Abel Components Locker Bypass® $450
-
- 2000_Posts
- Posts: 5440
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Hmmmmmmm................
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
-
- Posts: 24
- Joined: Fri Jan 25, 2019 12:48 pm
- Model Year: 2018
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Well shit the bed do u take returns for a never used never unwrapped never installed locker bypass LOLRetired BLM Rig wrote: ↑Tue Oct 15, 2019 4:03 pmThis one only bypasses the locker part of the system, but I just developed a new system that removes the factory SmartBar module completely and replaces it with a “Full SmartBar Bypass”, all controlled from the O.E. switches. I’ve been so busy I haven’t had time to start a new thread. It’s a combination of this locker bypass and the new electric sway bar disconnect I’ve been working on. I just finished a 3rd Gen unit for a customer with a dead system and I’m building the first 4th Gen unit.06wagon wrote: ↑Tue Oct 15, 2019 10:14 amQuick question..... What if the factory smartbar is bad? Will this bypass the whole thing? I'm currently getting all kinds of traction control, service electronic braking system warnings on my 2016. I have the smartbar unplugged for the lockers and swaybar (all warning lights have stopped). I'm just curious if using this will keep me from having to replace the whole thing.
It requires a completely different control box and wire harness layout, so it’s completely different than the Locker Bypass that this thread is about. There’s a picture of the new control box in the thread titled “Locker Bypass Improvements”.
There’s already a waiting list, I’m working as fast as I can.
$649
2018 tradesman power wagon
Omaha orange
Omaha orange
-
- 2000_Posts
- Posts: 5440
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: FS: Abel Components Locker Bypass® - Calif. - $450
That's what I was thinking about. As I haven't yet installed mine either.BULLITT1204 wrote: ↑Tue Oct 15, 2019 7:58 pmWell shit the bed do u take returns for a never used never unwrapped never installed locker bypass LOLRetired BLM Rig wrote: ↑Tue Oct 15, 2019 4:03 pmThis one only bypasses the locker part of the system, but I just developed a new system that removes the factory SmartBar module completely and replaces it with a “Full SmartBar Bypass”, all controlled from the O.E. switches. I’ve been so busy I haven’t had time to start a new thread. It’s a combination of this locker bypass and the new electric sway bar disconnect I’ve been working on. I just finished a 3rd Gen unit for a customer with a dead system and I’m building the first 4th Gen unit.06wagon wrote: ↑Tue Oct 15, 2019 10:14 amQuick question..... What if the factory smartbar is bad? Will this bypass the whole thing? I'm currently getting all kinds of traction control, service electronic braking system warnings on my 2016. I have the smartbar unplugged for the lockers and swaybar (all warning lights have stopped). I'm just curious if using this will keep me from having to replace the whole thing.
It requires a completely different control box and wire harness layout, so it’s completely different than the Locker Bypass that this thread is about. There’s a picture of the new control box in the thread titled “Locker Bypass Improvements”.
There’s already a waiting list, I’m working as fast as I can.
$649
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
Re: FS: Abel Components Locker Bypass® - Calif. - $450
So does this new bypass work for disconnect sway bar in any mode same as the lockers?
Sent from my SM-N960W using Tapatalk
Sent from my SM-N960W using Tapatalk
-
- Posts: 24
- Joined: Fri Jan 25, 2019 12:48 pm
- Model Year: 2018
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Right lol i just have only used my lockers for 1 event this summer and didnt really have issues with them engaging right away so i never installed it lol.. seems like once i was in loose dirt/clay they locked up right away but this kit is more enticing cuz id love to have a swap bar dissconnect to have it off in 2wd when i dont need 4x on dirt roads... or maybe cleveland site streets thesd roads are bad hereRustyPW wrote: ↑Tue Oct 15, 2019 8:03 pmThat's what I was thinking about. As I haven't yet installed mine either.BULLITT1204 wrote: ↑Tue Oct 15, 2019 7:58 pmWell shit the bed do u take returns for a never used never unwrapped never installed locker bypass LOLRetired BLM Rig wrote: ↑Tue Oct 15, 2019 4:03 pmThis one only bypasses the locker part of the system, but I just developed a new system that removes the factory SmartBar module completely and replaces it with a “Full SmartBar Bypass”, all controlled from the O.E. switches. I’ve been so busy I haven’t had time to start a new thread. It’s a combination of this locker bypass and the new electric sway bar disconnect I’ve been working on. I just finished a 3rd Gen unit for a customer with a dead system and I’m building the first 4th Gen unit.06wagon wrote: ↑Tue Oct 15, 2019 10:14 amQuick question..... What if the factory smartbar is bad? Will this bypass the whole thing? I'm currently getting all kinds of traction control, service electronic braking system warnings on my 2016. I have the smartbar unplugged for the lockers and swaybar (all warning lights have stopped). I'm just curious if using this will keep me from having to replace the whole thing.
