Head Gasket
Re: Head Gasket
This is awesome! It will bring a whole new meaning to "Power" Wagon! Video of it running is a must!
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
Re: Head Gasket
Will it now technically be the More Power Wagon?
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Re: Head Gasket
pdavey wrote:Will it now technically be the More Power Wagon?
Sent from my SM-G935V using Tapatalk
*cue the Tim Allen man grunt*
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
Re: Head Gasket
New Cam.
Hope to get Humpty Dumpty back together again this weekend.
Sent from my SM-G935V using Tapatalk
Hope to get Humpty Dumpty back together again this weekend.
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
- TrueCowboy426
- 250_Posts
- Posts: 322
- Joined: Mon May 21, 2012 9:00 pm
- Location: Woodstock, ON Canada
Re: Head Gasket
Looking good. Hopefully you like the little increase in power the new bumpstick will give you. One nice thing about that cam is it is stock PCM friendly (at times I wish my cam was). Are you planning on just running the stock tune or are you going to get it custom tuned?
2007 Dodge Power Wagon - Inferno Red Quad Cab, G56, KRC 210X cam, SRT8 JGC seats, 35x12.50 Toyo MT's, Offroad lights behind the grill, Warn wireless winch remote, Carli front Diff Guard, Carli Long Travel Air Bags, On board air complete w/ train horns, homemade hidden gooseneck hitch, Homemade locker bypass, upgraded Mopar steering box, Centerforce clutch
1998 Dodge 2500 Laramie, QCSB 4x4. 24V cummins, completely rebuilt chassis with '01 1500 body installed, full gauges, Edge drag comp box, +150hp injectors, performance 47re built by me, 35" Toyo MTs on 3rd gen wheels.
2002 Dodge Ram 1500 ST 4x4 Quad Cab 4.7L Bright Silver, HO Cams, 12,000 lbs Winch mounted behind bumper, 4.56's, 2500 factory tow hooks, 35x12.50 Toyo MT's, Air-Lift Ride Control bags, homemade hidden ball gooseneck hitch.
1987 W100 - carburated 5.7 Hemi/727 combo, 35" Toyo MT's. Ramcharger D44 w/ warn hubs, Warlock seats, 2nd gen center console
1987 Dakota - RCSB, 413 big block, LT headers.
And a few jeeps for good measure.
1998 Dodge 2500 Laramie, QCSB 4x4. 24V cummins, completely rebuilt chassis with '01 1500 body installed, full gauges, Edge drag comp box, +150hp injectors, performance 47re built by me, 35" Toyo MTs on 3rd gen wheels.
2002 Dodge Ram 1500 ST 4x4 Quad Cab 4.7L Bright Silver, HO Cams, 12,000 lbs Winch mounted behind bumper, 4.56's, 2500 factory tow hooks, 35x12.50 Toyo MT's, Air-Lift Ride Control bags, homemade hidden ball gooseneck hitch.
1987 W100 - carburated 5.7 Hemi/727 combo, 35" Toyo MT's. Ramcharger D44 w/ warn hubs, Warlock seats, 2nd gen center console
1987 Dakota - RCSB, 413 big block, LT headers.
And a few jeeps for good measure.
Re: Head Gasket
I already got a custom tune from Arrington. They said it would run a little rough without it and all the other upgrades.
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Re: Head Gasket
Peter, were there any visual clues of the blown head gasket from the outside ? Like a carbon trail or build up.
2005 Power Wagon
Re: Head Gasket
Very slight. Always hard to tell with as dirty as everything gets off-roading.
I have to tell you on this journey I have learned so much about the pros and the cons about the hemi.
Lots to share if folks need to know something and eventually I will write it all up.
I have decided to pull piston 8 and replace the piston rings on it.
Reasons are quite simple. It had the coolant leak and it appears to have a small leak in it which I think is what is causing my oil to dissipate (I think called blow by).
