"OX" build
Re: "OX" build
Truck is sweet! Would you mind measuring from the center of your front hub, to the bottom of your fender flare? I would like to see how much height one could expect to gain going with the Thuren 3" coils. Thanks!
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
Re: "OX" build
I took sperate measurements one from center line of the wheel and one from the top of the upper ball joint. hope this helps.Juday wrote:Truck is sweet! Would you mind measuring from the center of your front hub, to the bottom of your fender flare? I would like to see how much height one could expect to gain going with the Thuren 3" coils. Thanks!
also remember I probably have about 150lbs of additional bumpers so I guess that comes down to maybe a half inch of clearance I lost with the weight change.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
Re: "OX" build
They are from the supposed 3 inch "lift" coils and you gained that much?! Measuring mine, that would be almost a 3 inch lift OVER the already "higher" Power Wagon springs!
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
Re: "OX" build
Yes, it was suppose to lift my truck approximately 3 inch from my stock height. Looking at the 4G PWs, the suspension looks like they sit lower than the 3G. Not sure, it could just look that way.
Juday, curious, what was your measurements?
Any 3G guys that still have no llift want to post some measurements as well to see to see what the stock height should be?
Juday, curious, what was your measurements?
Any 3G guys that still have no llift want to post some measurements as well to see to see what the stock height should be?
Juday wrote:They are from the supposed 3 inch "lift" coils and you gained that much?! Measuring mine, that would be almost a 3 inch lift OVER the already "higher" Power Wagon springs!
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- TrueCowboy426
- 250_Posts
- Posts: 322
- Joined: Mon May 21, 2012 9:00 pm
- Location: Woodstock, ON Canada
Re: "OX" build
I'm still stock suspension and I measure out 25-1/2" from center of hub to bottom of flare.
2007 Dodge Power Wagon - Inferno Red Quad Cab, G56, KRC 210X cam, SRT8 JGC seats, 35x12.50 Toyo MT's, Offroad lights behind the grill, Warn wireless winch remote, Carli front Diff Guard, Carli Long Travel Air Bags, On board air complete w/ train horns, homemade hidden gooseneck hitch, Homemade locker bypass, upgraded Mopar steering box, Centerforce clutch
1998 Dodge 2500 Laramie, QCSB 4x4. 24V cummins, completely rebuilt chassis with '01 1500 body installed, full gauges, Edge drag comp box, +150hp injectors, performance 47re built by me, 35" Toyo MTs on 3rd gen wheels.
2002 Dodge Ram 1500 ST 4x4 Quad Cab 4.7L Bright Silver, HO Cams, 12,000 lbs Winch mounted behind bumper, 4.56's, 2500 factory tow hooks, 35x12.50 Toyo MT's, Air-Lift Ride Control bags, homemade hidden ball gooseneck hitch.
1987 W100 - carburated 5.7 Hemi/727 combo, 35" Toyo MT's. Ramcharger D44 w/ warn hubs, Warlock seats, 2nd gen center console
1987 Dakota - RCSB, 413 big block, LT headers.
And a few jeeps for good measure.
1998 Dodge 2500 Laramie, QCSB 4x4. 24V cummins, completely rebuilt chassis with '01 1500 body installed, full gauges, Edge drag comp box, +150hp injectors, performance 47re built by me, 35" Toyo MTs on 3rd gen wheels.
2002 Dodge Ram 1500 ST 4x4 Quad Cab 4.7L Bright Silver, HO Cams, 12,000 lbs Winch mounted behind bumper, 4.56's, 2500 factory tow hooks, 35x12.50 Toyo MT's, Air-Lift Ride Control bags, homemade hidden ball gooseneck hitch.
1987 W100 - carburated 5.7 Hemi/727 combo, 35" Toyo MT's. Ramcharger D44 w/ warn hubs, Warlock seats, 2nd gen center console
1987 Dakota - RCSB, 413 big block, LT headers.
And a few jeeps for good measure.
