"Welcome Thread"

14PowerWaggy · Post by **14PowerWaggy** » Wed Jun 10, 2015 9:17 am

Jack187 wrote:
14PowerWaggy wrote:No rubbing with 37's... Ok I lied... Had to do some trimming on front fender well and pinch seam but after that no rubbing...
Very nice. What make/model/spec are the tires?

Nitto Trail Grappler MT - 37x12.5x20 - Load Range E

bstefanic · Post by **bstefanic** » Wed Jun 10, 2015 10:05 am

Colibri wrote:Hello everybody! New here, just registered. I know a few of you from the DTX. I have an 09 QCSB that's a work in progress. Glad to be here!

Very nice. What bumper are you running?

Sent from my SM-G900V using Tapatalk

Jack187 · Post by **Jack187** » Wed Jun 10, 2015 8:33 pm

14PowerWaggy wrote:
Jack187 wrote:
14PowerWaggy wrote:No rubbing with 37's... Ok I lied... Had to do some trimming on front fender well and pinch seam but after that no rubbing...
Very nice. What make/model/spec are the tires?
Nitto Trail Grappler MT - 37x12.5x20 - Load Range E

Nice. Thanks for the response. Any chance we can get some frontal and rear shots of the truck? I'm curious how far out the tires extend due to the altered backspace and wider tires size.
Not a big deal since Bushwacker makes various easy to install flares, but i'd like to get an idea od which one i would need if I go to a similar setup. Thanks,

Colibri · Post by **Colibri** » Thu Jun 11, 2015 8:56 am

bstefanic wrote:
Colibri wrote:Hello everybody! New here, just registered. I know a few of you from the DTX. I have an 09 QCSB that's a work in progress. Glad to be here!
Very nice. What bumper are you running?

Sent from my SM-G900V using Tapatalk

Thanks, I'm currently running Aluminess bumpers front and rear. Had em on for about two years and been very happy with them but may be changing over to a tube style soonish.

2wagons1driveway · Post by **2wagons1driveway** » Thu Jun 11, 2015 9:29 am

Colibri wrote:Hello everybody! New here, just registered. I know a few of you from the DTX. I have an 09 QCSB that's a work in progress. Glad to be here!

haha yes work in progress. Anyone who's not needs
To watch this truck!!! Colibri has some awsome ideas and serious wrench time in on this truck!!! Like maybe 5.13's and an 11.5 swap soon....

Try to imagine pugs living in the wild- just roaming in the forest in packs...

14PowerWaggy · Post by **14PowerWaggy** » Thu Jun 11, 2015 10:20 am

Nice. Thanks for the response. Any chance we can get some frontal and rear shots of the truck? I'm curious how far out the tires extend due to the altered backspace and wider tires size.
Not a big deal since Bushwacker makes various easy to install flares, but i'd like to get an idea od which one i would need if I go to a similar setup. Thanks,[/quote]

Here you go... They don't stick out very far at all... I was staying as far away from the "bro truck" look as I could...

Jack187 · Post by **Jack187** » Thu Jun 11, 2015 11:03 am

14PowerWaggy wrote:Nice. Thanks for the response. Any chance we can get some frontal and rear shots of the truck? I'm curious how far out the tires extend due to the altered backspace and wider tires size.
Not a big deal since Bushwacker makes various easy to install flares, but i'd like to get an idea od which one i would need if I go to a similar setup. Thanks,

Here you go... They don't stick out very far at all... I was staying as far away from the "bro truck" look as I could...[/quote]

Much appreciated.

stubiePW · Post by **stubiePW** » Thu Jun 11, 2015 12:37 pm

How do you like the LEDs in place of the fogs?

14PowerWaggy · Post by **14PowerWaggy** » Thu Jun 11, 2015 2:10 pm

stubiePW wrote:How do you like the LEDs in place of the fogs?

I really like them... I have the outside lights turned down just a little so I can use them and not blind the car in front of me... The middle ones are for people that cut me off...

RustyPW · Post by **RustyPW** » Fri Jun 12, 2015 2:13 am

Colibri wrote:
bstefanic wrote:
Colibri wrote:Hello everybody! New here, just registered. I know a few of you from the DTX. I have an 09 QCSB that's a work in progress. Glad to be here!
Very nice. What bumper are you running?

Sent from my SM-G900V using Tapatalk

Thanks, I'm currently running Aluminess bumpers front and rear. Had em on for about two years and been very happy with them but may be changing over to a tube style soonish.

Welcome.

You got a picture of the front bumper? I have an Aluminess front bumper too. Think they only made about 3 of them for the 3G's. LOL And all 3 are on here now.

Colibri · Post by **Colibri** » Fri Jun 12, 2015 2:10 pm

Thanks! Yes sir, here's a front shot of the unicorn bumper lol

RustyPW · Post by **RustyPW** » Fri Jun 12, 2015 8:43 pm

You didn't get the grille guard?

Colibri · Post by **Colibri** » Fri Jun 12, 2015 9:37 pm

Nope, probably the only one they made this way.