It requires a completely different control box and wire harness layout, so it’s completely different than the Locker Bypass that this thread is about. There’s a picture of the new control box in the thread titled “Locker Bypass Improvements”.
There’s already a waiting list, I’m working as fast as I can.
$649
2018 tradesman power wagon
Omaha orange
Omaha orange
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: FS: Abel Components Locker Bypass® - Calif. - $450
For those of you that already have a Morgan, Shelby or Abel Locker Bypass: There's a retrofit upgrade coming that will give you the ability to control your sway bar at will also.
Last edited by Retired BLM Rig on Thu Oct 17, 2019 10:13 am, edited 2 times in total.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Nice I'll have to get me one of those when they come out
Sent from my SM-N960W using Tapatalk
Sent from my SM-N960W using Tapatalk
-
- 2000_Posts
- Posts: 5440
- Joined: Thu May 24, 2012 4:23 pm
- Model Year: 2008
- Location: Brownsville Pa.
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Retired BLM Rig wrote: ↑Thu Oct 17, 2019 9:25 amFor those of you that already have a Morgan, Shelby or Abel Locker Bypass: There's a retrofit upgrade coming that will give you the ability to control your sway bar at will also.
I have all 3 of those bypasses. Morgan is in the PW for now.
PWOC #53
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
2008 POWER WAGON RC
My build thread. http://forum.powerwagonregistry.org/vie ... =13&t=2826
Moab '09, '10, '12, '14.
Rausch Creek - Summer '10, Spring-Fall '11, Spring '12, Summer '13, Summer '14, Summer '15, Summer '16, Summer '17, Summer '18, Summer '20, Summer '22,
AOAA Summer '19.
Russ
NRA - Benefactor, Golden Eagle.
-
- Posts: 1
- Joined: Wed Nov 13, 2019 5:50 pm
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Hi, I have a 2005 Power Wagon. I'd like to order one of your bypasses. Please let me know how to proceed, thanks!
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Hi Max, welcome to the forum! I sent you a private message.maxoverload wrote: ↑Wed Nov 13, 2019 5:54 pmHi, I have a 2005 Power Wagon. I'd like to order one of your bypasses. Please let me know how to proceed, thanks!
If you prefer email you can reach me at: AbelComponents@yahoo.com
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Sweet! Like some of those above I haven't put mine on yet (although slow it has been engaging) with the complete override of the sway bar disconnect added I will for sure be putting it on! I'll shoot an email to get on your list - thanks!Retired BLM Rig wrote: ↑Thu Oct 17, 2019 9:25 amFor those of you that already have a Morgan, Shelby or Abel Locker Bypass: There's a retrofit upgrade coming that will give you the ability to control your sway bar at will also.
Roaming the back roads of southern Nevada...............
2016 Jeep Willys - sold
2017 Jeep Rubicon - sold
2018 Power Wagon
K&N steel tube intake
Solo muffler delete
Locker bypass - received, time to get off my duff and install
2016 Jeep Willys - sold
2017 Jeep Rubicon - sold
2018 Power Wagon
K&N steel tube intake
Solo muffler delete
Locker bypass - received, time to get off my duff and install
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Is this an upgrade to the one you created? Is there a writeup on it? I haven't actually installed mine yet... so if I could control the sway bar that'd be amazing without the speed limiter.Retired BLM Rig wrote:For those of you that already have a Morgan, Shelby or Abel Locker Bypass: There's a retrofit upgrade coming that will give you the ability to control your sway bar at will also.
Sent from my SM-N976V using Tapatalk
2016 Granite Crystal Metallic Power Wagon Laramie, graphics delete, debadged, Thuren front and rear coils, Thuren rear swaybar links, Thuren front and rear trackbars, Traxada rear 1 inch spacers, King 3.0 (Stage 4) front and 2.5 (Stage 3) rear shocks, Boogie front bump stops, Cooper STT Pro 37x13.50R17 on XD Machette 17x9 +18 wheels, Centramatics, 5.13 gears, DOR steering brace, Thuren truss, Thuren King Steering Damper, Synergy Steering Kit, Thuren PW front bumper, Thuren rear bumper, White Knuckle rock sliders, Dethloff skid plate, Dethloff rear sway bar spacers, Purple Cranium Half Spider front and rear diff guards, Airlift 5000 Ultimate airbags with Daystar cradles, Bakflip Revolver X2 tonneau, Factor55 Ultrahook with 100ft 7/16 A.R.E. Spidersilk synthetic winch line, Zroadz Grill with slim 20 inch light bar, DDM Tuning LEDs/HIDs, Rigid Side Shooter ditch lights, KC rock lights, Rigid fog lights, Baja Designs rear lights, Magnaflow 19200 modified with upgraded resonator and after axle dump, tinted front windows 35%.
