I'm at a Tipping Point. Do I spend a few grand to get this inspectable and drivable, or do I just trade it in for a new 2018.
2006 with 113k miles. My signature pretty much tells you what I have in it.
Currently, it needs:
Driver side lower Control arm
AC charge
I'm not exactly sure what it's worth. I'm entertaining any offers.
Thinking to sell or trade in my 2006
-
AceMan
- Site Admin
- Posts: 1469
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Thinking to sell or trade in my 2006
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
-
13powerwagon
- 50_Posts
- Posts: 54
- Joined: Thu Oct 17, 2013 4:58 pm
Re: Thinking to sell or trade in my 2006
Keep it, a little bit of money now to fix it is better than 6 grand a year for 5 or 6 years.
2013 tradesman
Thuren 2” coils, track bar and control arms, AEV salta wheels, stock size stt pros, white knuckle sliders, purple cranium dif covers, marathon superhide seat covers.
Thuren 2” coils, track bar and control arms, AEV salta wheels, stock size stt pros, white knuckle sliders, purple cranium dif covers, marathon superhide seat covers.
-
RustyPW
- 2000_Posts
- Posts: 4161
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Thinking to sell or trade in my 2006
Better up your 6 grand a year. Closer to 7 to 8.13powerwagon wrote: ↑Fri Aug 31, 2018 10:28 pmKeep it, a little bit of money now to fix it is better than 6 grand a year for 5 or 6 years.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
-
RustyPW
- 2000_Posts
- Posts: 4161
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Thinking to sell or trade in my 2006
RustyPW wrote: ↑Fri Aug 31, 2018 10:56 pmBetter up your 6 grand a year. Closer to 7 to 8. His trade in is about $15,,000 on a $60,000 plus PW.13powerwagon wrote: ↑Fri Aug 31, 2018 10:28 pmKeep it, a little bit of money now to fix it is better than 6 grand a year for 5 or 6 years.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
-
13powerwagon
- 50_Posts
- Posts: 54
- Joined: Thu Oct 17, 2013 4:58 pm
Re: Thinking to sell or trade in my 2006
Fair enough lol, they are rather proud of their trucks these days.
2013 tradesman
Thuren 2” coils, track bar and control arms, AEV salta wheels, stock size stt pros, white knuckle sliders, purple cranium dif covers, marathon superhide seat covers.
Thuren 2” coils, track bar and control arms, AEV salta wheels, stock size stt pros, white knuckle sliders, purple cranium dif covers, marathon superhide seat covers.
-
Reloaderguy
- 1000_Posts
- Posts: 1976
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Thinking to sell or trade in my 2006
AC isn't hard at all. Buy a vacuum and manifold from HF then you can do the AC as many times as you want.
Best Year Power Wagon
-
RustyPW
- 2000_Posts
- Posts: 4161
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Thinking to sell or trade in my 2006
He needs an evaporator.Reloaderguy wrote: ↑Fri Aug 31, 2018 11:53 pmAC isn't hard at all. Buy a vacuum and manifold from HF then you can do the AC as many times as you want.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
-
Reloaderguy
- 1000_Posts
- Posts: 1976
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Thinking to sell or trade in my 2006
It doesn't matter which parts you are replacing, if you crack open the AC you will need a vacuum pump and pressure manifold to charge the system. Instead of paying a shop a grand or more, buy the tools and do the job yourself.RustyPW wrote: ↑Sat Sep 01, 2018 12:07 amHe needs an evaporator.Reloaderguy wrote: ↑Fri Aug 31, 2018 11:53 pmAC isn't hard at all. Buy a vacuum and manifold from HF then you can do the AC as many times as you want.
Best Year Power Wagon
-
RustyPW
- 2000_Posts
- Posts: 4161
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Thinking to sell or trade in my 2006
That's not our Ace.Reloaderguy wrote: ↑Sat Sep 01, 2018 12:16 amIt doesn't matter which parts you are replacing, if you crack open the AC you will need a vacuum pump and pressure manifold to charge the system. Instead of paying a shop a grand or more, buy the tools and do the job yourself.RustyPW wrote: ↑Sat Sep 01, 2018 12:07 amHe needs an evaporator.Reloaderguy wrote: ↑Fri Aug 31, 2018 11:53 pmAC isn't hard at all. Buy a vacuum and manifold from HF then you can do the AC as many times as you want.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
-
RustyPW
- 2000_Posts
- Posts: 4161
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Thinking to sell or trade in my 2006
I got a text from Acey. He not getting a new PW. He's fixing his.
PWOC #53
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
2008 POWER WAGON RC
Mods to the PW; Nerffed Mopar RockRails, Wheel Well Liners, Bushwacker Pocket Fender Flairs, Garvmin dezl 560LMT GPS, Power Wagon Winch Kit, Line X Ultra Bed Liner, PIAA Headlight Bulbs, PIAA 580 Driving Lights (135 watt), PIAA 520 Fog Lights (135 watt), PIAA 520 ATP Off-Road Lights (135 watt), Locker Bypass, Modifed Rockcrusher Diff Covers, Mopar Utility Bed Rails and Tool Box, Warn Winch Wireless Remote Control, "el-cheapo" Inclinometer, Airaid CAI, Winch TPS Bypass, 35" Toyo's, Mopar Spare Tire Lock, 'T' Steering Linkage, Modifed PSC Steering Brace, P3 Brake Controller, Modifed Fusion "mall crawler" rear bumper , PIAA 1500 Back-Up Lights, 1Ton HEMI Tranny Cooler, Leer 100XR Bed Cap, Factory Tow Mirrors, CenterLine Rims 17x9-5.25 BS, Mag-Hytec Tranny Pan, AutoMeter Gauges, PSC Extreme Hydro Assist Steering, Carli G2 Track Bar, Carli Ball-Joints, Dynatrac FreeSpin Hubs, Snorkel, RCV Axles, EBC Pads & Rotors, Aluminess Front Bumper, 14,000 lb Pul-Pal, 60" Extreme Hi-lift Jack, and more riggin' equipment, Carli Long Travel Air Bags, Bilstein 7100 Shocks - Carli Valving, Carli Control Arms, Thuren 3" SoftRide Springs, Thuren Rear Shackles, MagnaFlow Muffler, Crown Stainless Brake Lines, MORE STUFF COMIN'.
