestions?

CBs / FRS / GMRS / MARS, radios, stereos, computers, tools, etc. The stuff you use to support wheeling or use of your PW.
Post Reply
bruinjay
Posts: 5
Joined: Sun Sep 22, 2019 4:12 pm
Model Year: 2019

dual battery installation suggestions?

Post by bruinjay » Thu Oct 03, 2019 10:44 pm

Can anyone who’s done this tell me where you mother the second battery, with what kit, and perhaps provide some pics or diagram? I would like to run the second battery in my new PW similar to how I had in my 4Runner for fridge/freezer.

Can’t imaging life without a truck fridge.

Appreciate your help!

bruinjay
Posts: 5
Joined: Sun Sep 22, 2019 4:12 pm
Model Year: 2019

Re: dual battery installation suggestions?

Post by bruinjay » Tue May 26, 2020 2:07 pm

Anyone? Thanks!

User avatar
Oilbrnr
50_Posts
50_Posts
Posts: 164
Joined: Tue May 02, 2017 7:26 pm
Model Year: 2016
Location: Flagstaff & Scottsdale, Arizona

Re: dual battery installation suggestions?

Post by Oilbrnr » Wed May 27, 2020 1:47 pm

Mine is mounted inside my Four Wheel Camper. But that doesn't help you much. 😁

Personally, if all you're running is a fridge, I would not worry about a second battery. There really isn't anywhere to put it unless you go underneath somewhere with a AGM.

Carry a good jump pack and set the disconnect voltage level high on the fridge (assuming you have a unit that you can do that).
'16 with '17 FWC

KevinABQ
250_Posts
250_Posts
Posts: 307
Joined: Thu Oct 19, 2017 4:32 pm
Model Year: 2018
Location: Albuquerque

Re: dual battery installation suggestions?

Post by KevinABQ » Wed May 27, 2020 11:27 pm

Under, between the frame rails, or in the bed in a dedicated box are the options I remember seeing.

There is a very expensive high capacity lithium replacement for the main battery that gets mixed reviews. But it’s like $900.
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.

Colibri
1000_Posts
1000_Posts
Posts: 1713
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: dual battery installation suggestions?

Post by Colibri » Wed Jun 03, 2020 12:58 am

Not sure on your generation, but on the third gen you could get the diesel battery box for the opposite side of the engine bay of your truck and bolt it in in place of the hemi air box. An intake system like the vararam solved the lack of air box issues nicely
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

Post Reply