Re: "OX" build
Well I have been enjoying my new boat which has taken up all my time. Can't wait till the weekend as I will be out once again preparing for a kingfish tournament this coming memorial day
Well, I have noticed a leak on my front axle, and wouldn't you know it my axle seal is bad on the front passanger side. Did you also know that you have to dissasemble the entire axle assy to get to that damn seal? Tis is when I wish I was still working at Valvo where I had all the special tools to do this type of work Well, going to be calling dodge tomorrow to see how much this is going to cost me.
I now have a rear locker bad and a front axle seal. What is next?
Well, I have noticed a leak on my front axle, and wouldn't you know it my axle seal is bad on the front passanger side. Did you also know that you have to dissasemble the entire axle assy to get to that damn seal? Tis is when I wish I was still working at Valvo where I had all the special tools to do this type of work Well, going to be calling dodge tomorrow to see how much this is going to cost me.
I now have a rear locker bad and a front axle seal. What is next?
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- VA_Wagon Man
- 500_Posts
- Posts: 737
- Joined: Mon May 21, 2012 10:54 am
- Location: Virginia
Re: "OX" build
That blows. My estimate was close to a$1000 when mine was leaking. They said it was better to do BOTH while you have it all torn apart. I got a Steal and it only came to just under $500, but then my insurance picked up the tab because of my deer wreck. Gl, and let us know what happens.
Sent from the middle of nowhere.
Sent from the middle of nowhere.
Long Gone:
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,
Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!
"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--
'05 Silver Power Wagon: # 869: Custom Rear Hitch & Bed Clearance Mod, Custom Front and Rear Tubular Bumpers, Airflow 3rd Gen Snorkel, Diablo Sport Predator, 35x12.50 Nitto Mud Grappler Extreme Terrain, Flow Master 40, Mopar Rock Rails, Warn 15,000lb Winch,with Thermal Bypass, 4.56 Locking front and rear Diffs, Sway-bar disconnect, Uprgraded " T " steering linkage, Fully Skid plated with fore and aft bars, Carli Front Diff Protector, RockCrusher Rear Diff Pro, Bilstein 5100's with rear Custom Valving, Pit Slave Winch Strap, CajunPW PNP Locker By-Pass,
Follow Me, I'll Pull You Out...AFTER you pull me out......
Rausch Creek 2010 Fall Run
Rausch Creek 2011 Spring Run
Rausch Creek 2011 Fall Run
Rausch Creek 2012 Spring Run
Future Rausch Creek 2013 Spring Run June 22nd!
"There is no hunting, like the hunting of man, and those who have hunted armed men long enough, and liked it, never cared for anything else thereafter." --Earnest Hemmingway--
-
- 2000_Posts
- Posts: 5430
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: "OX" build
I feel bad for you Danny. Think the PW is jealous of the boat. You get boat, PW starts to break. You make the connection.
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
Re: "OX" build
I measured my stock height 4G in at 24.5" from the center of the hub, to the fender flare.RedMan wrote:Juday, curious, what was your measurements?
So, it's 1" shorter than the stock height 3G PW and 3.25" shorter than the 3" coils from Thuren.....WOW!
2012 RAM Power Wagon
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
315/70R17 Goodyear Wrangler MTR w/ Kevlar | Carli Front Differential Cover | Aluminess Front Bumper | Aluminess Rock Sliders | PIAA 540 Fog Lights | 1" Daystar Lift | Thuren High Clearance Control Arms | Thuren Track Bar
Two roads diverged in a wood, and I --
I took the one less travelled by,
and that has made all the difference
Re: "OX" build
Yea. you have a point, I was talking a lot about getting a boat and what we would be doing on the boat and OX must have really been listening and started to put two and two together which means less and less of me and her spending time together on the trails and more time of her sitting in a parking lot waiting for me to return from fishing. The seal must have been her crying about her nightmare coming true.RustyPW wrote:I feel bad for you Danny. Think the PW is jealous of the boat. You get boat, PW starts to break. You make the connection.
Well, I think she has realized that it is not all that bad, because anytime I do anything with the boat I do it with her, and that without her the boat would be useless as it would sit in the yard.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
Re: "OX" build
Well there goes the measurements for the 4G, and 3G guys out there want to post their measurements as well?Juday wrote:I measured my stock height 4G in at 24.5" from the center of the hub, to the fender flare.RedMan wrote:Juday, curious, what was your measurements?
