My ‘17 6.4 has this weird issue at around -10 c
If I use remote start at around this temp. The engine cranks longer than norm (about 3-4 secs) then stumbles and burps a few times then dies. Of course then remote start is cancelled. I have no issues when it’s warmer. And it starts great at -20 or below temps. Has anybody heard or had any issues with this as well?
6.4 Cold Start
-
- 50_Posts
- Posts: 86
- Joined: Thu Jan 26, 2017 9:42 pm
- Model Year: 2014
- Location: Rocky Mountains of British Columbia
6.4 Cold Start
ONE SHOT, ONE KILL, NO EXCEPTIONS
“ROCKY MOUNTAIN” TESTED
“ROCKY MOUNTAIN” TESTED
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: 6.4 Cold Start
I have never heard of anybody having issues like that. That is definitely odd. I have never even used my remote start
So your saying it works fine when it gets even colder?
So your saying it works fine when it gets even colder?
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
-
- 50_Posts
- Posts: 86
- Joined: Thu Jan 26, 2017 9:42 pm
- Model Year: 2014
- Location: Rocky Mountains of British Columbia
Re: 6.4 Cold Start
Ya. It’s starts fine when it’s colder. Just bumbles and farts when it’s around -10.
ONE SHOT, ONE KILL, NO EXCEPTIONS
“ROCKY MOUNTAIN” TESTED
“ROCKY MOUNTAIN” TESTED
- Bill2014
- 1000_Posts
- Posts: 1543
- Joined: Fri May 09, 2014 9:03 pm
- Model Year: 2014
- Location: Northern NY
Re: 6.4 Cold Start
Have the dealer re-flash it. Something is wrong with your fuel-air map.
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006