Hardwired Lockers with OEM Knob
Re: Hardwired Lockers with OEM Knob
so the hardwire switches can been done with only a code on the dash?
what about smart bar use while locking with switches, wouldnt the fault stop the disconnect
what about smart bar use while locking with switches, wouldnt the fault stop the disconnect
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
- Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Hardwired Lockers with OEM Knob
The Smartbar is not capable of being operated independently the way it is currently configured. You either have to live with the 18MPH limit, disconnect one of the links, or run a Thuren bar. The engine code should only appear when the lockers are engaged with the switches.
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Hardwired Lockers with OEM Knob
Actually >>> https://www.offroadevolution.com/produc ... ct-jk-jku/Reloaderguy wrote: ↑Fri Mar 16, 2018 11:59 amThe Smartbar is not capable of being operated independently the way it is currently configured. You either have to live with the 18MPH limit, disconnect one of the links, or run a Thuren bar. The engine code should only appear when the lockers are engaged with the switches.
It will work with ours, we've been discussing it. It just disengages the swaybar manually instead of the electrical plunger. What codes that will throw, well the one person with it (GTOMike) hasn't installed it yet. I'm probably going to pick it up myself, I'm curious about it.
I was going to run a homemade disconnect on front and rear for PWIM this year. Last year I saw a pretty good improvement running the rear disconnected as far as droop goes.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
- Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Hardwired Lockers with OEM Knob
I meant you can't operate the Smartbar independently using electronic overrides. With the manual plug it will throw a Service 4WD code. A member here (Will) has one. The reason I didn't buy one was because 1. I hate the stock SB spring rate 2. I don't want codes.
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: Hardwired Lockers with OEM Knob
I installed quick disconnects and separate locker switches for my JKUR. All the factory buttons still worked just fine... although I never did use them anymore once I installed the other switches and the disconnects. Still tempted to do that with my truck. If all I would get is a little dash light, well then so be it.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Hardwired Lockers with OEM Knob
Manual disconnect on the endlink is probably the best way to go. No codes.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
Re: Hardwired Lockers with OEM Knob
Exactly spot on reloaderguy, a stand alone system is easy, integrated oem controller is voodoo lol
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: Hardwired Lockers with OEM Knob
If you remove the smartbar module from the bar itself (3 bolts) and mount it out of the way, you can use the offroad evolution disconnect without throwing any code whatsoever
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: Hardwired Lockers with OEM Knob
Don't forget about this option for a pushbutton, air operated sway bar disconnect. However it does require OBA, but seems much more convenient than laying under your truck, screwing a knob in & out.
Like Colibri said:
Like Colibri said:
In Mikekey's situation, he'll always have a code or warning light due to damaged SmartBar module pins. I wonder if it would be possible to make a trip to the dealer and have them reprogram the CAN to ignore the final drive control module/SmartBar, resulting in no lights or codes? Then he could hardwire everything.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: Hardwired Lockers with OEM Knob
I wonder if it would be possible to make a trip to the dealer and have them reprogram the CAN to ignore the final drive control module/SmartBar, resulting in no lights or codes? Then he could hardwire everything.
What you just said there.........is LIGHTYEARS beyond 90+% of all dealers. Sorry, but that is the sad reality. I told my dealer it was probably the "rear locker assembly" that needed to be replaced..........they ended up saying "no, it was the rear locker actuator assembly that needed to be replaced !!!" Also, the ONLY thing the dealer will do as far as computers is, to reflash with an "authorized factory reflash." They will not even entertain anything else. All 3 dealers by me are of the same mindset.
What you just said there.........is LIGHTYEARS beyond 90+% of all dealers. Sorry, but that is the sad reality. I told my dealer it was probably the "rear locker assembly" that needed to be replaced..........they ended up saying "no, it was the rear locker actuator assembly that needed to be replaced !!!" Also, the ONLY thing the dealer will do as far as computers is, to reflash with an "authorized factory reflash." They will not even entertain anything else. All 3 dealers by me are of the same mindset.
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Hardwired Lockers with OEM Knob
I actually don’t have any codes. It’s as if if it’s simply dead as a door nail right now. Pretty odd.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
Re: Hardwired Lockers with OEM Knob
I actually drove around for a couple weeks with the smartbar connector unplugged and never threw a code or had any strange symptoms at all.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- Chromolykid
- 50_Posts
- Posts: 211
- Joined: Sun Oct 25, 2015 11:05 pm
- Model Year: 2014
- Location: Phelan, CA
- Contact:
Re: Hardwired Lockers with OEM Knob
I took a look at that Evo disco a while back, it’s not exactly in a convenient spot to fumble with. A lot of cacti around here, I’m not fond of crawling under my truck while out exploring. If somebody could figure out how to wire that disconnect with an electric motor to turn the knob that can be actuated from inside the cab with a toggle switch, you may have something. This plus a locker bypass and ABS circuit on a switch and you’ve pretty much de-nannified yourself! It’s a nice dream, but until then, I’ll keep pulling a link out to make my truck drive like a truck instead of a street car.