Moab '10, '12, '14.
Rausch Creek Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18,
Russ NRA Benefactor Member
-
13powerwagon
- 50_Posts
- Posts: 54
- Joined: Thu Oct 17, 2013 4:58 pm
Re: Thinking to sell or trade in my 2006
Sweet 
2013 tradesman
Thuren 2” coils, track bar and control arms, AEV salta wheels, stock size stt pros, white knuckle sliders, purple cranium dif covers, marathon superhide seat covers.
Thuren 2” coils, track bar and control arms, AEV salta wheels, stock size stt pros, white knuckle sliders, purple cranium dif covers, marathon superhide seat covers.
-
AceMan
- Site Admin
- Posts: 1469
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Thinking to sell or trade in my 2006
Yea, you know I can't fix that shit!!! I wish I could. The whole dash has to come out. If the dealer time is 5.0, that equals to 2 weeks Ace time! LOLRustyPW wrote:That's not our Ace.Reloaderguy wrote: ↑Sat Sep 01, 2018 12:16 amIt doesn't matter which parts you are replacing, if you crack open the AC you will need a vacuum pump and pressure manifold to charge the system. Instead of paying a shop a grand or more, buy the tools and do the job yourself.
That's not even including the evaporator core and refrigerant.
Sent from my SM-G965U using Tapatalk
Did you ever notice that after Monday and Tuesday the calendar says "WTF"?
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
KB1ACE - Kilo-Bravo-One-Alpha-Charlie-Echo
Power Wagon Owner's Club #110
Black '06 PW QC
Auto, REC Nav/Sat UConnect, Reverse cam, MyGig v2 Lockpick, adj pedals, Tow mirrors, aftermarket heated seats.
Mods: Mopar Rock Rails, Carr steps (what's left of them), Toyo MT 35x12.5x17, Mopar 8.5 "T"-Linkage, Carli Trackbar (frameside 16mm bolt), King 2.5 Reservoir shocks, Carli Progressive coils, Carli Front Diff Protector, Rockcrusher rear diff, Carli Low Mount Damper, KC 55 watt rear floods w/Defiant bracket, RetroSolutions 12W LED rev & brake lights, EBC Slotted/Dimpled Rotors & Yellow Stuff Pads, 4th Gen Steering Box, Spicer axle U-joints, 4G DTProfab Steering brace ground 3/8" offset to fit my 3G 2006 with a 4G box.
Sitting in Garage: Ram SRT10 A-Pillar.
Re: Thinking to sell or trade in my 2006
If you make the trip to Texas I’ll fix it for you pro bono. I have a top of the line robinair ac machine and all necessary tools equipment and knowledge
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: Thinking to sell or trade in my 2006
Sounds like 1 heck of an offer 
2005 Mineral Gray PW; Alloquin 3" rock rails w/low profile steps; 2.5" Skyjacker suspension lift kit; Toyo Open Country AT II Extreme-35 x 12.5 x 17 10 ply's; McQuay-Norris Extreme ball joints; T-steering upgrade w/Bilstein 5100 steering damper; Bilstein 5100 Mono tube nitrogen gas shocks; Denso 180 amp alternator, Interstate Mega-tron 850 CCA HD battery; MoPar rear wheel well liners, black accent fender flares, remote start, and Ravelco Anti theft device; Hopkins Trailer Mate trailer brake controller; Hemi 1 ton transmission cooler; Uniden Bearcat Pro 68XL CB radio; Linex Platinum black armor truck bed & lower rock panel armor coating; Matching Range Rider cab high fiberglass canopy; 2" Linex (matches Alloquin) round brush guard light bar w/ 4- KC HiLites Rally 400 Series 4" Halogen Driving/off road lights; Dyna-flow cat back dual exhaust; GT Platinum srt-10 A-pillar pod mount programmable performance chip, monitor, tuner; an S&B CAI.
-
AceMan
- Site Admin
- Posts: 1469
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Thinking to sell or trade in my 2006
Thanks, Colibri, that is an awesome offer! Unfortunately, I won't be heading to Texas anytime soon. If you were closer, I'd be there tomorrow morning!
-
AceMan
- Site Admin
- Posts: 1469
- Joined: Tue May 22, 2012 11:27 am
- Model Year: 2006
- Location: Delaware County, PA
- Contact:
Re: Thinking to sell or trade in my 2006
I'll be keeping the truck. I got this far. I fear that once I change the arms, and fix the AC, that the engine will take a dump. It stalled on me today. LOL.
Just give me another year with it for some wheeling next year at Rausch, and get past my current financial obligations, for one, to pay off a whole house Generak 22kw generator I literally just ordered last week! Paying balance of $5k ($275/mo) for 18 months 0%. Tough deal to beat. That would hurt me with the truck payments!
Just give me another year with it for some wheeling next year at Rausch, and get past my current financial obligations, for one, to pay off a whole house Generak 22kw generator I literally just ordered last week! Paying balance of $5k ($275/mo) for 18 months 0%. Tough deal to beat. That would hurt me with the truck payments!