WTB 2005-2008 Power Wagon with Manual Transmission

JPR4LFE · Post by **JPR4LFE** » Wed Feb 15, 2017 11:45 am

Want to buy a 2005-2008 power wagon with a manual transmission. If you have one or know of one for sale please let me know.

JPR4LFE · Post by **JPR4LFE** » Wed Feb 15, 2017 11:58 am

Want to buy a 2005-2008 Power Wagon, Quad Cab, with a Manual Transmission. Please let me know if you have one or know of one that is for sale

TwinStick · Post by **TwinStick** » Thu Feb 16, 2017 1:04 pm

I see you made it here as well !

JPR4LFE · Post by **JPR4LFE** » Thu Feb 16, 2017 2:16 pm

I did indeed, I wanted to cover all my bases so I thought I would come to the source! Keep your eyes peeled!

06wagon · Post by **06wagon** » Thu Feb 16, 2017 4:48 pm

I have an 2006. Laramie quad cab. 66,xxx miles. no rust/dents

TwinStick · Post by **TwinStick** » Thu Feb 16, 2017 6:25 pm

06wagon wrote:I have an 2006. Laramie quad cab. 66,xxx miles. no rust/dents

And, it's got a G-56 manual trans !!!

JPR4LFE · Post by **JPR4LFE** » Thu Feb 16, 2017 6:35 pm

06wagon wrote:I have an 2006. Laramie quad cab. 66,xxx miles. no rust/dents

You have one, but is it for sale? If yes, details please (your profile says "stockish", please explain).

w2dodge · Post by **w2dodge** » Thu Feb 16, 2017 7:13 pm

dont know if this is available
http://www.2040-cars.com/Dodge/Ram-2500 ... l-1000604/

JPR4LFE · Post by **JPR4LFE** » Thu Feb 16, 2017 8:51 pm

w2dodge wrote:dont know if this is available
http://www.2040-cars.com/Dodge/Ram-2500 ... l-1000604/

I went to the dealers website and it's no longer listed

06wagon · Post by **06wagon** » Mon Feb 20, 2017 11:18 am

6.1 SRT8 swap, ported polished thitek heads.... ported/polished 6.1 intake manifold.... makes about 600-650hp at the crank. Still runs on pump gas. Custom clutch made by Trav's 4x4 to hold the power. 10.5 rear axle was swapped for a 11.5. And a lot of other stuff I'm forgetting... lol

vanished · Post by **vanished** » Mon Feb 20, 2017 1:12 pm

06wagon wrote:6.1 SRT8 swap, ported polished thitek heads.... ported/polished 6.1 intake manifold.... makes about 600-650hp at the crank. Still runs on pump gas. Custom clutch made by Trav's 4x4 to hold the power. 10.5 rear axle was swapped for a 11.5. And a lot of other stuff I'm forgetting... lol

"Stockish". LMAO

Sent from my iPhone using Tapatalk

JPR4LFE · Post by **JPR4LFE** » Mon Feb 20, 2017 2:54 pm

06wagon wrote:6.1 SRT8 swap, ported polished thitek heads.... ported/polished 6.1 intake manifold.... makes about 600-650hp at the crank. Still runs on pump gas. Custom clutch made by Trav's 4x4 to hold the power. 10.5 rear axle was swapped for a 11.5. And a lot of other stuff I'm forgetting... lol

Sounds awesome! BUT I am looking more for a Power Wagon closer to stock and less "stockish". Looking for reliability and usability, small camper pulling and horse trailer pulling as well as daily driver-type status, while still able to do long distance backcountry exploring/wheeling.

FirerescuePW · Post by **FirerescuePW** » Tue Feb 21, 2017 12:42 am

Oh, it'll pull your trailer, mister!

Sent from my SM-G935P using Tapatalk

06wagon · Post by **06wagon** » Wed Feb 22, 2017 3:07 pm

I could put a fresh 5.7 back in it.... I would require a deposit on that though...

JPR4LFE · Post by **JPR4LFE** » Thu Feb 23, 2017 12:10 am

It will indeed pull a trailer, I am sure of it! Thanks for the offer to swap out the motor for a fresh 5.7, but I am really looking for an unmodified truck. Good luck with the sale

JPR4LFE · Post by **JPR4LFE** » Mon Mar 27, 2017 4:40 pm

Bump to the top. The search continues

BlkWgn · Post by **BlkWgn** » Tue Mar 28, 2017 12:57 pm

just happened to see this on craigslist last night https://losangeles.craigslist.org/ant/c ... 63169.html

JPR4LFE · Post by **JPR4LFE** » Tue Mar 28, 2017 3:15 pm

BlkWgn wrote:just happened to see this on craigslist last night https://losangeles.craigslist.org/ant/c ... 63169.html

Thanks for the link! I have been in talks with him on that one, and he was going to try and sell it locally before we negotiated the price any more (there were some defects) and the deal has stalled out. I haven't been able to get a hold of him so he may have sold it...

MSCH2112 · Post by **MSCH2112** » Thu Mar 30, 2017 3:23 pm

http://www.kijiji.ca/v-cars-trucks/gran ... nFlag=true

buyer beware however!

mike

Jbostick · Post by **Jbostick** » Thu Mar 30, 2017 4:37 pm

That looks like the cummins swapped truck that was in diesel power several years ago

JPR4LFE · Post by **JPR4LFE** » Mon Apr 03, 2017 9:40 am

I had looked at 06 PW in Canada a couple months ago. Low miles, one owner, great exchange rate. But I could not get it across the border. Chrysler (unlike Ford or GM) will not write a letter of compliance for a Canada spec car to a US citizen. I went to an importer who could get it across if they held it at the border for 6 months for $600, but they could not import any Rams of that vintage because of the outstanding safety recall on the air bags, with no date set on when parts are to arrive. Because it's an outstanding safety issue, it is not allowed to be imported until it is resolved. That coupled with the speedometer being in Km/hr, I took Canada off of list of potential trucks for the moment. It may not be impossible to get a Canada spec Power Wagon across the border, but there are indeed some major obstacles!

JPR4LFE · Post by **JPR4LFE** » Thu Apr 06, 2017 4:01 pm

Sale Pending! I have located a 06' Power Wagon with a G56 Manual Trans in California. Vehicle has been inspected by a Dodge dealership, CarFax is clean. Conveniently the seller has a nephew that graduates high school about 20 minutes away from me and will be bringing the PW on a trailer Mid-May. Now the waiting game. Thanks for the help everyone!

TwinStick · Post by **TwinStick** » Thu Apr 06, 2017 6:38 pm

Glad you got you one !

Power Wagon Registry