Fun fun. Rest of the pistons seem to be in good shape.
Sent from my SM-G935V using Tapatalk
I have to tell you on this journey I have learned so much about the pros and the cons about the hemi.
Lots to share if folks need to know something and eventually I will write it all up.
I have decided to pull piston 8 and replace the piston rings on it.
Reasons are quite simple. It had the coolant leak and it appears to have a small leak in it which I think is what is causing my oil to dissipate (I think called blow by).
Fun fun. Rest of the pistons seem to be in good shape.
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Re: Head Gasket
Well this weekend has been a lot of wrenching and a Steelers game we won't talk about.
Made a ton of progress this weekend and hopefully will be starting up the truck on Tuesday.
Pulled piston 8 and put new rings on. Then had a ton of fun with my new exhaust header on the passenger side. Turns out the engine mount brace is larger on the 2003-2005 Rams so I modified it and now my passenger side header fits.
Driver side was a breeze. Here are some pics.
Sent from my SM-G935V using Tapatalk
Made a ton of progress this weekend and hopefully will be starting up the truck on Tuesday.
Pulled piston 8 and put new rings on. Then had a ton of fun with my new exhaust header on the passenger side. Turns out the engine mount brace is larger on the 2003-2005 Rams so I modified it and now my passenger side header fits.
Driver side was a breeze. Here are some pics.
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
- FirerescuePW
- 1000_Posts
- Posts: 1661
- Joined: Sun May 20, 2012 12:51 pm
- Location: North Wales, PA
Re: Head Gasket
Looks promising, Peter! Kudos for tackling this job on your own.
Wait, did I say tackling...?
Sent from my SM-G935P using Tapatalk
Wait, did I say tackling...?
Sent from my SM-G935P using Tapatalk
'05 Mineral Gray Power Wagon QC #1005
WINCH MOB PROUD!
SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
WINCH MOB PROUD!
SuperChips FlashPaq; DT ProFab Steering Brace; 08.5 Steering linkage (twice); Toyo Open Country M/T 35/12.50x17; Carli front diff guard; Rockcrusher rear diff cover; White Knuckle Offroad Rock Rails; Carli 3"coils, track bar, and High Clearance Control Arms; Carli King 2.5" Remote Resi Shocks; Reflex spray-in liner; Extang Trifecta tonneau cover; Pop Lock electric tailgate lock (OOS); Tekonsha Prodigy brake control; LEDS & Strobes & Siren; Winch TPS Bypass; Warn Wireless Remote; Dog hair, and a BIG Wish List!
Re: Head Gasket
Hahahahahahaha Mike. So the truck is back together and filled up with fluids. Now waiting on a new tune since the one they sent me was corrupted. Hopefully will be starting tomorrow.
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
-
- 2000_Posts
- Posts: 5439
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: Head Gasket
Nothing like "hurry up and wait".
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
Re: Head Gasket
Ok it has been a long day.
Got the new tune this AM so I figured I would install it and get through the startup/burn in process.
Got the truck to turn over but then it died and wouldn't restart as the battery was dead.
Charged the battery and got it started and it through a P0016 which is the two sensors monitoring the crankshaft and camshaft were off.
So I turned it off and took the front apart again. Bought a scope so I didn't have to take the head off and got everything reset (I swear I checked it 4 times before.)
Got the whole thing back together and just started it again.
No errors so that is good. The issue I am having is getting it to not stall below 1500 RPM. It feels like it isn't getting enough gas. Any thoughts on why?
Sent from my SM-G935V using Tapatalk
Got the new tune this AM so I figured I would install it and get through the startup/burn in process.
Got the truck to turn over but then it died and wouldn't restart as the battery was dead.
Charged the battery and got it started and it through a P0016 which is the two sensors monitoring the crankshaft and camshaft were off.
So I turned it off and took the front apart again. Bought a scope so I didn't have to take the head off and got everything reset (I swear I checked it 4 times before.)