“Furiosa”
2016 Power Wagon
White Knuckle Sliders
Walker Evans Wheels in 35” BFG KM3’s
DOR Steering Brace
Thuren Stage 1 KING 2.5’s
Thuren Coils Front & Rear
Thuren Track Bars Front & Rear
Thuren King Steering Stabilizer
Dethloff Swaybar Spacers
Thuren Swaybar Links Front & Rear
AEV Procal
Carli Front Diff Guard/Purple Cranium Half Spider Rear
Putco LED Headlights & Foglights
Custom Fender Flares and Grill
2016 Power Wagon
White Knuckle Sliders
Walker Evans Wheels in 35” BFG KM3’s
DOR Steering Brace
Thuren Stage 1 KING 2.5’s
Thuren Coils Front & Rear
Thuren Track Bars Front & Rear
Thuren King Steering Stabilizer
Dethloff Swaybar Spacers
Thuren Swaybar Links Front & Rear
AEV Procal
Carli Front Diff Guard/Purple Cranium Half Spider Rear
Putco LED Headlights & Foglights
Custom Fender Flares and Grill
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Hardwired Lockers with OEM Knob
I am going to tackle this project next weekend. Decided this is the route I want to pursue. I'll be wiring in two switches to manually turn them on anytime I want.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: Hardwired Lockers with OEM Knob
Hell yea, I cant wait to see the write-up!!!!!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Hardwired Lockers with OEM Knob
I will probably add one. Been digging through this thread for awhile. First will be a working prototype, then I’ll order loom and stuff and do the final install.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
- nts007
- 2000_Posts
- Posts: 2284
- Joined: Wed Dec 11, 2013 10:01 pm
- Model Year: 2008
- Location: Sask, Canada, Earth
Re: Hardwired Lockers with OEM Knob
I did a cable actuation setup on a smart bar. Worked very well. Never got around to installing a lever in the cab but pulling the cable worked the same. I ended up just ditching the sway around all together later though
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: Hardwired Lockers with OEM Knob
I remember those cable acuated CAD kits for the old 2nd gen dodges. I bet some of the pieces from one of those kits could be utilized for the sway bar disconnect.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
Re: Hardwired Lockers with OEM Knob
It’s hard to beat air actuators for the smartbar. Evo mfg has a nice one for about $200.
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Hardwired Lockers with OEM Knob
I shouldn't be typing so late at night, LMAO. So next Saturday will be my big project day, buttoning up all the last minute stuff on the Power Wagon in prep for my "vacation" to Moab.
I'll be sure to document some stuff in time and try to get it up for anyone else. I've been looking over this thread and playing with my voltmeter. I think, maybe.... I might just be able to build a smart bar bypass using 5 relays a few resistors and still use the factory OEM knob. I might go ahead and do the manual rubicon disconnect too. With my high-clearance bumper, there is no crawling under my truck. I can bend over and touch my smart bar.
So for me, it'd just be a routine at the trailhead when I air down. And if I'm off the pavement, I'd prefer the damn thing disconnected all day anyhow.
I'll be sure to document some stuff in time and try to get it up for anyone else. I've been looking over this thread and playing with my voltmeter. I think, maybe.... I might just be able to build a smart bar bypass using 5 relays a few resistors and still use the factory OEM knob. I might go ahead and do the manual rubicon disconnect too. With my high-clearance bumper, there is no crawling under my truck. I can bend over and touch my smart bar.
So for me, it'd just be a routine at the trailhead when I air down. And if I'm off the pavement, I'd prefer the damn thing disconnected all day anyhow.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
- NovA ProspekT
- 50_Posts
- Posts: 165
- Joined: Tue Jan 05, 2016 11:53 am
- Model Year: 2007
- Location: New Hampshire - Live Free or Die
- Contact:
Re: Hardwired Lockers with OEM Knob
That'd be pimpin', if you can make it work.
( ͡° ͜ʖ ͡°)
2007 DODGE POWER WAGON: 5.7L Hemi V8/Auto, Quad Cab, Flame Red
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Hardwired Lockers with OEM Knob
Hey I have lost 41lbs recentlyNovA ProspekT wrote: ↑Sun Apr 01, 2018 3:51 pmThat'd be pimpin', if you can make it work.
( ͡° ͜ʖ ͡°)
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
Re: Hardwired Lockers with OEM Knob
again,
i will paypal you $1000 for a wire loomed harness that i can "plug and PLay" for use of lockers and smart bar disconnect with safety cover toggle switches.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Hardwired Lockers with OEM Knob
No thanks.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
Re: Hardwired Lockers with OEM Knob
hey you said it might be possible.
i guess ill leave you to it and see how it ends up.
thought i would leave it to the pros, i dont trust a single tech in my area to get this done....i know im not up to the task.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander