I know we have all seen those cheap inclinometers around but what about the good ones??? Anyone know of an inclinometer that you could trust. I found a few but they are expensive if anyone knows of more please post.
http://www.leveldevelopments.com/PDF_Do ... ometer.pdf
http://www.innovatemotorsports.com/products/rad1.php
http://www.sibert.co.uk/consumables_inf ... 07&c_id=46
Inclinometers
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Inclinometers
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Inclinometers
If you have a stable mount, there are many iPhone and Android apps. Check the OT area for the Mobile apps thread.
2023 Power Wagon
Mods: 37" Open Country R/T Trail tires, Badlands Apex Predator 12,000lbs winch, LASFIT Truck Bed Mat
Previous Truck
2005 Dodge Power Wagon #9-05-0536
Mods: 37" Open Country R/T Trail tires, Badlands Apex Predator 12,000lbs winch, LASFIT Truck Bed Mat
Previous Truck
2005 Dodge Power Wagon #9-05-0536
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
I have looked at some inclinometer apps for the iphone but I am looking more fore something I can mount permenantly.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Inclinometers
Ahh. All I can speak to is the el cheapo one I originally put in my truck. It's ok, but not super accurate.
2023 Power Wagon
Mods: 37" Open Country R/T Trail tires, Badlands Apex Predator 12,000lbs winch, LASFIT Truck Bed Mat
Previous Truck
2005 Dodge Power Wagon #9-05-0536
Mods: 37" Open Country R/T Trail tires, Badlands Apex Predator 12,000lbs winch, LASFIT Truck Bed Mat
Previous Truck
2005 Dodge Power Wagon #9-05-0536
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
I have an El Cheapo but I don't really trust it for telling me when I'm going to flip over.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Re: Inclinometers
I have the 4x4 app on mine. Its not too bad but even with the mount it still jumps around some.. I still think I get nervous before it tells me I gotta worry! 
Sent from my C771 using Tapatalk 2
Sent from my C771 using Tapatalk 2
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
Anyone here have the RAD1???
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Inclinometers
I thought Russ has one?
Transmitted via Carrier Pigeon v2 & TRS-80 mobile @2.4k baud.
Transmitted via Carrier Pigeon v2 & TRS-80 mobile @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
RustyPW
- 2000_Posts
- Posts: 5575
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Inclinometers
No, I got an "el-cheapo" that I had to fix before I could use it.AceMan wrote:I thought Russ has one?
Transmitted via Carrier Pigeon v2 & TRS-80 mobile @2.4k baud.
It was one of those $19.00 jobbies with the two round gauges.PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14, '20, '22
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22, Summer '23, Summer '24,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
-
VA_Wagon Man
- 500_Posts
- Posts: 737
- Joined: Mon May 21, 2012 10:54 am
- Location: Virginia
Re: Inclinometers
I have one on my phone. In the deep ravine on trail 11, i was showing 28°. I think its pretty accurate and i zeroed it on a level area.
Sent from my DROID RAZR using Tapatalk 2
Sent from my DROID RAZR using Tapatalk 2
Long Gone:
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,
Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!
"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,
Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!
"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Inclinometers
Pictures or it didn't happen! LOL - just kidding. Besides, how would you be able to take a pic of it if the phone is in use? Oh wait a min, a screenshot!VA_Wagon Man wrote:I have one on my phone. In the deep ravine on trail 11, i was showing 28°. I think its pretty accurate and i zeroed it on a level area.
Sent from my DROID RAZR using Tapatalk 2
Seriously, that would have been cool to look at, a pic of what's in front of you with the inclinometer reading something off the wall.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Inclinometers
Oh yea, I remember that. You had pics of it at the other forum.RustyPW wrote:No, I got an "el-cheapo" that I had to fix before I could use it.AceMan wrote:I thought Russ has one?
