I ripped the wires out of my front harness where it attaches to the front differential. New harness is a month away. I can fix this one but only know for sure the location of 1 wire.
Can someone please take a picture of the four wires location as they enter the harness st the diff? Thanks for the help!
Front Locker Disconnect harness
-
- Posts: 4
- Joined: Sat Apr 13, 2019 3:14 pm
- Model Year: 2018
-
- 250_Posts
- Posts: 307
- Joined: Thu Oct 19, 2017 4:32 pm
- Model Year: 2018
- Location: Albuquerque
Re: Front Locker Disconnect harness
Of course they are out of stock, but there is a wiring USB that Mopar is releasing.
https://www.techauthority.com/en-us/pro ... 855&type=7
The 2017 is in stock, but don't know how much difference there is.
https://www.techauthority.com/en-us/pro ... 855&type=7
The 2017 is in stock, but don't know how much difference there is.
2018 White Rambox, Diamondback HD bed cover, White Knuckle sliders, Carli and Purple Cranium diff guards, masterpull 11mm superline, 37 Toyo MT.
- OffroadTreks
- Moderator
- Posts: 2409
- Joined: Fri Mar 25, 2016 11:23 am
- Model Year: 2015
- Location: USA
- Contact:
Re: Front Locker Disconnect harness
Just search the forum. The answer is here already. Locker Bypass has all the diagrams. That has been the same for a long while. Nothing different there on your wire than my 2015 from what I see. All the same colors too. I have a video even talking about those wires.Ajchampion2018 wrote: ↑Sat Apr 13, 2019 3:26 pmI ripped the wires out of my front harness where it attaches to the front differential. New harness is a month away. I can fix this one but only know for sure the location of 1 wire.
Can someone please take a picture of the four wires location as they enter the harness st the diff? Thanks for the help!25930504-6F0C-4BB2-B293-57CCB1AC2A8A.jpeg
2015 Power Wagon Laramie - "ROCKLANDER"
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
-------
[Build Thread] [Instagram] [Youtube]
------
Full-Size Off-Road Events & Overland Adventures
- Retired BLM Rig
- 1000_Posts
- Posts: 1123
- Joined: Sun Jan 31, 2016 6:51 pm
- Model Year: 2008
- Location: State of Jefferson
Re: Front Locker Disconnect harness
Welcome to the forum Ajchampion2018!
Here's the place to find the connector pin positions for the wires, including color and wire gauge size.
Here's a source for the connector housing and terminals that you need. Select 4 pin female w/terminals.
This is the terminal crimping tool you need to do the job right.
Here's the place to find the connector pin positions for the wires, including color and wire gauge size.
Here's a source for the connector housing and terminals that you need. Select 4 pin female w/terminals.
This is the terminal crimping tool you need to do the job right.
2008 Quad Cab - Stock RTI = 655, curb weight = 6081 lbs. Abel Components Plug & Play Locker Bypass®, Abel Components Full SmartBar Bypass®, Abel Components Nanny Kill Switch®, 2000 Watt ProMariner TruePower Plus Pure Sine Wave Inverter, Trailer Hitch Storage, MOLLE Door Panels, Wilton Hitch Vice, Locking Under Seat Storage Drawer, Smittybilt 2781 Air Compressor, 14K PullPal, Hi-Lift First Responder Jack, 25' Jumper Cable System, Slip Yoke Eliminator in a Can, Evolution vs. God, Share the Umbrella, Make sure you're right with God before you meet him!
-
- Posts: 4
- Joined: Sat Apr 13, 2019 3:14 pm
- Model Year: 2018
Re: Front Locker Disconnect harness
Thank you for the diagram. It all makes sense, but I have a yellow wire with a grey tracer. The diagram describes it as yellow/bu. The other three match and there’s only one wire left, but I’d rather be sure than assume. Thanks
- coder
- 1000_Posts
- Posts: 1347
- Joined: Wed Jun 06, 2012 5:18 pm
- Model Year: 2007
- Location: Trabuco Canyon, CA
Re: Front Locker Disconnect harness
Here's a link and screen-shot of the front locker harness connector replacement kit it has the colors of the wires mapped to the connector.
Link to the Mopar harness connector site.
https://connectorrepairkit.mopar.com
Link to the Mopar harness connector site.
https://connectorrepairkit.mopar.com
- Attachments
-
- 2018 PW Locker Harness Kit.png (32.68 KiB) Viewed 1588 times
Vehicle: 2007 Power Wagon Quad Cab - Factory Options (Inferno Red, Premium Cloth Bench Seat, Light Group, Automatic Transmission, Leather Steering Wheel)
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass
Suspension: Carli 3" Hemi Coils, Carli Control Arms, Carli King 2.5 Pin-Tops, Carli Stainless Steering Stabilizer, Carli Trackbar | Synergy 1" Rear Shackle
Performance: Magnaflow Muffler | Magnaflow Y-Pipe
Wheels/Tires: Yokohama X-A/T 35x12.5x17
Steering/Drivetrain/Axles: Carli Front Diff Guard | Dynatrac Ball Joints | Mopar HD Steering Gear
Miscellaneous: Line-X Bedliner | Locker Bypass Switch | Mopar Rock Rails | Odyssey Extreme 65-PC1750T | Performance Friction Brake Pads | Weathertech Digital Fit Mats | Winch Thermal Protection Bypass