2nd Chance PW

Start your thread and show everyone your build out.
User avatar
14PowerWaggy
50_Posts
50_Posts
Posts: 226
Joined: Fri Aug 22, 2014 11:56 am
Model Year: 2014
Location: Georgia

Re: 2nd Chance PW

Post by 14PowerWaggy » Tue Aug 16, 2016 12:20 pm

adeluca73 wrote:
RamGentry wrote:
Good luck eliminating fake shit on modern cars...vents that don't vent, spoilers the provide more lift than downforce etc.

Well if you look at the splash graphics they went with the window vinyls are right in place. At least there is the option to remove them. I love the look of Laramie PWs and would go that route if I had the coin. I don't even care about the leather interior I just like the clean painted flares and monochromatic look. That being said I still love my two tone but I think the less "busy" I make it look the better it gets.
I'm getting there as well. The only vinyl I have left is the window black. I'm not that overly offered by it & don't think it's all that big of a deal on or off. I looked at how it's wrapped, id guess it wouldn't be that big of a deal to remove if it starts bubbling or wrinkling.
the only reason it bothered me on mine was because it began to wrinkle at the bottom on both sides... I actually liked the look with it because I have dark tinted windows... I have new vinyl they gave me but for now I like the look just as good with it off...
2015 Granite Power Wagon... 37" Toyo MT's... Trail Ready wheels... Thuren Suspension... AEV ProCal

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Thu Aug 25, 2016 6:31 pm

Update:

Bought some alumness sliders from ram4roks! First choice was WK but this being a budget truck, the used slider market is virtually non existent, and these being about 1/3 of the price it was too hard for me to pass up. I'm pretty sure they wont be wheeled as hard or as often as Morgan so they should be up to the job. They were a little beat up but after refinishing I'm pretty happy with the results and the fiance loves the step. :rockon:

Clean 'em up:

Image

Sanding:

Image

Priming:

Image

Bedliner:

Image

Install:

Image

Glamor shot:

Image

I also did something out of character and bought a new part!

Image
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

Colibri
1000_Posts
1000_Posts
Posts: 1713
Joined: Mon Jun 08, 2015 5:44 pm
Model Year: 2009

Re: 2nd Chance PW

Post by Colibri » Thu Aug 25, 2016 6:51 pm

That'll tighten the front end up for sure. You did a really good job on the sliders, came out looking great!
Central Texas and Houston area
2009 5.7 auto quadcab
Carli 3” coils deaver leafs 3” kings with 4 tube bypass rear and fr/rr hydro bumps
Howe steering pump and gear with hydraulic ram assist
Custom tube bumpers and white knuckle sliders
Creative fab trussed axle. rem polished and cryoed 5.13 gears with arb lockers fr/rr
Sharadon stage 2 545rfe with 3000 stall edge converter
Lots of other stuff lol

TwinStick

Re: 2nd Chance PW

Post by TwinStick » Thu Aug 25, 2016 6:55 pm

Nice !

User avatar
adeluca73
2000_Posts
2000_Posts
Posts: 2126
Joined: Mon May 19, 2014 11:56 pm
Model Year: 2014
Location: The Pentagon, VA

Re: 2nd Chance PW

Post by adeluca73 » Thu Aug 25, 2016 11:43 pm

Looks great, congrats on the great budget find . Impressed again!!
2014 Ram PW SLT: 1st year of the Best Gen
<Build Thread>

User avatar
14PowerWaggy
50_Posts
50_Posts
Posts: 226
Joined: Fri Aug 22, 2014 11:56 am
Model Year: 2014
Location: Georgia

Re: 2nd Chance PW

Post by 14PowerWaggy » Fri Aug 26, 2016 10:00 am

You've done a great job on that truck... I'm impressed... Lookin great!
2015 Granite Power Wagon... 37" Toyo MT's... Trail Ready wheels... Thuren Suspension... AEV ProCal

Juday
500_Posts
500_Posts
Posts: 549
Joined: Fri May 25, 2012 7:51 am

Re: 2nd Chance PW

Post by Juday » Wed Aug 31, 2016 10:32 am

Looking great, man! Welcome to the Aluminess slider family, even if we are hated on here by some :D
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar


Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference

User avatar
RAM4ROKS
500_Posts
500_Posts
Posts: 975
Joined: Wed Jan 16, 2013 5:48 pm

Re: 2nd Chance PW

Post by RAM4ROKS » Fri Sep 02, 2016 11:31 am

They came out looking great!!!! Nice work! That truck is looking awesome!!!!!
:cheers:

User avatar
NovA ProspekT
50_Posts
50_Posts
Posts: 165
Joined: Tue Jan 05, 2016 11:53 am
Model Year: 2007
Location: New Hampshire - Live Free or Die
Contact:

Re: 2nd Chance PW

Post by NovA ProspekT » Sun Sep 04, 2016 2:09 am

I like the slida's, trucks looking great!