Transmitted via Carrier Pigeon v2 & TRS-80 mobile @2.4k baud.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Re: Inclinometers
I'll try and post a pict. of mine (rad one) it is a perfect press fit in the cubby (not to be confused with a CHUBBY)...but I dont know if they are still on the market...I like to use mine to level my camping rig for the night...cuz on off camber hills it only scares me...as a second choice "Smitty Built" has an iphone inclinometer that is really nice.check it out...Ben
- Attachments
-
Ben CW3 2/10th AIR CAV FT ORD CA. (retired)
2006 Power Wagon-6spd, rear air bags, Diff Guards:Carli F. RockCrusher R., matching rim for spare tire, removed back seat for storage----I own the following: 2005 Hallmark pop-top Camper---1970 Scout 800 4x4 w/232ci 6cyl 4spd---2006 Yamaha XT225 Dual Sport---Pictures @ https://www.flickr.com/photos/powerwagon/collections
2006 Power Wagon-6spd, rear air bags, Diff Guards:Carli F. RockCrusher R., matching rim for spare tire, removed back seat for storage----I own the following: 2005 Hallmark pop-top Camper---1970 Scout 800 4x4 w/232ci 6cyl 4spd---2006 Yamaha XT225 Dual Sport---Pictures @ https://www.flickr.com/photos/powerwagon/collections
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
Wow that fits perfect in there looks almost factory.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Inclinometers
What does everyone think of this type of inclinometer from Landmeter (made for Landrover)?
http://www.bestofferbuy.com/mini-car-ve ... 36229.html
Or this one from an old Toyota, with altimeter?
http://www.ebay.com/itm/Toyota-Inclinom ... 18&vxp=mtr
Or this one?
http://www.global-accessories.net/4x4-p ... -tilt.html
http://www.bestofferbuy.com/mini-car-ve ... 36229.html
Or this one from an old Toyota, with altimeter?
http://www.ebay.com/itm/Toyota-Inclinom ... 18&vxp=mtr
Or this one?
http://www.global-accessories.net/4x4-p ... -tilt.html
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
Ace those are all El Cheapo's just dressed up a little.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Inclinometers
Hmm, glad I didn't order one. LOL!
Then what do we use??? A glass of water on the dashboard?
Then what do we use??? A glass of water on the dashboard?
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
This is a good one probably one of the most accurate but it's over $200 
http://www.leveldevelopments.com/PDF_Do ... ometer.pdf
http://www.leveldevelopments.com/PDF_Do ... ometer.pdf
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Inclinometers
That looks expensive! But it appears is highly accurate. That seems like it's meant for something requiring tighter tolerances precision.
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
Yup very accurate.AceMan wrote:That looks expensive! But it appears is highly accurate. That seems like it's meant for something requiring tighter tolerances precision.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
-
AceMan
- Site Admin
- Posts: 1546
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Inclinometers
Here's one, the old fashioned way - bubble based.
http://www.ebay.com/itm/Angle-Slope-Lev ... 256ffb60c9
http://www.ebay.com/itm/Angle-Slope-Lev ... 256ffb60c9
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Re: Inclinometers
I have the free apps for my android phone, but I still put two of these in my truck to have a way to know even if my phone died or got lost.
http://www.amazon.com/Company-201-F--ga ... 677&sr=8-1
http://www.suncompany.net/prodList.php?subCat=8
I mounted one to the dash and one on the passengers side B-pillar. Works fine for what I need and I purchased mine from a local camping store for about $9 each with tax. I stuck it on with the truck full of fuel, empty of gear and on level ground.
Because they are filled with fluid they are stable and accurate, as accurate as the phone app is anyway!
http://www.amazon.com/Company-201-F--ga ... 677&sr=8-1
http://www.suncompany.net/prodList.php?subCat=8
I mounted one to the dash and one on the passengers side B-pillar. Works fine for what I need and I purchased mine from a local camping store for about $9 each with tax. I stuck it on with the truck full of fuel, empty of gear and on level ground.
Because they are filled with fluid they are stable and accurate, as accurate as the phone app is anyway!
