Setting locker air gap

Discussions including Electrical / Lighting & Accessories / Onboard Air
Post Reply
AllanDickerson
50_Posts
50_Posts
Posts: 99
Joined: Thu Jan 09, 2014 3:19 pm
Location: South Carolina

Setting locker air gap

Post by AllanDickerson » Sat Sep 07, 2019 7:01 pm

I have had the typical flashing locker light on my 05 for years and I'm going to try and set the air gap and see if it helps. My question is how do you energize the locker to set the gap if the lockers wont engage? Do you just run wires from the trucks batteries and hook them up to the positive and negative leads on the plug on the rear differential?

trk4sale
50_Posts
50_Posts
Posts: 135
Joined: Thu May 24, 2012 9:01 am
Location: Orange County, CA

Re: Setting locker air gap

Post by trk4sale » Sun Sep 08, 2019 8:45 am

I believe the gap is set in the unlocked position, but have no idea what it's supposed to be. Your best option is to hardwire the lockers. You can unplug the switch and live with the SERV4WD light or get a the bypass kit from Retired BLM Rig
viewtopic.php?f=43&t=5876
Preview



2005 white Q.C. Power Wagon #1716
AEM Brute Force intake
Gibson CAT back exhaust
Super Chips Flashpac Tuner
Wet Okole seat covers
35" Nitto Trail Grappler Tires
Line-X bed coating
Trac Rac Sliding Lumber Rack
Dual Batteries w/ Hellroaring Technologies Isolator/Combiner
Extreme Outback Magnum on board air compressor
H2 rims

Post Reply