Diff Temp video

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3259
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Diff Temp video

Post by olyelr » Thu Oct 04, 2018 2:37 pm

BoldAdventure wrote:
Thu Oct 04, 2018 10:20 am
This video series has been really informative.
Yes, I agree. Very neat to watch. I am really intrigued to see the results of the next episode, with actual diff temps for each scenario.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

RustyPW
2000_Posts
2000_Posts
Posts: 4247
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Diff Temp video

Post by RustyPW » Thu Oct 04, 2018 6:07 pm

I was wondering about my RockCrusher diff covers. Found some pictures when I installed them. I can see the higher fill hole. :shock: The inside shape is close the the factory. Just changed the fluids in both diffs back in June. 3 qts in the front and 6 qts in the rear. Thinking on taking some out.
Attachments
DSCN0541.JPG
DSCN0546.JPG
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

Longbomber
Posts: 6
Joined: Sat May 31, 2014 9:03 pm
Model Year: 2013

Re: Diff Temp video

Post by Longbomber » Sun Oct 07, 2018 12:16 am

I think you will see banks come out with a new cover, extra capacity and finned but with a windage tray inside to keep the oil flow directed along the ring gear.
Not much doubt that a finned cover reduces temps, but the flow of the oil could be much smoother.

TwinStick
2000_Posts
2000_Posts
Posts: 4148
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: Diff Temp video

Post by TwinStick » Sun Oct 07, 2018 12:49 am

First off, I think we all know that soon after, he will offer his solution to this age old issue.

Diff temp does seem to be more of an issue these days, because of the electronic lockers (and the plastic parts used in them that are exposed to the hot fluid) that are available these days, not just in Power Wagons either.

Second, I do enjoy his vids, but honestly, you still can't see how much oil is or is not being slung onto the pinion gear or its bearings. I would sure like someone to explain why there have been so many "pinion bearing failures due to lack of lubrication" if the factory fill level and diff cover is the "better/best way to go", because i am at a loss for any other explanation.

My rear locker issue was with the stock cover. If I would have had my Mag-Hytec on, no doubt that they would have blamed me/it & void the warranty.
Last edited by TwinStick on Sun Oct 07, 2018 10:55 am, edited 2 times in total.
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

TwinStick
2000_Posts
2000_Posts
Posts: 4148
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: Diff Temp video

Post by TwinStick » Sun Oct 07, 2018 12:51 am

Based on the videos so far, it seems that the only way to go would be an actual diff oil cooler with hoses & a electric pump.

And, doing that, in and of itself, presents another whole host of issues specifically for us Power Wagon owners.
1) If that pump fails, your f***ed, it runs every time the truck runs.
2) If the hoses get snagged on anything, your f***ed.
3) Where to mount if spare tire is in it's stock location ?
4) How do all those 90 degree bends in hose fittings affect oil flow ?
5) How much more oil do you need in the diff to keep the oil at the proper level while driving it down the road ?
6) Can the pump run dry with no issues ?---Like when slowly going down a long steep hill off-road ?
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

KevinABQ
50_Posts
50_Posts
Posts: 127
Joined: Thu Oct 19, 2017 4:32 pm
Model Year: 2018
Location: Albuquerque

Re: Diff Temp video

Post by KevinABQ » Wed Oct 10, 2018 10:03 pm

You could drive the pump off the ring gear. Not sure that is a good idea. but it's right there. The issue that a damaged hose/radiator empties the diff is a problem. But you can use SS piping vs hoses and can shield anything with careful design and enough metal. Whether it makes any sense to go to that effort is another question.
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline

User avatar
DamageWagon
Vendor
Vendor
Posts: 2027
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011

Re: Diff Temp video

Post by DamageWagon » Wed Oct 10, 2018 10:31 pm

I love these problems. The problem isn’t the problem, it’s the lack of a solution to a problem that doesn’t exist.

So now we can all mind fuck a solution until we give up and agree there isn’t a problem that needs solving. But Gale told us there wasn’t a solution... so we had to mind fuck it to find a solution to the lack of a problem.

lol

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3259
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Diff Temp video

Post by olyelr » Wed Oct 10, 2018 11:09 pm

Bahahahahaha.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

User avatar
Low_Sky
500_Posts
500_Posts
Posts: 794
Joined: Fri May 01, 2015 7:12 pm
Model Year: 2015
Location: Eagle River, Alaska

Re: Diff Temp video

Post by Low_Sky » Thu Oct 11, 2018 12:04 am

Looking for a diff oil cooler bypass for my 2015 PW, if anybody makes one.