Now you need an Aluminess bumper...you know...just to match :D
2007 DODGE POWER WAGON: 5.7L Hemi V8/Auto, Quad Cab, Flame Red
- Spintech Super Pro Street 9000 Muffler, Electronic Exhaust Cutout, Transgo Shift-Kit
- COOPER S/T MAXX(37x12.5R17), Carli High Clearance Control Arms, Carli HD Ball-joints
- Aluminess Front Bumper, Back Rack w/ Side-rails, Truxedo LoPro QT Tonneau Cover
- JW Speaker TS4000 Driving Lights, Grote 30" LED Off-road Light Bar, Bosch Compact 100 Fog Lights
2004 JEEP GRAND CHEROKEE OVERLAND: 4.7L High Output PowerTech V8, Quadra-Drive, Inferno Red
- OME HD 1.5" Lift Coil Springs, Bilstein 5100 Shocks, JKS HD Trackbar, Core4x4 Tier4 Control Arms
- Nokian Hakkapeliitta 9 SUV(245/70R17) Winter Tires, 3" Exhaust w/ Magnaflow Cats/Y-Pipe & Muffler
- JW Speaker TS4000 Driving Lights, Hella 350 LED Wide Beam Light Bar
1998 JEEP GRAND CHEROKEE 5.9 LIMITED: 5.9L Magnum R/T V8, Quadra-Trac, Deep Slate Black
- H&R Sport Progressive Springs w/spacers(Stock height), Bilstein 4600 Shocks, OEM Euro Headlamps
- Doug Thorley Tri-Y Long-tube headers, MOPAR M1 Intake, BBK Power Plus twin 52mm Throttle Body
[My Flickr] - [Power Wagon Build Thread]
“The death-knell of the republic had rung as soon as the active power became lodged in the hands of those who sought, not to do justice to all citizens, rich and poor alike, but to stand for one special class and for its interests as opposed to the interests of others.” ~ Theodore Roosevelt

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Wed Sep 07, 2016 1:06 am

Juday wrote:Looking great, man! Welcome to the Aluminess slider family, even if we are hated on here by some :D
I'll be quite honest, WK was my first choice, but after installing these I have no doubt they will suit my needs perfectly. Very happy with the end results. :D
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Wed Sep 07, 2016 1:07 am

NovA ProspekT wrote:I like the slida's, trucks looking great!

Now you need an Aluminess bumper...you know...just to match :D
:cash:


this is a budget truck my friend, but if you find something on the used market you know who to call :wink:
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Wed Sep 07, 2016 1:08 am

RAM4ROKS wrote:They came out looking great!!!! Nice work! That truck is looking awesome!!!!!
:cheers:
:cheers: very happy it all worked out, thanks again!
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

Juday
500_Posts
500_Posts
Posts: 549
Joined: Fri May 25, 2012 7:51 am

Re: 2nd Chance PW

Post by Juday » Mon Sep 26, 2016 8:44 am

RamGentry wrote:
adeluca73 wrote:Looking good. Is that black grip tape on the door sills a 3M product? Mine's get pretty beat up with my hunting boots & uniform boots.
Sure is. Seems pretty dang tough and is not going to come off without a fight. I'll double check what the product is called after my shift but I know its 3m
Did you ever find out exactly what you used? I know mine looks like crap and I'd like to cover it up.
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar


Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Tue Feb 21, 2017 3:26 pm

Well I'm back! Had 4 months in Fort Benning for my OSUT infantry training. Now that thats over with I can get back to driving my baby! :winchmob:



Next up is a custom bed rack build to hold my RTT and keep my tonneau cover covering the bed. Should be a cool build with the help of a local shop guy. I'll post up some pics once it gets going.
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Wed Mar 01, 2017 11:16 am

Had this fabbed up this week :D The thing is stout... I brought a crappy hand drawn design and the guys @ Zeus offroad took it from there. Talked to Chad the owner, great guy, did the work himself and kept the budget truck on a budget. It has about 5" going into the stake holes and then 1/4 20 bolts bolted down into factory locations. To keep costs down I am coating it myself, going to use the same product I sprayed my bumper and rock rails with. Its heavy so it takes 2-3 guys to get it on/off. I am going to build a pulley/storage system in the garage (like a jeep top) to get it on and off in the future.