So, it's 1" shorter than the stock height 3G PW and 3.25" shorter than the 3" coils from Thuren.....WOW!
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
-
- 250_Posts
- Posts: 262
- Joined: Sat Jul 20, 2013 9:50 pm
- Location: Cheyenne,Wy
Re: "OX" build
I'll post before/stock and after with Carli coils on my 2012. When I finally get time to install all the new goodies. Have to find a good mule deer buck first!
Sent from my iPhone using Tapatalk - now Free
Sent from my iPhone using Tapatalk - now Free
Carl Scott: Black 2012 PW 35/12.50/17 Nitto Mud Grappler. Thuren control arms. Carli 3" Hmei coils. Carli Track bar. Magnaflow dual inlet/single outlet muffler. Front window tint. Clear Bra. Cold air intake. Hard wired lockers. All options but leather and dual climate
Re: "OX" build
Danny, I know you are always busy, so i am in no hurry for this. I am wondering if you have them, could you please list the part #'s for your suspension upgrades ? Front coils, shocks, swaybar end links & shackles. If you could, that would be GREAT. Seeing as how i want to do mine is the same as you did yours. Thanks a bunch for doing this, if you can.
Re: "OX" build
send an email addres and i will, send you the info.TwinStick wrote:Danny, I know you are always busy, so i am in no hurry for this. I am wondering if you have them, could you please list the part #'s for your suspension upgrades ? Front coils, shocks, swaybar end links & shackles. If you could, that would be GREAT. Seeing as how i want to do mine is the same as you did yours. Thanks a bunch for doing this, if you can.
I might have all the information in this thread, look towards the front of the thread.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
Re: "OX" build
Gentlemen
I am needing you help in finding these parts. Can you help me out and send me links where you can order these from?
PSC ram assist
DT Pro Fab steering brace
EBC breaks and rotors
Yukon free spin hubs
RCV axle shafts
Dynatrac ball joints
Thanks for the help
I am needing you help in finding these parts. Can you help me out and send me links where you can order these from?
PSC ram assist
DT Pro Fab steering brace
EBC breaks and rotors
Yukon free spin hubs
RCV axle shafts
Dynatrac ball joints
Thanks for the help
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- bstefanic
- 500_Posts
- Posts: 847
- Joined: Tue May 29, 2012 1:42 pm
- Model Year: 2006
- Location: Chesapeake, VA
Re: "OX" build
8lugtruckgear.com is a good place for the Dynatrac ball joints and if you call them up they can give you Dynatracs military discount also.RedMan wrote:Gentlemen
I am needing you help in finding these parts. Can you help me out and send me links where you can order these from?
PSC ram assist
DT Pro Fab steering brace
EBC breaks and rotors
Yukon free spin hubs
RCV axle shafts
Dynatrac ball joints
Thanks for the help
Old '06 PW (Sold)- BDS Long Arm Kit, 37" Interco M16's, ATX Cornice Wheels, DT Pro Fab steering box brace, Dynatrac Ball Joints, SY Eliminated Transfer Case, Custom Tom Wood's DS, Dynatrac Free Spin Hubs
'13 Cummins - 4.56s, front ARB locker, Thuren Alien Arms, Stage 6 king 3.0's, LT leafs, 40"s on Trail Ready's
'13 Cummins - 4.56s, front ARB locker, Thuren Alien Arms, Stage 6 king 3.0's, LT leafs, 40"s on Trail Ready's
- 05PWrockcrawler
- 1000_Posts
- Posts: 1898
- Joined: Sat Mar 30, 2013 10:56 pm
Re: "OX" build
That's all the stuff I have on my truck. Awesome list of parts. I will try to find some of my receipts. Took me a long time to find the Yukon kit cheap. The RCV's are the same price everywhere. Dynatrac ball joints were $599 or $699 can't remember. Got them from 8 lug.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re:
Thanks let me know if you find some good places with prices?05PWrockcrawler wrote:That's all the stuff I have on my truck. Awesome list of parts. I will try to find some of my receipts. Took me a long time to find the Yukon kit cheap. The RCV's are the same price everywhere. Dynatrac ball joints were $599 or $699 can't remember. Got them from 8 lug.
