Reloading Bench
-
- 2000_Posts
- Posts: 5440
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Reloading Bench
I'm remodeling the basement. So I had the chance to move my reloading bench from the garage to the basement. Have more room and all of my shooting stuff is in one spot. No more searching around the house now. Need to add another gun safe. I'm about out of room in the one I have now.
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
- nts007
- 2000_Posts
- Posts: 2284
- Joined: Wed Dec 11, 2013 10:01 pm
- Model Year: 2008
- Location: Sask, Canada, Earth
Re: Reloading Bench
Awesome!! Nice setup rusty!!
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more
- DamageWagon
- Vendor
- Posts: 2303
- Joined: Tue Oct 11, 2016 1:21 am
- Model Year: 2011
- Location: Portland, OR
- Contact:
Re: Reloading Bench
Holy cow that is awesome man!
Sent from my safe space
Sent from my safe space
Re: Reloading Bench
Green with envy am I.
2012 Power Wagon
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels
White Knuckle Sliders, myoung locker bypass, Thuren Track Bar, Thuren Control Arms, Toyo Open Country RT 37x12.50, Method Race Wheels
Re: Reloading Bench
Nice set up, but I did get a little dizzy looking at the flooring!
Preview
2005 white Q.C. Power Wagon #1716
AEM Brute Force intake
Gibson CAT back exhaust
Super Chips Flashpac Tuner
Wet Okole seat covers
35" Nitto Trail Grappler Tires
Line-X bed coating
Trac Rac Sliding Lumber Rack
Dual Batteries w/ Hellroaring Technologies Isolator/Combiner
Extreme Outback Magnum on board air compressor
H2 rims
2005 white Q.C. Power Wagon #1716
AEM Brute Force intake
Gibson CAT back exhaust
Super Chips Flashpac Tuner
Wet Okole seat covers
35" Nitto Trail Grappler Tires
Line-X bed coating
Trac Rac Sliding Lumber Rack
Dual Batteries w/ Hellroaring Technologies Isolator/Combiner
Extreme Outback Magnum on board air compressor
H2 rims
Re: Reloading Bench
awesome.....
- Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Reloading Bench
That's nice.
-
- 2000_Posts
- Posts: 5440
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Reloading Bench
The people who owned the house before me. Was a retired Army Colonel who taught ROTC at the local college years ago. He would have some of his underlings stay at the house. He would put them to work around the house. One of the things they did was the floor in the basement. The whole basement floor is done with old ceramic tile from leftover tile jobs. It's different to say. I believe it was done to cover up a bad concrete floor. The floor isn't flat in some spots.trk4sale wrote:Nice set up, but I did get a little dizzy looking at the flooring!
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
Re: Reloading Bench
That's a fantastic setup! Very inspirational
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol
Re: Reloading Bench
I have been using Dillon re-loaders for some time. Started with a 550B 20 years ago and it's still going strong. I'm using it for .45, .38. .222 Remington, and 6.5X55 Mauser. Last year I upgraded to a 650 for 9mm and .223 and have easily put out more than 20,000 rounds since Nov. mostly .223. Some friends and I started doing some casual tactical courses and it's really easy to blow through 500 rounds a day. It's all about volume, not necessarily sub MOA accuracy, but I can easily hit an 8" target at 50 yards while running a course.
Preview
2005 white Q.C. Power Wagon #1716
AEM Brute Force intake
Gibson CAT back exhaust
Super Chips Flashpac Tuner
Wet Okole seat covers
35" Nitto Trail Grappler Tires
Line-X bed coating
Trac Rac Sliding Lumber Rack
Dual Batteries w/ Hellroaring Technologies Isolator/Combiner
Extreme Outback Magnum on board air compressor
H2 rims
2005 white Q.C. Power Wagon #1716
AEM Brute Force intake
Gibson CAT back exhaust
Super Chips Flashpac Tuner
Wet Okole seat covers
35" Nitto Trail Grappler Tires
Line-X bed coating
Trac Rac Sliding Lumber Rack
Dual Batteries w/ Hellroaring Technologies Isolator/Combiner
Extreme Outback Magnum on board air compressor
H2 rims
- DamageWagon
- Vendor
- Posts: 2303
- Joined: Tue Oct 11, 2016 1:21 am
- Model Year: 2011
- Location: Portland, OR
- Contact:
Re: Reloading Bench
6.5 Mauser, do you have an old Swede?
Sent from my safe space
Sent from my safe space
-
- 2000_Posts
- Posts: 5440
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Reloading Bench
I have a 6.5x54 Mannlicher-Schoenauer and a 7mm Mauser Model 98.
I've looked into getting a Dillion press. Just never had the room for it.
I've looked into getting a Dillion press. Just never had the room for it.