Sent from my iPhone using Tapatalk
John
Alaska
2015 PW on 2.5" Thuren Kings
My build thread

User avatar
DamageWagon
Vendor
Vendor
Posts: 2027
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011

Re: Diff Temp video

Post by DamageWagon » Thu Oct 11, 2018 12:08 am

Low_Sky wrote:Looking for a diff oil cooler bypass for my 2015 PW, if anybody makes one.


Sent from my iPhone using Tapatalk
It’s right on the diff cover. Takes a 3/8” square drive.

TwinStick
2000_Posts
2000_Posts
Posts: 4148
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: Diff Temp video

Post by TwinStick » Sun Oct 14, 2018 3:57 pm

Maybe after this series, he will come out with some video's that say low gearing is just a waste of money too ?

https://www.youtube.com/watch?v=WrRBbh6-eGU

https://www.youtube.com/watch?v=kYWyJoV2o6U
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

User avatar
Retired BLM Rig
500_Posts
500_Posts
Posts: 648
Joined: Sun Jan 31, 2016 6:51 pm
Model Year: 2008
Location: San Clemente, Ca.

Re: Diff Temp video

Post by Retired BLM Rig » Sat Oct 20, 2018 11:56 pm

I did a fluid service on an old Chevy 12 bolt LSD this week and thanks to this video series by Banks, I couldn't help but notice the unique shape of the factory cover. It has a channel formed into it to help direct oil to the axle tubes, increasing lubrication to the axle shaft and carrier bearings. I've serviced a lot of diffs in my day, but never paid attention to this feature before.

12 Bolt Cover - 1.jpg
12 Bolt Cover - 2.jpg
12 Bolt Cover - 3.jpg
The arrows show the holes that receive the extra lube.
12 Bolt Cover - 4.jpg
Watching the flow in the parts washing tank.

User avatar
DamageWagon
Vendor
Vendor
Posts: 2027
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011

Re: Diff Temp video

Post by DamageWagon » Sun Oct 21, 2018 12:43 am

That’s unique!! Thanks for posting up dude

RustyPW
2000_Posts
2000_Posts
Posts: 4247
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Diff Temp video

Post by RustyPW » Sun Oct 21, 2018 12:52 am

DamageWagon wrote:
Sun Oct 21, 2018 12:43 am
That’s unique!! Thanks for posting up dude
2X!

As many of those I've worked on long ago. I never paid any attention to that. :lol:
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

Colibri
1000_Posts
1000_Posts
Posts: 1610
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: Diff Temp video

Post by Colibri » Mon Oct 22, 2018 11:32 pm

Never noticed that either, crazy!
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

TwinStick
2000_Posts
2000_Posts
Posts: 4148
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: Diff Temp video

Post by TwinStick » Wed Oct 24, 2018 9:58 pm

I don't think ours have anything like that ???
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

RustyPW
2000_Posts
2000_Posts
Posts: 4247
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Diff Temp video

Post by RustyPW » Thu Oct 25, 2018 6:56 pm

TwinStick wrote:
Wed Oct 24, 2018 9:58 pm
I don't think ours have anything like that ???
Look at 14 posts above this one. I posted pic's of the stock and Rock Crusher cover insides.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

TwinStick
2000_Posts
2000_Posts
Posts: 4148
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: Diff Temp video

Post by TwinStick » Thu Oct 25, 2018 7:10 pm

And ?????

I see the stock cover has a "channel" for the oil, but our diff housing/axle does not have any holes in it (see white arrows in post by retired BLM rig , pic #3) to redirect/help send oil to the axle tubes, which is what i meant when i said "I don't think ours have anything like that."

Does it ?
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

RustyPW
2000_Posts
2000_Posts
Posts: 4247
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Diff Temp video

Post by RustyPW » Thu Oct 25, 2018 8:30 pm

TwinStick wrote:
Thu Oct 25, 2018 7:10 pm
And ?????

I see the stock cover has a "channel" for the oil, but our diff housing/axle does not have any holes in it (see white arrows in post by retired BLM rig , pic #3) to redirect/help send oil to the axle tubes, which is what i meant when i said "I don't think ours have anything like that."

Does it ?
That's an old cheby 12 bolt that BLM posted. Different animal, from different times.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3259
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Diff Temp video

Post by olyelr » Thu Oct 25, 2018 9:46 pm

RustyPW wrote:
Thu Oct 25, 2018 8:30 pm
TwinStick wrote:
Thu Oct 25, 2018 7:10 pm
And ?????

