Power Wagon Picture Thread

Stuff that doesn't pertain to PWs and general chit-chat
Ramajama
50_Posts
50_Posts
Posts: 154
Joined: Sun Sep 25, 2016 4:35 pm

Re: Power Wagon Picture Thread

Post by Ramajama » Sat Aug 04, 2018 3:12 pm

Mule wrote:
Fri Aug 03, 2018 8:09 pm
Mmmmm dirt bikes. Wrong color though. :lol:
Image
I know! That orange is just wrong! :thppt: :lol:
2018 RAM 2500 Power Wagon :rockon:
2015 Land Rover Discovery Sport HSE Lux

User avatar
b40huckers
Posts: 8
Joined: Fri Sep 14, 2018 11:06 am
Model Year: 2017
Location: Great Falls

Re: Power Wagon Picture Thread

Post by b40huckers » Fri Sep 14, 2018 11:14 am

my 2017
Attachments
69BC74E7-45AE-41D6-969E-BBB115AA53BD.jpeg
C8BC70EC-1726-46C1-970D-B101AF1D22FB.jpeg
B00567EC-0884-4747-9553-884115E35854.jpeg
212C5EA2-9CDC-41A4-B6C5-0281647BB6BB.jpeg
H.D. Smith
2017 Power Wagon
2018 Charger Daytona
1999 GMC Suburban

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3019
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: Power Wagon Picture Thread

Post by olyelr » Fri Sep 14, 2018 1:13 pm

Lucky bum! I had to get rid of my JKUR for my Power Wagon. And I sure do miss it!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes :patriot:

User avatar
Mule
250_Posts
250_Posts
Posts: 386
Joined: Sat Nov 22, 2014 2:29 am
Location: Rocky Mtns
Contact:

Re: Power Wagon Picture Thread

Post by Mule » Sun Sep 16, 2018 9:00 pm

Drove the truck to the grocery store last wednesday. Truck sounded louder than usual. Got home, and sure enough, exhaust had fully separated right after the cats. Poked around under there and figured out what coupler/etc i'd need to do the repair. Need the truck this weekend.
My M18 grinder was still at the tool depot, being repaired under warranty, so I hopped on the moto and ran out to storage to grab my shitty old corded one. Ground down the welds, made some modifications to the coupler to get everything to fit over the parts I couldn't get the grinder to.
Go to put the clamps on thursday night, and one of the clamps is missing the nuts. Truck still inop.
Friday night, stop by Ace and pick up two flange nuts for the clamp. Get 'em on, do a fuel run, and quick run to home depot. Running well.
Going to have my buddy's shop (shop I actually trust) replace the slowly-leaking heater core, investigate why it overheats on a hard pull with a trailer (didn't used to get that warm with the same trailer behind it, so something's up), and while they've got it, i'll have them do a more permanent repair on the exhaust.
Image

Needed the pickup saturday for a tower decommissioning. Like climbing a wet noodle... everything came down fairly easily, but goddamn was it sketchy af over 40ft (of 60ft).
Image

May not be the most fuel-efficient vehicles, but damn they're handy to have. Old junk getting moved around.
Image

Saturday night, finish the prepwork for a bedliner. $80-ish DIY roll-on kit from autozone.
Image

Not super pumped about this stuff (Herculiner). First "primer" coat went on okay, but I feel like i'm going to need a lot more than the 1gal (and additional qt I bought just-in-case) that came with the kit. Like, a lot more.
Waiting on the first coat to cure right now, sun's going down... either finish out the material I have later tonight or tomorrow morning.
I feel like i'll have to buy another kit and throw on one or two more coats before it's sufficiently thick/durable. :angry:
Image

User avatar
Mule
250_Posts
250_Posts
Posts: 386
Joined: Sat Nov 22, 2014 2:29 am
Location: Rocky Mtns
Contact:

Re: Power Wagon Picture Thread

Post by Mule » Mon Sep 17, 2018 12:29 am

yeah this shit's still tacky. It's waiting till tomorrow morning. :(
Image

Post Reply