AlterEgo's Build - 2014 Power Wagon SLT
Re: My 2014 build
I have been thinking of chopping mine for a while. Thanks for the pics. It really looks good.
2012 Power Wagon
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels
- 2011TXPowerWagon
- 500_Posts
- Posts: 509
- Joined: Fri Aug 08, 2014 5:07 pm
- Model Year: 2011
- Location: Edinburg, Texas
Re: My 2014 build
Thats what I have been thinking about for a long time, just didnt have the guts (or tools) to do it. Looks pretty good.
"A government that robs Peter to pay Paul can always depend on the support of Paul."
-George Bernard Shaw
-George Bernard Shaw
Re: My 2014 build
All I used was the wrenches needed to remove the bumper and the fog light mounting brackets, and then a cut off wheel put on my angle grinder for the cutting.2011TXPowerWagon wrote:Thats what I have been thinking about for a long time, just didnt have the guts (or tools) to do it. Looks pretty good.
Sent from my iPhone using Tapatalk Pro
Re: My 2014 build
The skin is only $400...
2010 with 37" hooves, controlled by numerous Thuren parts and Thuren Custom King 2.5's (Moved to a new home)
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
viewtopic.php?f=13&t=2333
I only do what the majority of the 4 voices in my head tell me to. In most cases, I ignore two of them because one doesn't speak English, and I suspect the other is talking to someone else.
-
- 50_Posts
- Posts: 89
- Joined: Thu Aug 07, 2014 9:47 pm
Re: My 2014 build
Junk yard bumpers are even less (unless your talking the pw bumper is specific to pw's, I duno.Will wrote:The skin is only $400...
Sent from my iPhone using Tapatalk
2014 CCSB Tradesman 2500 -- G56 -- AEV dualsport -- AEV Katla -- 37x12.5r17 Toyo MT -- 315/70r17 Nokian Hakkapeliitta -- AEV bumper -- VisionX 6.7" light cannon -- Warn 16.5TI -- Mopar flares -- 8.4" Uconnect swap w/ customtronix jailbreak (front/rear/trailer cam) -- 3.73 gears w/ ARB front and rear -- Switch-Pros 8100
-
- 2000_Posts
- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Re: My 2014 build
Hey that truck in the back looks familiar... where are you mofo! Lol long time no see the edmonton crew wonders if you're still alive :p!AlterEgo wrote:Some old pics, but I never posted about putting on my White Knuckle Sliders, I was the first one to get them for the 4th Gen PowerWagon. I also am running B.A.D. Wheels now. The truck is currently in the shop getting 4.88's put in.
Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
-
- 2000_Posts
- Posts: 2970
- Joined: Wed Jan 16, 2013 6:55 pm
- Location: ontario canada
Re: My 2014 build
FYI bumper looks really good cut like that just needs some black bed liner and it will be mint!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
if guns kill people
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
pencils mispell words
cars make people drive drunk
and spoons made rosie o'donnel fat
"The one thing you realize when you aquire your trade standard is you realistically don't know Anything"
Re: My 2014 build
I intend to line-x it once I determine if I want to mount any lights on it or not.2wagons1driveway wrote:FYI bumper looks really good cut like that just needs some black bed liner and it will be mint!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk Pro
Re: My 2014 build
Alive, but got transferred to Chilliwack2wagons1driveway wrote:Hey that truck in the back looks familiar... where are you mofo! Lol long time no see the edmonton crew wonders if you're still alive :p!AlterEgo wrote:Some old pics, but I never posted about putting on my White Knuckle Sliders, I was the first one to get them for the 4th Gen PowerWagon. I also am running B.A.D. Wheels now. The truck is currently in the shop getting 4.88's put in.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk Pro
Re: My 2014 build
Finally got someone to build me a custom bumper. I am very happy with how it turned out.
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: My 2014 build
Nice and tight! Looks great!
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: My 2014 build
Sweet! Loooks good, like the profile & lines complement the truck & clearances; Congrats!!!
2005 Mineral Grey; QC- #0666: "Laramie", power heated Leather seats, tow mirrors, dual zones, Alpine 9 speaker surround sound, steering wheel cruise control, music & volume controls; remote start, 6 CD player, AC; dark charcoal silver interior.