2 amigos · Post by **2 amigos** » Mon Jun 22, 2015 1:30 pm

New guy here. Been lurking for a while now and figured I would stop in and say hello. Started my vehicle career with a 1971 Mustang Convertible with a 351C that I built with my father and stepped up to my own when I was 17 to a 1997 Chevy C1500 Extended Cab with the 350 Vortec, 35'' tires, big 10'' lift, 2WD with a detroit locker and an absolute chick magnet. Once I got to college I was driving a ton, and the 10-12mpg I was getting on the truck wasnt going to cut it, so I cut it loose and bought a Honda Accord Coupe V6 (I know, I know). But I built that thing pretty well with a CAI, MDX intake spacer, Lightweight Crank Pulley, RV6 J-Pipe, Borla Exhaust, $1000 sound system, etc etc. Finally I picked up a job as a Operations Manager of a self storage facility, and I have an apartment on site! Saved some money for a while and last November I bit the bullet and found a 2007 Dodge Power Wagon, Quad Cab in Modesto, CA (about 300 miles north of me). So I took a train, struck a deal and she was mine. Ill post the details below.

2007 Dodge Power Wagon
76,000 miles
Factory Options
Leather Interior
Carpet Flooring
ADA Light Group
HD 160 Amp Alternator
Optional Side and Curtain airbags
Heated front seats
Mini Floor Console
Overhead Console w/ Trip Computer (Compass, Temp and MPG)
Front Center Seat Storage
Rear Power Sliding Window
Rear Auto-Dim mirror
Heated Tow Mirrors
Power Windows and Locks
Power Sunroof
Keyless Entry
Alarm System
Keyless Start w/ Tip Start
Dual Climate Control
Woodgrain Interior
Dual Power Seats
Fog Lamps
7-Speaker Infinity Sound System w/ amp
Navigation w/ Sirius Radio
U-Connect Hands Free Bluetooth
Power Adjustable Pedals

Aftermarket Mods
Toyo Open Country M/T 35x12.5R17 Tires
SRT-10 Ram Air Hood
Mopar SRT Ram Air CAI
Firestone Ride-Rite Air Ride System w/ #2241 Dual Control Panel & 9285 Compressor
Sound System W/ C2A-CHY LOC, Dual Kicker Comp 10’’ Subwoofers in custom box, Kicker ZX400.1 400W Amp and Farad capacitor
Dual 2 ¼’’ Flowmaster 40 Exhaust w/ Stainless Steel tips
Line-X Bedliner
Kleinn HK6 Train Air Horn Kit
Autometer A-Pillar Gauge Pod W/ Trans Temp, Dif Temp and Oil Pressure
Superchips Cortex 3950
4ct 6’’ KC #1631 Halogen daylighters on KC#1631 4-tab light bar
Westin Nerf Bars
Chrome Side Body Moldings and Handle Covers
Window Tint
EGR 572455 Wind Deflectors
Aluminum Fuel Door
CB radio w/ 4' antenna
Trailer Brake System
Back up Camera
Smoked out cab lights
Jet Performance 180 Thermostat

RustyPW · Post by **RustyPW** » Mon Jun 22, 2015 7:35 pm

Welcome to the forum. Looks like you're on your way to smoke your credit card.

05PWrockcrawler · Post by **05PWrockcrawler** » Mon Jun 22, 2015 7:47 pm

Very nice and welcome to the family. Now post some pics!

Sent from my iPhone using Tapatalk/hopefully somewhere Offroad!

Jack187 · Post by **Jack187** » Wed Jul 01, 2015 10:53 am

Hi All. I just got my new truck on Friday and I really like it so far. I went with the Brilliant Black Pearlcoat. I was kind of unsure how it would compare with the Gloss Black that was discontinued earlier this year, but I have to admit, I really like it.

RustyPW · Post by **RustyPW** » Wed Jul 01, 2015 4:24 pm

Welcome to the forum.

Post by **AceMan** » Wed Jul 01, 2015 5:53 pm

Beautiful truck. My color, too!

X2 on the welcome to the forum!

squatch · Post by **squatch** » Sat Jul 04, 2015 10:30 am

ordered my first power wagon a month ago. cannot wait for it. dealer says it will be a 16.replacing my 01 2500 cummins. was wondering if anyone has had experience ordering a pw in the past. like to know how long i will be waiting. live in southwest pa.and spend alot of time in elk and clearfield counties observing elk.

Jack187 · Post by **Jack187** » Sun Jul 05, 2015 11:12 am

squatch wrote:ordered my first power wagon a month ago. cannot wait for it. dealer says it will be a 16.replacing my 01 2500 cummins. was wondering if anyone has had experience ordering a pw in the past. like to know how long i will be waiting. live in southwest pa.and spend alot of time in elk and clearfield counties observing elk.

Mine took a little over 7 weeks from the time it was ordered until it arrived on the lot.

RustyPW · Post by **RustyPW** » Sun Jul 05, 2015 6:46 pm

squatch wrote:ordered my first power wagon a month ago. cannot wait for it. dealer says it will be a 16.replacing my 01 2500 cummins. was wondering if anyone has had experience ordering a pw in the past. like to know how long i will be waiting. live in southwest pa.and spend alot of time in elk and clearfield counties observing elk.

Welcome to the forum.

When I ordered mine back in '08. It took 3 weeks.

Where at in SW Pa you live? I'm in Brownsville, on the Mon River. Mon River Rat.

squatch · Post by **squatch** » Sun Jul 05, 2015 9:02 pm

im in scottdale, live out in the country.

RustyPW · Post by **RustyPW** » Mon Jul 06, 2015 12:26 am

squatch wrote:im in scottdale, live out in the country.

Ok. Who you getting the PW from? I got mine from Hillview in Greensburg. Believe Kevin was the salesman.

squatch · Post by **squatch** » Mon Jul 06, 2015 5:51 am

getting it from ron lewis ram in waynesburg.

Power Wagon Registry

"Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re:

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re:

Re: Re:

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"

Re: "Welcome Thread"