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Sorry TankerZak, I see that I forgot to respond to your questions:TankerZak wrote: ↑Thu Nov 14, 2019 9:20 pmIs this an upgrade to the one you created? Is there a writeup on it? I haven't actually installed mine yet... so if I could control the sway bar that'd be amazing without the speed limiter.Retired BLM Rig wrote:For those of you that already have a Morgan, Shelby or Abel Locker Bypass: There's a retrofit upgrade coming that will give you the ability to control your sway bar at will also.
Sent from my SM-N976V using Tapatalk
Here's a link to the Sway Bar Bypass prototype thread.
Here's a link to the actual item listed for sale.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
- ScubaSteve
- 50_Posts
- Posts: 76
- Joined: Fri Jun 28, 2019 10:40 am
- Model Year: 2016
- Location: Kansas City, MO
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Hey, I just wanted to post up in here that I received my locker and nanny bypass on Christmas Eve. So far I have only looked through the contents, but I must say I am thoroughly impressed by the professional quality of the kit. The packaging, labeling, and assembly of the harness is impeccable and better than OEM quality. Of course I have not been able to confirm the functionality, but I have zero doubts currently.
Thanks BLM Rig!
Thanks BLM Rig!
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Thank you Steve, glad to be of service. Satisfaction guaranteed or your money back.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
-
- Posts: 1
- Joined: Sun Dec 29, 2019 3:52 pm
- Model Year: 2006
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Are you still making these
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: FS: Abel Components Locker Bypass® - Calif. - $450
Yep, still making them. Whenever you're ready just shoot me an email: AbelComponents@yahoo.com
Email works better than PM, then I can provide installation instruction PDF files for you to look at and consider.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
-
- 50_Posts
- Posts: 59
- Joined: Thu May 09, 2019 7:14 am
- Model Year: 2018
Re: FS: Abel Components Locker Bypass® - Calif. - $450
I bought my locker bypass in July but never installed it. I know I read some instructions but I can't remember if it was online or if they came with it?
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: FS: Abel Components Locker Bypass® - Calif. - $450
The original 4th Gen installation instructions are available here. This system has been updated and now mounts inside the cab. To get a copy of the new installation instructions, send me an email: AbelComponents@yahoo.comTommyDuncan wrote: ↑Fri Jan 03, 2020 9:26 pmI bought my locker bypass in July but never installed it. I know I read some instructions but I can't remember if it was online or if they came with it?
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: Abel Components Locker Bypass® $450
Please put me on the list for purchase. 2018 Power Wagon and I'm in Canada.
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: Abel Components Locker Bypass® $450
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
- ScubaSteve
- 50_Posts
- Posts: 76
- Joined: Fri Jun 28, 2019 10:40 am
- Model Year: 2016
- Location: Kansas City, MO
Re: Abel Components Locker Bypass® $450
I don't want to clutter up your vendor thread, but I just wanted to mention since I had a chance to install the bypass last night, that it was a cinch. The build quality and forethought involved with the way you produced the wiring harness is incredible for what I consider essentially a home-brew product. Ran everything according to the instructions (aside from the rear locker harness, I did run that inside the chassis frame rail parallel to the main chassis harness on the driver's side and still had some length to spare), plugged the box in and with 2 simple adjustments had full control over the truck as I should have had from the factory.
Thanks again BLM!
Thanks again BLM!
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: Abel Components Locker Bypass® $450
Thanks Steve! Enjoy your new found freedom and less frustration.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
Re: Abel Components Locker Bypass® $450
Does this work on the 2019/2020 5th Gen models?
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: Abel Components Locker Bypass® $450
A lot has changed with the 2019, the lockers are now wired into the controller area network (CAN-Bus) data stream, so the only way to manipulate them now is to modify the software or hardwire them with separate switches.
The good news is that the locker bypass isn't really as necessary on the 2019s as it was on the older trucks, due to the fact that, starting in 2019, RAM now allows the rear locker to work in 2WD & 4HI. This was one of the major complaints on the older trucks that caused the need/desire for a locker bypass.
Long story short, I don't have a locker bypass for the 2019 and don’t really have any plans to develop one, since all the new owners seem to be satisfied with the function of the new factory system.
Are you having issues with the engagement of the lockers on your truck? If a problem arises and there is a demand for a solution, I’ll do my best to meet the challenge, but at this point no one has complained about the locker function on the 19+ trucks.
Thanks for asking.
The good news is that the locker bypass isn't really as necessary on the 2019s as it was on the older trucks, due to the fact that, starting in 2019, RAM now allows the rear locker to work in 2WD & 4HI. This was one of the major complaints on the older trucks that caused the need/desire for a locker bypass.
Long story short, I don't have a locker bypass for the 2019 and don’t really have any plans to develop one, since all the new owners seem to be satisfied with the function of the new factory system.
Are you having issues with the engagement of the lockers on your truck? If a problem arises and there is a demand for a solution, I’ll do my best to meet the challenge, but at this point no one has complained about the locker function on the 19+ trucks.
Thanks for asking.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!