Additions: Frame mounted .188 DOM 3" steel rock rails, low profile steps;1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR HD bed & rock panel coating; Red Ryder matching cab high fiberglass canopy; 2” Linex brush guard w/4-4” Halogen off road lights; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black fender flares; PW winch accessory kit/remote control.
Tools: hand tools, 60” Extreme High Lift; rigging; straps; shackles; F&R chains; (2ea) rear wheel well NATO 20 L narrow gas cans & 5# extinguishers
Updates: Jasper Remfgr’d 5.7 Hemi Engine; Open Range AT 35x12.5 x17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, y bar & bushing assemblies; fuel pump; A/C exhaust fan & compressor;1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180-amp alternator; Megatron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks/HD steering damper; F&R locker motors,sensors/u joints; 3" Magna flow cat back rear exit dual exhausts; Performance Brake/slotted rotor/caliper/pads
Additions: Frame mounted .188 DOM 3" steel rock rails, low profile steps;1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR HD bed & rock panel coating; Red Ryder matching cab high fiberglass canopy; 2” Linex brush guard w/4-4” Halogen off road lights; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black fender flares; PW winch accessory kit/remote control.
Tools: hand tools, 60” Extreme High Lift; rigging; straps; shackles; F&R chains; (2ea) rear wheel well NATO 20 L narrow gas cans & 5# extinguishers
Updates: Jasper Remfgr’d 5.7 Hemi Engine; Open Range AT 35x12.5 x17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, y bar & bushing assemblies; fuel pump; A/C exhaust fan & compressor;1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180-amp alternator; Megatron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks/HD steering damper; F&R locker motors,sensors/u joints; 3" Magna flow cat back rear exit dual exhausts; Performance Brake/slotted rotor/caliper/pads
- Bill2014
- 1000_Posts
- Posts: 1543
- Joined: Fri May 09, 2014 9:03 pm
- Model Year: 2014
- Location: Northern NY
Re: My 2014 build
I rarely like any of the custom fab bumpers - But that bumper looks AWESOME on your truck!!!
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Re: My 2014 build
how much...and can he make more...and with sensor holes? this is so perfect i cant stand it.
2018 Powerwagon-6.4 Hemi
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
Nanny kill switch and Locker Bypasses
Thuren Tuned King 3.0 & 2.5 Pintop Stage 3/2
17 Method NV-Toyo RT 37
Evo On-Demand Air Swaybar Disconnect
S&B Intake-Mufflex-Magnaflow/resonator delete
SPOD Bantam
On-Board air ARB CKMTA12
Baja design and Rigid Industries
Purple Cranium Spider dif guards
Pedal Commander
Re: My 2014 build
Here is the fabricators info. I am sure he could make any changes you needed.
- Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: My 2014 build
I might stop in and see what he can do.
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: My 2014 build
Man I really dig the overall look of that bumper. I dont really care for the aesthetics of the large rectangle opening for the winch cable, but I understand why it is there. Kudos!!!!!!
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
Re: My 2014 build
I now have my flip up licence plate holder in the middle covering the fairlead. Breaks it up better.
- Mr.Smith
- 1000_Posts
- Posts: 1131
- Joined: Wed Sep 04, 2013 6:36 pm
- Model Year: 2009
- Location: Fort Collins, CO.
Re: My 2014 build
That bumper looks PHUC’N GR8! Well done Sir!
Re: AlterEgo's Build - 2014 Power Wagon SLT
Thanks, it helps to have a fabricator that understands what you want.
- adeluca73
- 2000_Posts
- Posts: 2126
- Joined: Mon May 19, 2014 11:56 pm
- Model Year: 2014
- Location: The Pentagon, VA
Re: My 2014 build
Congrats on that new bumper. What's the weight, over 100lbs? Is it ½ or ¼ plate? Does it mount to the snow plow fangs or the tow hooks?
Re: AlterEgo's Build - 2014 Power Wagon SLT
It uses the top two factory mounting bolts on each side, and then two on each side in the tow hook mounting holes. It is 3/16" plate. Not sure about the weight, but 100lbs sounds about right.