Frames
Frames
I keep reading here and there that the PW has a different frame, but I've also read where it has the same frame as the 2500HD.
Other than some holes and weldments for skid plates and such, what's the truth?
Other than some holes and weldments for skid plates and such, what's the truth?
2007 and 2019 Power Wagons
Re: Frames
Has to be generally the same frame. I would guess it would have a different part number due to some slightly different hole etc, but I bet either would work for either application with minor modifications. (2500 to Power Wagon). IE, I am sure a Cummins, G56, etc would be a bolt in, except for anything obvious (cutting the floorpan for the transmission shifter, winch interferes with intercooler).
Just a pure guess, but the economics wouldn't work for Daimler if they had to do a create new frame.
Just a pure guess, but the economics wouldn't work for Daimler if they had to do a create new frame.
2016 Laramie; 5.13s, Locker Bypass, WK sliders, 35" Toyo MT, 2Lo Kit, ProCal, Hemifever tune, Airbags/Cradles, Thuren 2.5" King w/ Boogie Bumps, Warn SDP6000
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: Frames
And, what would be the point of creating a new/different frame? They would essentially end up being the same in the end.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
- DamageWagon
- Vendor
- Posts: 2303
- Joined: Tue Oct 11, 2016 1:21 am
- Model Year: 2011
- Location: Portland, OR
- Contact:
Re: Frames
They are the same frame. You are correct, the only differences are maybe a few holes and skid plate mounts.
Sent from my safe space
Sent from my safe space
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Frames
I thought I read on this very site that it was the same, but had additional re-enforcement.
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
- Low_Sky
- 500_Posts
- Posts: 957
- Joined: Fri May 01, 2015 7:12 pm
- Model Year: 2015
- Location: Eagle River, Alaska
Re: Frames
A few different holes and weldments, but I'm sure the structural members are the same as for a normal Hemi or Cummins 2500 crew 6'4" box. For example, the front track bar frame side mount is different, and that is a weldment.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Reloaderguy
- 2000_Posts
- Posts: 2193
- Joined: Tue Feb 09, 2016 8:06 am
- Model Year: 2016
- Location: Central Oregon
Re: Frames
It's a half ton frame, that's why the capacity is so low.
- olyelr
- 2000_Posts
- Posts: 3658
- Joined: Sun Dec 07, 2014 9:00 pm
- Model Year: 2016
- Location: Kewadin, MI
Re: Frames
........
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM
- nts007
- 2000_Posts
- Posts: 2284
- Joined: Wed Dec 11, 2013 10:01 pm
- Model Year: 2008
- Location: Sask, Canada, Earth
Re: Frames
Frame was identical to the 2500 in all the 3rd gens. Had different part numbers for mounting points for additional protection and accessories. I have one in my yard here.
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more
-
- 2000_Posts
- Posts: 5440
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Frames
2Xnts007 wrote:Frame was identical to the 2500 in all the 3rd gens. Had different part numbers for mounting points for additional protection and accessories. I have one in my yard here.
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
- Bill2014
- 1000_Posts
- Posts: 1543
- Joined: Fri May 09, 2014 9:03 pm
- Model Year: 2014
- Location: Northern NY
Re: Frames
This is one of the pictures I took of the 2014 PW frame sticker when the truck was brand new...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2014 Power Wagon Laramie
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Titan V5 2.5" Receiver Pintle Hook
Warn wireless winch controller
.188" DOM White Knuckle Rock Sliders
Locker Bypass & Nanny Kill Switch
Moab 2006
Re: Frames
They are the same for all intents & purposes. But they used to have different part #'s technically speaking. Not sure on the 2017's. Like the others have said, same frame, just some added/different holes for all the Power Wagon goodies. No big mystery here.
- nts007
- 2000_Posts
- Posts: 2284
- Joined: Wed Dec 11, 2013 10:01 pm
- Model Year: 2008
- Location: Sask, Canada, Earth
Re: Frames
Chrysler is to cheap to actually make a different Frame for the pw. But they want you to think they did
08 ctd--mini max--thuren 3" coils and LT Leaves--4.56 gears and lockers in pw axles--some lights--afe intake system--bd super b turbo--Banks w/m Injection--Dynatrac Balljoints--king 2.5"s--37" Hankook Dynapro MT--DOR Long arms--Custom emf track bar--Manual T-case swap--Full PW Under armor--PSC Hydro Assist and so much more