Sent from my iPhone using Tapatalk
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
Re: "OX" build
Well after some debate I decided to go with the Thuren steering upgrade, navigation system, and new meat on the ground, and yes I stayed with the same size and make tires.
I also decided to put some upgrades on my boat, T-Top and trolling motor
I also decided to put some upgrades on my boat, T-Top and trolling motor
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- 04Ram2500Hemi
- 2000_Posts
- Posts: 2212
- Joined: Thu May 31, 2012 12:19 pm
- Model Year: 2012
- Location: Missoula, MT
Re: "OX" build
I think the one thing this build thread is missing is better pictures of the front and rear bumper setup.
Gone but Never Forgotten
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3
2012 Ram Power Wagon: viewtopic.php?f=13&t=107
Truxedo Deuce Bed Cover with Bed Lights, Black Line-X Rocker Panel, Custom Built Rock Rails Sprayed with Line-X, Front & Rear Bumper and Grill sprayed with Line-X, Husky Mud Flaps, Husky Floor Mats, Four VisionX Xmitter Low Pro Prime XP LED Light Bars Behind the Grill, LED Lights Mounted in the Rear Bumper, Heated Seats, Interior LED Lighting, NAV-TV, Camera Mounted in Front Grill, Custom Headache Rack, AEV Raised Air Intake, AEV Salta HD Wheels in Onyx, 285/75/17 Cooper Discoverer AT3
Re: "OX" build
I will try and get some better pics of the bumper and how it is built. I can say this... the bumpers are designed so that if I want to remove them I can04Ram2500Hemi wrote:I think the one thing this build thread is missing is better pictures of the front and rear bumper setup.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
Re: "OX" build
OK, here is the next part of my setup
I know what you're thinking... and this is not a permanent fix, this is something I will throw on OX when I need to make a long ride while towing my boat or anything else. The reason I did this is because with the modification of my bumper and the departure angle now a lot better, this also allows a lot of road debris to hit what ever I am pulling. The flaps mount to my hitch and can easily be removed with two nuts being removed.
I know what you're thinking... and this is not a permanent fix, this is something I will throw on OX when I need to make a long ride while towing my boat or anything else. The reason I did this is because with the modification of my bumper and the departure angle now a lot better, this also allows a lot of road debris to hit what ever I am pulling. The flaps mount to my hitch and can easily be removed with two nuts being removed.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
Re: "OX" build
Oh yea... I also had to make my own drop hitch because the longest one I could find was 8" and I needed 10"
RedMan wrote:OK, here is the next part of my setup
I know what you're thinking... and this is not a permanent fix, this is something I will throw on OX when I need to make a long ride while towing my boat or anything else. The reason I did this is because with the modification of my bumper and the departure angle now a lot better, this also allows a lot of road debris to hit what ever I am pulling. The flaps mount to my hitch and can easily be removed with two nuts being removed.
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
Re: "OX" build
sweet…just made me thirsty…whats in that right hand..
Re: "OX" build
New Castle... you cannot work on the truck and not have something to keep your thirst quenched right?w2dodge wrote:sweet…just made me thirsty…whats in that right hand..
Power Wagon Registry #47
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater
- SCT Tuner by http://www.hemifevertuning.com/
- Thuren suspension upgrade (springs, shocks, and shackles)
- Thuren steering upgrade
- DT PROFAB Swaybar links (w/ +2" lift)
- Wattsenegger Front & Rear bumpers (1/4" walls)
- 35 12.50R 17 NITTO Mud Grapplers (second set)__- Snorkel
- Rock Rails_______________________- CB Radio
- RockCrusher Front Diff Cover_______- Tool box and all necessary tools
- diff locker manual switch's_______________ - Flow Master Series 50 Dual Exhaust
- Illuminated Ram Hood Emblem______- Rocker Panels Hurculined
- H2 Wheels w/moded hubcaps_______- Power Wagon Winch Strap
- Solar Battery Maintainer___________- Hide-Away Gun rack
"The" Wifes Car
"Faith" 2014 Charger RT Max
My Toy
"VISCO" 2013 196CC Tidewater