Image
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

User avatar
DamageWagon
Vendor
Vendor
Posts: 2303
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011
Location: Portland, OR
Contact:

Re: 2nd Chance PW

Post by DamageWagon » Wed Mar 01, 2017 11:39 am

Wow we have the same truck. Very cool man! That's simpler than mine was. I did the same thing and went way too heavy duty on the rack. I could take it off myself but it weighs about 180lbs. Way too much. Smoothed the ride out though lol

Good work keeping it on a budget!


Mine (currently for sale)
Image


Sent from my safe space

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Wed Mar 01, 2017 12:02 pm

Damn we do have very similar trucks! The two main things I wanted out of my rack is for the tent to stay under the roof line and I wanted it to be compatible with the tonneau cover. This way my gear can go in the bed and stay out of sight and dry. The way its configured it will actually stay just below the 3rd brake light and still allow the tonneau to roll all the way back. Its also wide and long enough that I'll be able to clamp on tools to the side, in front of, or behind the tent. I'm really excited to test it out this spring!
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

User avatar
DamageWagon
Vendor
Vendor
Posts: 2303
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011
Location: Portland, OR
Contact:

Re: 2nd Chance PW

Post by DamageWagon » Wed Mar 01, 2017 12:51 pm

Very cool, I like that you could use your tonneau. The low profile is nice too. Mine site below the roof but blocks the brake light.


Sent from my safe space

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3658
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: 2nd Chance PW

Post by olyelr » Wed Mar 01, 2017 11:07 pm

DamageWagon wrote:Wow we have the same truck....

Mine (currently for sale)
Image


Sent from my safe space

No no no, not quite... yours has the 4x4 off road package :lol:
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

User avatar
DamageWagon
Vendor
Vendor
Posts: 2303
Joined: Tue Oct 11, 2016 1:21 am
Model Year: 2011
Location: Portland, OR
Contact:

Re: 2nd Chance PW

Post by DamageWagon » Thu Mar 02, 2017 5:10 am

Aaaaah, I didn't notice. Gentry must have the 2wd Power Wagon model.


Sent from my safe space

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Thu Mar 02, 2017 4:58 pm

DamageWagon wrote:Aaaaah, I didn't notice. Gentry must have the 2wd Power Wagon model. Image


Sent from my safe space
Mall crawler wagon
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

Juday
500_Posts
500_Posts
Posts: 549
Joined: Fri May 25, 2012 7:51 am

Re: 2nd Chance PW

Post by Juday » Fri Mar 03, 2017 4:55 pm

olyelr wrote:
DamageWagon wrote:Wow we have the same truck....

Mine (currently for sale)
Image


Sent from my safe space

No no no, not quite... yours has the 4x4 off road package :lol:
Now that's funny right there!! :rofl:
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar


Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference

User avatar
olyelr
2000_Posts
2000_Posts
Posts: 3658
Joined: Sun Dec 07, 2014 9:00 pm
Model Year: 2016
Location: Kewadin, MI

Re: 2nd Chance PW

Post by olyelr » Sat Mar 04, 2017 10:09 am

In all seriousness, did some of the pw's come with those stickers? I guess i have never noticed them on one before.
2016 Ram Power Wagon Laramie - Granite Crystal Metallic - Ramboxes - 35” AT3W - TazerRAM

:patriot:

Juday
500_Posts
500_Posts
Posts: 549
Joined: Fri May 25, 2012 7:51 am

Re: 2nd Chance PW

Post by Juday » Tue Mar 07, 2017 10:41 am

olyelr wrote:In all seriousness, did some of the pw's come with those stickers? I guess i have never noticed them on one before.
To my knowledge, all Power Wagons came with the 4x4 Off Road decal that goes on the bed.
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar


Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference

User avatar
RamGentry
250_Posts
250_Posts
Posts: 296
Joined: Sun Oct 18, 2015 5:38 pm
Model Year: 2010

Re: 2nd Chance PW

Post by RamGentry » Tue Mar 07, 2017 2:05 pm

Juday wrote:
olyelr wrote:In all seriousness, did some of the pw's come with those stickers? I guess i have never noticed them on one before.
To my knowledge, all Power Wagons came with the 4x4 Off Road decal that goes on the bed.[/quote

Yep, they all came as part of the graphics package. I had them on my '10 along with the POWERWAGON on the hood. I debadged those as well as my hemi badge.
If I start listing Mods I would have to change the list daily
My build thread http://forum.powerwagonregistry.org/vie ... =13&t=3593

Post Reply