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
- Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Reloading Bench
I moved to a XL650 from a turret press. I can casually load a thousand 9mm in three hours. I've used 550's before but have never owned one. I gave away my old Lee turret press and regret it, I'm thinking about buying a BL550. Unfortunately I'm stuck in the garage for another couple of years.trk4sale wrote:I have been using Dillon re-loaders for some time. Started with a 550B 20 years ago and it's still going strong. I'm using it for .45, .38. .222 Remington, and 6.5X55 Mauser. Last year I upgraded to a 650 for 9mm and .223 and have easily put out more than 20,000 rounds since Nov. mostly .223. Some friends and I started doing some casual tactical courses and it's really easy to blow through 500 rounds a day. It's all about volume, not necessarily sub MOA accuracy, but I can easily hit an 8" target at 50 yards while running a course.
Re: Reloading Bench
[quote="DamageWagon"]6.5 Mauser, do you have an old Swede?
Yes, it was "sporterized" (shortened barrel, turned down bolt, synthetic stock) by Kimber years ago when they were still in Oregon.
I had an FFL back then and could order guns and have them sent right to the house. No paperwork needed if the guns were for personal use.
Yes, it was "sporterized" (shortened barrel, turned down bolt, synthetic stock) by Kimber years ago when they were still in Oregon.
I had an FFL back then and could order guns and have them sent right to the house. No paperwork needed if the guns were for personal use.
Preview
2005 white Q.C. Power Wagon #1716
AEM Brute Force intake
Gibson CAT back exhaust
Super Chips Flashpac Tuner
Wet Okole seat covers
35" Nitto Trail Grappler Tires
Line-X bed coating
Trac Rac Sliding Lumber Rack
Dual Batteries w/ Hellroaring Technologies Isolator/Combiner
Extreme Outback Magnum on board air compressor
H2 rims
2005 white Q.C. Power Wagon #1716
AEM Brute Force intake
Gibson CAT back exhaust
Super Chips Flashpac Tuner
Wet Okole seat covers
35" Nitto Trail Grappler Tires
Line-X bed coating
Trac Rac Sliding Lumber Rack
Dual Batteries w/ Hellroaring Technologies Isolator/Combiner
Extreme Outback Magnum on board air compressor
H2 rims
-
- 2000_Posts
- Posts: 5440
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Reloading Bench
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
Re: Reloading Bench
Very nice set up Rusty !!
2005 Mineral Grey; QC- #0666: "Laramie", power heated Leather seats, tow mirrors, dual zones, Alpine 9 speaker surround sound, steering wheel cruise control, music & volume controls; remote start, 6 CD player, AC; dark charcoal silver interior.
Additions: Frame mounted .188 DOM 3" steel rock rails, low profile steps;1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR HD bed & rock panel coating; Red Ryder matching cab high fiberglass canopy; 2” Linex brush guard w/4-4” Halogen off road lights; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black fender flares; PW winch accessory kit/remote control.
Tools: hand tools, 60” Extreme High Lift; rigging; straps; shackles; F&R chains; (2ea) rear wheel well NATO 20 L narrow gas cans & 5# extinguishers
Updates: Jasper Remfgr’d 5.7 Hemi Engine; Open Range AT 35x12.5 x17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, y bar & bushing assemblies; fuel pump; A/C exhaust fan & compressor;1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180-amp alternator; Megatron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks/HD steering damper; F&R locker motors,sensors/u joints; 3" Magna flow cat back rear exit dual exhausts; Performance Brake/slotted rotor/caliper/pads
Additions: Frame mounted .188 DOM 3" steel rock rails, low profile steps;1.5” Skyjacker leveling kit; Bully Dog GT Platinum A-pillar mount programmable performance chip, monitor,& tuner; Linex Platinum OTR HD bed & rock panel coating; Red Ryder matching cab high fiberglass canopy; 2” Linex brush guard w/4-4” Halogen off road lights; Hopkins Trailer Mate brake controller; Bearcat Pro 68XL CB; Mopar black fender flares; PW winch accessory kit/remote control.
Tools: hand tools, 60” Extreme High Lift; rigging; straps; shackles; F&R chains; (2ea) rear wheel well NATO 20 L narrow gas cans & 5# extinguishers
Updates: Jasper Remfgr’d 5.7 Hemi Engine; Open Range AT 35x12.5 x17 MP3 10 ply E tires; Moog HD U/L front axle ball joints & wheel bearings; new link, sway, y bar & bushing assemblies; fuel pump; A/C exhaust fan & compressor;1 ton HEMI transmission cooler; OEM radiator; front pinion seal & bearing; Denso 180-amp alternator; Megatron 850 CCA HD battery; water pump, serpentine belt, Bilstein 2 5100 shocks/HD steering damper; F&R locker motors,sensors/u joints; 3" Magna flow cat back rear exit dual exhausts; Performance Brake/slotted rotor/caliper/pads