Got the whole thing back together and just started it again.
No errors so that is good. The issue I am having is getting it to not stall below 1500 RPM. It feels like it isn't getting enough gas. Any thoughts on why?
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Re: Head Gasket
Ran it for 20 min. Would take it for a drive but can't get it to idle so I can put it in gear
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: Head Gasket
Maybe a vacuum leak somewhere? Brake booster hose?
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: Head Gasket
My guess would be vacuum leak....
Re: Head Gasket
Thanks guys. Will be troubleshooting the issue. Definitely something going on
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Re: Head Gasket
The vacuum hoses look fine. Could it be the throttle body without it throwing an error? I cleaned the MAP sensor as well.
I am truly stumped here.
Sent from my SM-G935V using Tapatalk
I am truly stumped here.
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Re: Head Gasket
Update. I narrowed it down to likely the PCV valve. I got it out and it was all gummed up. The Air Intake Manifold in general is pretty dirty and there is really no way to clean it.
I hit a hiccup though. After cleaning the PVC valve it broke while putting it back in the manifold.
Long story short I have ordered another manifold and new PCV valve.
The rest of the vacuum system seems to be good. All the vacuum lines are in good shape.
Let me know if folks think of anything else but I am pretty sure that is the culprit.
Sent from my SM-G935V using Tapatalk
I hit a hiccup though. After cleaning the PVC valve it broke while putting it back in the manifold.
Long story short I have ordered another manifold and new PCV valve.
The rest of the vacuum system seems to be good. All the vacuum lines are in good shape.
Let me know if folks think of anything else but I am pretty sure that is the culprit.
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
- coder
- 1000_Posts
- Posts: 1347
- Joined: Wed Jun 06, 2012 5:18 pm
- Model Year: 2007
- Location: Trabuco Canyon, CA
Re: Head Gasket
MAP sensor possibly?pdavey wrote:Update. I narrowed it down to likely the PCV valve. I got it out and it was all gummed up. The Air Intake Manifold in general is pretty dirty and there is really no way to clean it.
I hit a hiccup though. After cleaning the PVC valve it broke while putting it back in the manifold.
Long story short I have ordered another manifold and new PCV valve.
The rest of the vacuum system seems to be good. All the vacuum lines are in good shape.
Let me know if folks think of anything else but I am pretty sure that is the culprit.
Sent from my SM-G935V using Tapatalk
Vehicle: 2007 Power Wagon Quad Cab - Factory Options (Inferno Red, Premium Cloth Bench Seat, Light Group, Automatic Transmission, Leather Steering Wheel)
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
Re: Head Gasket
Took that out and it wasn't bad. Cleaned it, but likely will just get a new one as well. Might as well make the whole top of the engine new
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
Re: Head Gasket
How & what did you clean it with ? I have read that certain things, like brake cleaner, will mess them up. I have no first hand knowledge of this though. I have used brake cleaner to clean O2 sensors, sand them shiny & reinstall & never had an issue.
Re: Head Gasket
Quick update, I changed out the intake manifold and the MAP sensor to no avail. It may be the throttle body.
I sent off a data capture to the tuner to help troubleshoot.
Hopefully will be able to narrow it down soon.
Sent from my SM-G935V using Tapatalk
I sent off a data capture to the tuner to help troubleshoot.
Hopefully will be able to narrow it down soon.