I see the stock cover has a "channel" for the oil, but our diff housing/axle does not have any holes in it (see white arrows in post by retired BLM rig , pic #3) to redirect/help send oil to the axle tubes, which is what i meant when i said "I don't think ours have anything like that."

Does it ?
That's an old cheby 12 bolt that BLM posted. Different animal, from different times.
I think hes aware of that. He is wondering if our axles have that feature.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

TwinStick
2000_Posts
2000_Posts
Posts: 4148
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: Diff Temp video

Post by TwinStick » Fri Oct 26, 2018 12:14 am

olyelr wrote:
Thu Oct 25, 2018 9:46 pm
RustyPW wrote:
Thu Oct 25, 2018 8:30 pm
TwinStick wrote:
Thu Oct 25, 2018 7:10 pm
And ?????

I see the stock cover has a "channel" for the oil, but our diff housing/axle does not have any holes in it (see white arrows in post by retired BLM rig , pic #3) to redirect/help send oil to the axle tubes, which is what i meant when i said "I don't think ours have anything like that."

Does it ?
That's an old cheby 12 bolt that BLM posted. Different animal, from different times.
I think hes aware of that. He is wondering if our axles have that feature.
:idea: :idea: :idea: We have a winner ! LOL

I guess it might be true, what my wife says...........I must be speaking a different language sometimes. :lol: I can ask her---what I think---is a simple yes or no question, but she just can't answer like that. She has to give me this big long drawn out response, that makes me forget what my original question was, & somehow, it's all my fault !!! :rofl:
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

RustyPW
2000_Posts
2000_Posts
Posts: 4247
Joined: Thu May 24, 2012 4:23 pm
Model Year: 2008
Location: Brownsville Pa.

Re: Diff Temp video

Post by RustyPW » Tue Nov 13, 2018 11:00 pm

New video.
phpBB [video]

Clickable link for Tapatalk

PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.

Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member

TwinStick
2000_Posts
2000_Posts
Posts: 4148
Joined: Mon May 28, 2012 7:58 pm
Model Year: 2008

Re: Diff Temp video

Post by TwinStick » Wed Nov 14, 2018 2:54 am

And........there it is !!! His solution. Just send him your money. :lol:
In WNY State. 2008 Red QC PW G56. No lift yet, stock size tires. It pulls an 18' 2016 Starcraft AR One Extreme, 3500 lbs.
Load Pro 35 helper springs. 2015 A.R.E. MX Series custom cap. PCP front diff cover protector. Mag-Hytec 6 qt rear diff cover. K&N replacement air filter only. Dual grounded throttle body. Winch TPC bypass. Fab Four rear bumper. DURA BAK lined rocker protection. And a bunch of new front end stuff.

G-56 Gear ratios: 1st) 6.29:1 2nd) 3.48:1 3rd) 2.10:1 4th) 1.38:1 5th) 1.0:1 6th) 0.79:1 Rev 6.29:1 --- = 78.01613:1 Crawl Ratio
-------------------------5.94:1--------3.28:1-------1.98:1-------1.31:1-------1.0:1-------0.74:1-----5.42:1 ---- = 73.675:1
545RFE----------------3.0:1---------1.67:1--------1.0:1--------0.75:1-------0.67:1------------------3.0:1 -------=37.21:1

2013+ 32.47 crawl ratio...............Can you see the trend ??????????????

User avatar
BoldAdventure
Moderator
Moderator
Posts: 2140
Joined: Fri Mar 25, 2016 11:23 am
Model Year: 2015
Location: Nomadic
Contact:

Re: Diff Temp video

Post by BoldAdventure » Wed Nov 14, 2018 8:10 am

Brillant though, he just did an entire educational video series on why his product is superior and we all watched it.

That's even better marketing than AEV's "It's not a spacer lift kit video"
2015 Power Wagon Laramie - "ROCKLANDER"
[Build Thread] [Instagram] [Youtube]

User avatar
Reloaderguy
2000_Posts
2000_Posts
Posts: 2061
Joined: Tue Feb 09, 2016 8:06 am
Model Year: 2016
Location: Central Oregon

Re: Diff Temp video

Post by Reloaderguy » Wed Nov 14, 2018 8:40 am

Now let's see a comparison between his good ram air diff cover and the OE aluminum finned cover. It seems very strange that Gale spent so much time disproving the aftermarket covers but skipped the factory aluminum cooling cover.
Best Year Power Wagon

Post Reply