My build 2009 3G
http://forum.powerwagonregistry.org/vie ... =13&t=2305
Beginners reading list:
1) Quigley’s Anglo-American Establishment – 354 pages http://www.carrollquigley.net/pdf/the_a ... shment.pdf
2) Wall Street and the Bolshevik Revolution by Antony C. Sutton 165 pages https://www.voltairenet.org/IMG/pdf/Sut ... tion-5.pdf
3) Wall Street & the Rise of Hitler by Antony C. Sutton 148 pages https://www.voltairenet.org/IMG/pdf/Sut ... Hitler.pdf
4) Wall Street and FDR by Antony C. Sutton 177 pages http://sandiego.indymedia.org/media/2007/02/125049.pdf
5) Dishonest Money by Joseph Plummer 175 pages http://joeplummer.com/dishonest-money.html
6) None Dare Call it Conspiracy by Gary Allen 197 pages http://www.outpost-of-freedom.com/libra ... y_1971.pdf
David Rockefeller: Memoirs (The story of traitors)
http://www.devvy.com/pdf/2006_November/ ... rnment.pdf
http://forum.powerwagonregistry.org/vie ... =13&t=2305
Beginners reading list:
1) Quigley’s Anglo-American Establishment – 354 pages http://www.carrollquigley.net/pdf/the_a ... shment.pdf
2) Wall Street and the Bolshevik Revolution by Antony C. Sutton 165 pages https://www.voltairenet.org/IMG/pdf/Sut ... tion-5.pdf
3) Wall Street & the Rise of Hitler by Antony C. Sutton 148 pages https://www.voltairenet.org/IMG/pdf/Sut ... Hitler.pdf
4) Wall Street and FDR by Antony C. Sutton 177 pages http://sandiego.indymedia.org/media/2007/02/125049.pdf
5) Dishonest Money by Joseph Plummer 175 pages http://joeplummer.com/dishonest-money.html
6) None Dare Call it Conspiracy by Gary Allen 197 pages http://www.outpost-of-freedom.com/libra ... y_1971.pdf
David Rockefeller: Memoirs (The story of traitors)
http://www.devvy.com/pdf/2006_November/ ... rnment.pdf
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
WOW check this out Scroll down to the last pic 
http://www.crawlmagforum.com/forum/cont ... ve-got-one!
http://www.crawlmagforum.com/forum/cont ... ve-got-one!
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
-
Pit Slave
- Vendor
- Posts: 1486
- Joined: Thu May 17, 2012 11:12 am
- Location: Sandy, Utah.. Moab, Jersey, Space Station, Baja.....
Re: Inclinometers
NOW that is a sweet setup!Powerwagonmark wrote:WOW check this out Scroll down to the last pic
http://www.crawlmagforum.com/forum/cont ... ve-got-one!
Nothing's more dead than a horse in a glue bottle.
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826
I guess you could say I'm a bit off center.....
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.
John Adams - 1826
I guess you could say I'm a bit off center.....
-
Powerwagonmark
- 50_Posts
- Posts: 189
- Joined: Fri May 25, 2012 3:56 pm
- Model Year: 2008
- Location: Ontario, Canada
Re: Inclinometers
Pit Slave wrote:NOW that is a sweet setup!Powerwagonmark wrote:WOW check this out Scroll down to the last pic
http://www.crawlmagforum.com/forum/cont ... ve-got-one!
Hell ya!!... and it has intake air temp, battery temp, throttle position, time running, miles traveled.
2008 Dodge POWER WAGON
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.
Power Wagon= 12000lb Warn winch, Electronic Disconnecting Swaybar, Front and rear lockers, 4.56 gears
Upgrades= BDS 4" long arm lift, JBA Shorty headers, Custom MBRP Y-Pipe, MBRP Custom exhaust, Stainless Steel front and rear brake lines, Thuren Adjustable track bar with Fox Racing Steering Stabilizer, Thuren/Atlas custom leafs, Thuren 6" Coil Springs, Thuren Adjustable Shackles, Redhead steering box, Carli front diff guard, Airflow Snorkel, Vent Tubes Extended, Custom Rock Rails(made by me), Custom rear tube bumper(made by me), Rockcrusher rear diff guard, Bushwacker pocket flares, Trimmed fenders, DT Profab Steering Box Brace, Borgeson steering shaft, 1 Ton Tranny cooler, Mickey Thompson 17x9 Sidebiter Wheels, Pitbull Rockers 37x12.5x17, Road Armour front bumper trimmed for extra clearance with lightbar and 4 KC lights and 4 Piaa's, Procomp Explorer Lights mounted on backrack, Wireless winch remote, Tints, clear cab lights, WeatherTech Floor Mats, HighLift Jack, Tool box, RBP gas cover(piece of junk). Line-xed from head to toe. More straps, shackles and pulleys than I actually need.