Sent from my SM-G935V using Tapatalk
2005 Dodge Power Wagon QC Black - "Laramie"
Performance Mods:
Performance Mods:
- Comp 260 Camshaft, Upgraded Valve Springs, Forged Push Rods, JBA Shorties, Airaid Cold Air Intake, Gibson Dual Cat Exhast (Side Swept), National Speed Custom Tune
- Kenwood KVT-719 w/ Garmin Navigation and Kenwood Rear Camera, JL Stealth Sub
- Carli Upper "Bomb Proof" Ball Joints, NAPA Lower Ball Joints, Thuren Adj Track Bar, Thuren Adjusted Fox Damper, T-Style Steering Upgrade, New Power Steering Pump, 2012 Power Steering Motor Upgrade, Thuren King 2.5 Custom Rear Shocks -Stage 1, Thuren Off-set Control Arms, Thuren King 2.5 Custom Front Shocks -Stage 2, 35x12.50x17 Nitto Trail Grappler (previous tires Cooper STT), Carli Front Dif Gard,
- KC LightBar Behind Tow Hooks Mount, 2 KC Slim Driving Lights, 2 KC Offroading Lights, Weatherguard Black Steel Truck Box, Winch TPS bypass, Warn Wireless Winch Module
- TrueCowboy426
- 250_Posts
- Posts: 322
- Joined: Mon May 21, 2012 9:00 pm
- Location: Woodstock, ON Canada
Re: Head Gasket
I'm sure you have already tried this, but have you tried running the truck on the stock tune or even reloading the tune once you had the battery charged? If the battery was low when you installed the tune it could have gotten corrupted (common problem).
I would put a battery charger on the truck, reinstall the stock tune and see if it will run. Your setup isn't radical enough that you will have any drivability issues on stock tune. If that works, then put your custom one back in and try again.
Other than that just the obvious stuff to check, grounds, fuel pressure, vacuum leaks etc. A lot of people forget about the ground on the back of the head.
I would put a battery charger on the truck, reinstall the stock tune and see if it will run. Your setup isn't radical enough that you will have any drivability issues on stock tune. If that works, then put your custom one back in and try again.
Other than that just the obvious stuff to check, grounds, fuel pressure, vacuum leaks etc. A lot of people forget about the ground on the back of the head.
2007 Dodge Power Wagon - Inferno Red Quad Cab, G56, KRC 210X cam, SRT8 JGC seats, 35x12.50 Toyo MT's, Offroad lights behind the grill, Warn wireless winch remote, Carli front Diff Guard, Carli Long Travel Air Bags, On board air complete w/ train horns, homemade hidden gooseneck hitch, Homemade locker bypass, upgraded Mopar steering box, Centerforce clutch
1998 Dodge 2500 Laramie, QCSB 4x4. 24V cummins, completely rebuilt chassis with '01 1500 body installed, full gauges, Edge drag comp box, +150hp injectors, performance 47re built by me, 35" Toyo MTs on 3rd gen wheels.
2002 Dodge Ram 1500 ST 4x4 Quad Cab 4.7L Bright Silver, HO Cams, 12,000 lbs Winch mounted behind bumper, 4.56's, 2500 factory tow hooks, 35x12.50 Toyo MT's, Air-Lift Ride Control bags, homemade hidden ball gooseneck hitch.
1987 W100 - carburated 5.7 Hemi/727 combo, 35" Toyo MT's. Ramcharger D44 w/ warn hubs, Warlock seats, 2nd gen center console
1987 Dakota - RCSB, 413 big block, LT headers.
And a few jeeps for good measure.
1998 Dodge 2500 Laramie, QCSB 4x4. 24V cummins, completely rebuilt chassis with '01 1500 body installed, full gauges, Edge drag comp box, +150hp injectors, performance 47re built by me, 35" Toyo MTs on 3rd gen wheels.
2002 Dodge Ram 1500 ST 4x4 Quad Cab 4.7L Bright Silver, HO Cams, 12,000 lbs Winch mounted behind bumper, 4.56's, 2500 factory tow hooks, 35x12.50 Toyo MT's, Air-Lift Ride Control bags, homemade hidden ball gooseneck hitch.
1987 W100 - carburated 5.7 Hemi/727 combo, 35" Toyo MT's. Ramcharger D44 w/ warn hubs, Warlock seats, 2nd gen center console
1987 Dakota - RCSB, 413 big block, LT headers.
And a few jeeps for good measure.